 |
Matronics Email Lists
Web Forum Interface to the Matronics Email Lists
|
| View previous topic :: View next topic |
| Author |
Message |
Mark Phillips in TN
Joined: 10 Jan 2006
Posts: 431
Location: Columbia, TN
|
 Posted: Thu Jan 10, 2008 9:20 pm Post subject: Question about Annunciating Lights |
 |
|
In a message dated 01/10/2008 8:21:26 AM Central Standard Time, bferrell(at)123mail.net writes:
| Quote: |
I made my panel out of Honeywell microswitches. |
>>>
Slick! Where were these back when I needed 'em?! Nice work-
Mark
do not archive
Start the year off right. Easy ways to stay in shape in the new year.
[quote][b]
| | - The Matronics AeroElectric-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?AeroElectric-List |
|
_________________
From The PossumWorks... |
|
| Back to top |
|
 |
Peter Laurence
Joined: 10 Jan 2006
Posts: 50
|
| Posted: Fri Jan 11, 2008 6:06 am Post subject: Question about Annunciating Lights |
|
|
For all of you that don't know, Mark makes a great static port!
Peter Laurence
[quote]
Here's another take on rollin' yer own:
http://websites.expercraft.com/n51pw/index.php?q=log_entry&log_id=5126
Click on fotos for bigger view and Next Entry>> for more info (several pages) including wiring diagram, part #s etc...
From The PossumWorks in TN
Mark Phillips
Start the year off right. Easy ways to stay in shape in the new year.
| Quote: |
href="http://www.matronics.com/Navigator?AeroElectric-List">http://www.matronics.com/Navigator?AeroElectric-List
href="http://forums.matronics.com">http://forums.matronics.com
href="http://www.matronics.com/contribution">http://www.matronics.com/c
|
[b]
| | - The Matronics AeroElectric-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?AeroElectric-List |
|
|
|
| Back to top |
|
|
Allen Fulmer
Joined: 10 Jan 2006
Posts: 79
Location: Alexander City, AL
|
| Posted: Fri Jan 11, 2008 10:50 am Post subject: Question about Annunciating Lights |
|
|
I bought those ports but then read so much about Van's being the only ports that were accurate that I put them on the shelf and installed Van's "rivet ports".
Has anyone flown with the Safe-Air ports and found them to be as accurate as Van's?
TIA
Allen Fulmer
RV7 wiring and avionics
[quote] --
| | - The Matronics AeroElectric-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?AeroElectric-List |
|
_________________
RV7 QB Fuselage
Eggenfellner H6 on orde
N808AF reserved
Alexander City, AL |
|
| Back to top |
|
|
sshook(at)cox.net
Guest
|
| Posted: Fri Jan 11, 2008 11:51 am Post subject: Question about Annunciating Lights |
|
|
Mark,
That’s actually better than what I was looking for!
I could buy those LED rectangles and mount them behind the reverse engraved acrylic front and have exactly what I am looking for. Any idea on whether the measurements on the rectangles are in mm?
Thank you for posting that information. You have solved my problem! Look at that - its only January and already my list contribution has paid off.
Scott R. Shook
RV-7A (Building)
N696JS (Reserved)
From: owner-aeroelectric-list-server(at)matronics.com [mailto:owner-aeroelectric-list-server(at)matronics.com] On Behalf Of Fiveonepw(at)aol.com
Sent: Wednesday, 09 January, 2008 22:14
To: aeroelectric-list(at)matronics.com
Subject: Re: AeroElectric-List: Question about Annunciating Lights
Here's another take on rollin' yer own:
http://websites.expercraft.com/n51pw/index.php?q=log_entry&log_id=5126
Click on fotos for bigger view and Next Entry>> for more info (several pages) including wiring diagram, part #s etc...
From The PossumWorks in TN
Mark Phillips
Start the year off right. Easy ways to stay in shape in the new year.
| Quote: | | http://www.matronics.com/Navigator?AeroElectric-List |
0123456789
[quote][b]
| | - The Matronics AeroElectric-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?AeroElectric-List |
|
|
|
| Back to top |
|
|
zk-vii(at)rvproject.gen.n
Guest
|
| Posted: Fri Jan 11, 2008 12:41 pm Post subject: Question about Annunciating Lights |
|
|
Hi Scott,
Finding the LED bars was a bit of a struggle..... some pointers that might.... They are generically known as "LED Light Bars".
Some specific model numbers / sources:
Stanley MU02-2101 , DigiKey 404-1145-ND - I think that is what Mark used.
Kingston 404-1145-ND, Can be sourced from RS Components
Agilent HLCP-H100, not sure - but probably mouser
The other probably I had was I could get red of one type, yellow of a different type and green of a third type from a different vendor!
I ended up paying a little more, but got all Kingston modules through RS Components and are about 9mm x 19mm visible and sit in a 2x8 way DIL socket.
Regards,
Carl
--
Carl Morgan - ZK-VII - RV 7A
http://www.rvproject.gen.nz/
[quote] --
| | - The Matronics AeroElectric-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?AeroElectric-List |
|
|
|
| Back to top |
|
|
gyoung
Joined: 09 Jan 2006
Posts: 211
Location: Republic of Texas
|
| Posted: Fri Jan 11, 2008 1:13 pm Post subject: Question about Annunciating Lights |
|
|
I used 14x16mm light bars for mine. Got red, green and yellow from Digikey at ~$1.60 a piece. Link to red bar: http://search.digikey.com/scripts/DkSearch/dksus.dll?Detail?name=404-1152-ND
Regards,
Greg Young
[quote] From: owner-aeroelectric-list-server(at)matronics.com [mailto:owner-aeroelectric-list-server(at)matronics.com] On Behalf Of Carl Morgan
Sent: Friday, January 11, 2008 2:40 PM
To: aeroelectric-list(at)matronics.com
Subject: RE: AeroElectric-List: Question about Annunciating Lights
Hi Scott,
Finding the LED bars was a bit of a struggle..... some pointers that might.... They are generically known as "LED Light Bars".
Some specific model numbers / sources:
Stanley MU02-2101 , DigiKey 404-1145-ND - I think that is what Mark used.
Kingston 404-1145-ND, Can be sourced from RS Components
Agilent HLCP-H100, not sure - but probably mouser
The other probably I had was I could get red of one type, yellow of a different type and green of a third type from a different vendor!
I ended up paying a little more, but got all Kingston modules through RS Components and are about 9mm x 19mm visible and sit in a 2x8 way DIL socket.
Regards,
Carl
--
Carl Morgan - ZK-VII - RV 7A
http://www.rvproject.gen.nz/
[quote] --
| | - The Matronics AeroElectric-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?AeroElectric-List |
|
|
|
| Back to top |
|
|
Mark Phillips in TN
Joined: 10 Jan 2006
Posts: 431
Location: Columbia, TN
|
|
| Back to top |
|
|
Mark Phillips in TN
Joined: 10 Jan 2006
Posts: 431
Location: Columbia, TN
|
| Posted: Fri Jan 11, 2008 8:29 pm Post subject: Question about Annunciating Lights |
|
|
In a message dated 01/11/2008 1:53:32 PM Central Standard Time, sshook(at)cox.net writes:
| Quote: | | Any idea on whether the measurements on the rectangles are in mm? |
Here's the Digikey page with the LED modules- is gives dimensions in mm-
http://digi-key.dirxion.com/Main.asp
N-joy!
Mark
Start the year off right. Easy ways to stay in shape in the new year.
[quote][b]
| | - The Matronics AeroElectric-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?AeroElectric-List |
|
_________________
From The PossumWorks... |
|
| Back to top |
|
|
longg(at)pjm.com
Guest
|
|
| Back to top |
|
|
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum
|
Powered by phpBB © 2001, 2005 phpBB Group
|
Get Email Distribution Too!
FAQ
Search
Memberlist
Usergroups
Register
Profile
Log in to check your private messages
Log in
