 |
Matronics Email Lists Web Forum Interface to the Matronics Email Lists
|
View previous topic :: View next topic |
Author |
Message |
richch801(at)yahoo.com Guest
|
Posted: Sat May 10, 2008 12:47 pm Post subject: CH801 First Flight ! |
|
|
Well, I finally got the bird off the ground.
I made 2 flights today. The 1st was 1/2 hr long. I had high cylinder temps & a very slight oil leak. I found out where the leak was from, Cyl #1 pushrod tube seals. They weren't seated in far enough. I tapped them in & the leak is fixed, confirmed by my 2nd flight. Also made the bottom cowl exhaust opening a little larger but the 2nd flight still showed high cylinder temps. Probably need to make a front centerline baffle as others have. Noticed that the engine baffles that curve underneath the cylinders, connected by the springs, are too long & don't allow enough air to pass thru the bottom of the cylinders. Anyone have any other ideas ?
VERY short takeoff roll. Don't know the distance yet. Will get that later when all the more important problems have been solved.
Rich
South Carolina
Be a better friend, newshound, and [quote][b]
| - The Matronics Zenith-List Email Forum - | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?Zenith-List |
|
|
|
Back to top |
|
 |
n801bh(at)netzero.com Guest
|
Posted: Sat May 10, 2008 2:36 pm Post subject: CH801 First Flight ! |
|
|
Too Kool. A big congrats to you.... Glad you have got the bird in the air. I am just guessing here since my 801 is water cooled but the 801 flies at such a slow airspeed I bet the reduced airflow diminishes your engine cooling as bad as it does mine. Ya got to love the very short takeoff rolls as compared to all the other planes you have flown. A quick caution,, don't park the plane into a strong wind with very little fuel and then get out. It will try to lift off.... Congrats again Rich..
do not archive
Ben Haas
N801BH
www.haaspowerair.com
-- Rich <richch801(at)yahoo.com> wrote:
Well, I finally got the bird off the ground.
I made 2 flights today. The 1st was 1/2 hr long. I had high cylinder temps & a very slight oil leak. I found out where the leak was from, Cyl #1 pushrod tube seals. They weren't seated in far enough. I tapped them in & the leak is fixed, confirmed by my 2nd flight. Also made the bottom cowl exhaust opening a little larger but the 2nd flight still showed high cylinder temps. Probably need to make a front centerline baffle as others have. Noticed that the engine baffles that curve underneath the cylinders, connected by the springs, are too long & don't allow enough air to pass thru the bottom of the cylinders. Anyone have any other ideas ?
VERY short takeoff roll. Don't know the distance yet. Will get that later when all the more important problems have been solved.
Rich
South Carolina
Be a better friend, newshound, and Quote: |
====================================
">http://www.matronics.com/Navigator?Zenith-List
====================================
tronics.com
====================================
www.matronics.com/contribution
====================================
|
_____________________________________________________________
Amazing cruises. Click here to find great deals.
[quote][b]
| - The Matronics Zenith-List Email Forum - | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?Zenith-List |
|
|
|
Back to top |
|
 |
Iberplanes
Joined: 10 Dec 2007 Posts: 174 Location: Igualada - Barcelona - Spain
|
Posted: Sun May 11, 2008 2:04 am Post subject: CH801 First Flight ! |
|
|
Congratulations on your achievement.
My 601 is getting bigger day after day, and I think it would be finished next year !!
Take care
Alberto Martin
Iberplanes IGL
http://www.iberplanes.es
Igualada - Barcelona - Espaņa
[quote] ---
| - The Matronics Zenith-List Email Forum - | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?Zenith-List |
|
_________________ Alberto Martin
601 XL - Jabiru 3300
http://www.iberplanes.es
Igualada - Barcelona - Spain |
|
Back to top |
|
 |
|
|
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum You cannot attach files in this forum You can download files in this forum
|
Powered by phpBB © 2001, 2005 phpBB Group
|