Matronics Email Lists :: View topic - Control Vision Exp2Buss Service

Matronics Email Lists
Web Forum Interface to the Matronics Email Lists

Get Email Distribution Too! FAQ Search Memberlist Usergroups Register

Profile Log in to check your private messages Log in

Control Vision Exp2Buss Service

Matronics Email Lists Forum Index -> RV-List

View previous topic :: View next topic

Author Message

robertrv607(at)yahoo.com
Guest

Posted: Mon Feb 18, 2008 9:52 am Post subject: Control Vision Exp2Buss Service

Hello:

  

 Hope some one can help,,, only those with the Exp2Buss,  I haves tried to contact some one at

 Control Vission  sent E mails, nothing... terrible service...

  

 I  recently found, that after flying  a few minutes, I get a complete electrical failure... ;no good..

  

 As I said I have the exp2 buss unit from "Control Vision",   I had   sent the unit before to be checked, which

 cost  me money.   they return it saying is was OK>..

  

 Once I reset the master switch, everything goes to normal...

  

 Everything has been installed as per Manual,.....

  

 Any one has any idea, what to check or why? how is your Installation works for you....

  

 Thanks

  

 bert

  

  

       Be a better friend, newshound, and  [quote][b]

- The Matronics RV-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?RV-List

pbesing(at)yahoo.com
Guest

Posted: Mon Feb 18, 2008 12:03 pm Post subject: Control Vision Exp2Buss Service

To me, I never understood the benefit of a solid state unit like that.  My opinion is that if an electrical system works great with good old fashioned breakers and buss bars, go with it.  I would never trust an entire electrical system to one unit.  I say if you have the means to put in a buss bar and breakers or even better, switch/breaker combos, I so go for it and ditch the expbus.



Paul Besing

---

- The Matronics RV-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?RV-List

deanpichon(at)msn.com
Guest

Posted: Mon Feb 18, 2008 12:34 pm Post subject: Control Vision Exp2Buss Service

I can't speak to Control Vision customer service, but I have been very satisfied with the Exp2Bus.  I have 400hrs on mine with no problems to date.  Does complete electrical failure meet no power to the Exp or no power from the Exp.  The former suggests a problem other than the Exp, while the latter suggest either the primary relay is bad, or every resettable fuse is tripping which seems rather unlikely.

 Good luck,

  	  Quote: 	
		    Date: Mon, 18 Feb 2008 09:49:46 -0800

From: robertrv607(at)yahoo.com

Subject: Control Vision Exp2Buss Service

To: rv-list(at)matronics.com

   .ExternalClass DIV {;}     Hello:

 Hope some one can help,,, only those with the Exp2Buss,  I haves tried to contact some one at

 Control Vission  sent E mails, nothing... terrible service...

 I  recently found, that after flying  a few minutes, I get a complete electrical failure... ;no good..

 As I said I have the exp2 buss unit from "Control Vision",   I had   sent the unit before to be checked, which

 cost  me money.   they return it saying is was OK>..

 Once I reset the master switch, everything goes to normal...

 Everything has been installed as per Manual,.....

 Any one has any idea, what to check or why? how is your Installation works for you....

 Thanks

 bert

  Be a better friend, newshound, and  	  Quote: 	

t=_blank>http://www.matronics.com/Navigator?RV-List

p://forums.matronics.com

blank>http://www.matronics.com/contribution

Connect and share in new ways with Windows Live. Get it now!  [quote][b]

- The Matronics RV-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?RV-List

Dale Ensing

Joined: 11 Jan 2006
Posts: 571
Location: Aero Plantation Weddington NC

Posted: Mon Feb 18, 2008 1:35 pm Post subject: Control Vision Exp2Buss Service

Bert,

 It sounds like the master relay on your EXP buss  may be opening after a few minutes. This could be because of a poor connection  in the energizing wiring circuit to the circuit board mounted relay since Control Vision said the unit checked out  OK. Suggest you check out all the crimp connectors in the circuit and the  master switch.

  

 I have been flying for three years with the EXP bus  in my 6A with no problems but I have an external master relay and did not use  the EXP circuit board mounted relay.

  

 Paul,

 I agree with you...Knowing what I know now about  designing and installing 'a good old fashioned buss bar and breakers' I would  not use the EXP but it has served me well so far. Doing it again I would  probably go with auto type blade fuses.

 Dale Ensing

 [quote]   ---

- The Matronics RV-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?RV-List

_________________
Dale Ensing
RV-6A
Aero Plantation
Weddington NC

Display posts from previous:

	Matronics Email Lists Forum Index -> RV-List	All times are GMT - 8 Hours
Page 1 of 1

Jump to:

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum