 |
Matronics Email Lists
Web Forum Interface to the Matronics Email Lists
|
| View previous topic :: View next topic |
| Author |
Message |
rnewman(at)tcwtech.com
Guest
|
 Posted: Sun Mar 16, 2008 5:42 am Post subject: wing root fairing support, Bad Part??? |
 |
|
I'm working on Page 44-2, the wing root fairing supports F-1099EFG-L and F-1099EFG-R, I believe I have a bad part and could use some help identifying the good part. The part (F-1099EFG) has an L shaped angle with one flange being about .750" wide and the other .640" wide. The parts I received are NOT mirror images of each other. One part has the holes punched in the .750" flange, the other in the .640" flange.
This effects the height of the support of the wing root fairing and pretty clearly one of these is wrong. Can anyone tell me which flange the holes should be punched in so I can tell Van's which one they need to send me and in the mean time fit up the good part I do have. My guess currently is the pre punched holes are on the .750 flange that mates up to the fuselage per steps 2 and 3 on page 44-2.
Thanks for the help,
Bob Newman
TCW Technologies
www.tcwtech.com
[quote][b]
| | - The Matronics RV10-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?RV10-List |
|
|
|
| Back to top |
|
 |
dlm46007(at)cox.net
Guest
|
| Posted: Sun Mar 16, 2008 11:02 am Post subject: wing root fairing support, Bad Part??? |
|
|
you do have a bad part; I had one also the left one bad , right was OK. and Van's saw and shipped a new part the part was bent wrong and holes do not line up even when properly shaped. Also heights do not match top fairing.
From: owner-rv10-list-server(at)matronics.com [mailto:owner-rv10-list-server(at)matronics.com] On Behalf Of Bob-tcw
Sent: Sunday, March 16, 2008 6:39 AM
To: rv10-list(at)matronics.com
Subject: wing root fairing support, Bad Part???
I'm working on Page 44-2, the wing root fairing supports F-1099EFG-L and F-1099EFG-R, I believe I have a bad part and could use some help identifying the good part. The part (F-1099EFG) has an L shaped angle with one flange being about .750" wide and the other .640" wide. The parts I received are NOT mirror images of each other. One part has the holes punched in the .750" flange, the other in the .640" flange.
This effects the height of the support of the wing root fairing and pretty clearly one of these is wrong. Can anyone tell me which flange the holes should be punched in so I can tell Van's which one they need to send me and in the mean time fit up the good part I do have. My guess currently is the pre punched holes are on the .750 flange that mates up to the fuselage per steps 2 and 3 on page 44-2.
Thanks for the help,
Bob Newman
TCW Technologies
www.tcwtech.com
[quote]
href="http://www.matronics.com/Navigator?RV10-List">http://www.matronics.com/Navigator?RV10-List
href="http://forums.matronics.com">http://forums.matronics.com
href="http://www.matronics.com/contribution">http://www.matronics.com/c
[b]
| | - The Matronics RV10-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?RV10-List |
|
|
|
| Back to top |
|
|
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum
|
Powered by phpBB © 2001, 2005 phpBB Group
|
Get Email Distribution Too!
FAQ
Search
Memberlist
Usergroups
Register
Profile
Log in to check your private messages
Log in
