Matronics Email Lists Forum Index Matronics Email Lists
Web Forum Interface to the Matronics Email Lists
 
 Get Email Distribution Too!Get Email Distribution Too!    FAQFAQ   SearchSearch   MemberlistMemberlist   UsergroupsUsergroups   RegisterRegister 
 ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 

damage :-(

 
Post new topic   Reply to topic    Matronics Email Lists Forum Index -> Europa-List
View previous topic :: View next topic  
Author Message
josok-e(at)ukolo.fi
Guest
PostPosted: Fri Feb 08, 2008 7:18 am    Post subject: damage :-( Reply with quote
After engine testing on the trailer, after the winter stop, i reversed the plane into the garage. Forgot that the port door was still open, so that's broken now. Worse of all, nobody else then me to blame.
Now, the question: Does somebody on this continent (Europe) have enough of the factory supplied Sikkens top coat left to do a door? Primer, hardener and thinner i still have.

Regards,

Jos Okhuijsen
Visit - www.EuropaOwners.org

- The Matronics Europa-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Europa-List
Back to top
fairnico(at)seznam.cz
Guest
PostPosted: Fri Feb 08, 2008 7:46 am    Post subject: damage :-( Reply with quote
Can you send a picture, please ?

Nico. P. Pastramagiu
Fairnico - Friendly Business
mob. +420 608 151 252
Tel/fax. +420 274 866 485
-----Původní zpráva-----
Od: owner-europa-list-server(at)matronics.com [mailto:owner-europa-list-server(at)matronics.com] za
uživatele josok
Odesláno: 8. února 2008 16:11
Komu: europa-list(at)matronics.com
Předmět: damage Sad



After engine testing on the trailer, after the winter stop, i reversed the plane into the garage.
Forgot that the port door was still open, so that's broken now. Worse of all, nobody else then me to
blame.
Now, the question: Does somebody on this continent (Europe) have enough of the factory supplied
Sikkens top coat left to do a door? Primer, hardener and thinner i still have.

Regards,

Jos Okhuijsen
Visit - www.EuropaOwners.org

__________ NOD32 2859 (20080208) Information __________

- The Matronics Europa-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Europa-List
Back to top
fklein(at)orcasonline.com
Guest
PostPosted: Fri Feb 08, 2008 11:22 am    Post subject: damage :-( Reply with quote
Quote:
Does somebody on this continent (Europe) have enough of the factory
supplied Sikkens top coat left to do a door?

Jos,

Very sorry to hear of your mishap. I wasn't aware that the factory
supplied Sikkens top coat to builders/customers. Can you elaborate and
describe how you intend to use it, assuming you can locate some?

Fred
--
This message has been scanned for viruses and
dangerous content by MailScanner, and is
believed to be clean.

- The Matronics Europa-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Europa-List
Back to top
josok-e(at)ukolo.fi
Guest
PostPosted: Fri Feb 08, 2008 2:17 pm    Post subject: damage :-( Reply with quote
Hi Fred,

Yes, this top coat is part of the set of primer, hardener and thinner that the factory used to supply. I have been informed in the mean time, that there has been a change of supplier. Sikkens is also wrong, another mistake. Good that i am not flying today! It is not my day.

It is Akzo Nobel top-coat that i was after. Nev has some, and will be helping me out once more. He might even have some port door brown plexi. The factory only has gray in stock or blank to order.

How i will use it? According to the instructions i hope Smile The idea is to repair the frame, sand away the remaining redux, make to new plexi to fit and then: Filling and sanding again. Then i have learned how to use a mini spray gun, ideal for small surfaces. Back in the air real soon now Smile

Regards,

Jos Okhuijsen
Visit - www.EuropaOwners.org

- The Matronics Europa-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Europa-List
Back to top
pilot.whittingham(at)goog
Guest
PostPosted: Fri Feb 08, 2008 2:25 pm    Post subject: damage :-( Reply with quote
Jos, if you have no joy my company specialize in colour matching, so if you can send me a piece of your aircraft in the colour you need we can have it back to you by return.
No charge.

Paul
Visit - www.EuropaOwners.org

- The Matronics Europa-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Europa-List
Back to top
Display posts from previous:   
Post new topic   Reply to topic    Matronics Email Lists Forum Index -> Europa-List All times are GMT - 8 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum


Powered by phpBB © 2001, 2005 phpBB Group