 |
Matronics Email Lists
Web Forum Interface to the Matronics Email Lists
|
| View previous topic :: View next topic |
| Author |
Message |
dan(at)familybrown.org
Guest
|
 Posted: Sun Jul 06, 2008 1:47 pm Post subject: FOR SALE: Isham RV Tool Kit with upgrades |
 |
|
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1
For a variety of reasons, mostly relating to my being called to active
duty with the Army, I won't be able to complete my planned RV-7A.
Consequently, I'll need to sell my tools. This is the complete Isham
kit pictured at:
http://www.store-planetools.com/index.asp?PageAction=VIEWPROD&ProdID=9
This kit includes a pneumatic rivet squeezer and the popular DRDT-2
dimpling tool.
In addition, the following extras are included:
Screw-adjustable Rivet Squeezer Ram (a $70 value)
Avery Longeron Yoke (a $150 value)
Avery Thin-nose (no-hole) Yoke (a $140 value)
Avery back-rivet plate (a $50 value)
Avery flush swivel rivet set (a $40 value)
A couple of additional countersink cutters
Additional side-grip clecos (about 10 extra of each, IIRC)
That's $450 in upgrades, in addition to the Isham set. All tools are in
excellent condition. The air drill is NOT, repeat NOT included;
everything else is.
This would cost nearly $3000 for these tools ordered new. I'll take
$2500 OBO, plus shipping. If you're local to Fayetteville, NC, you can
pick up. Contact me by e-mail at dan(at)familybrown.org if interested.
Thanks for your interest!
The following tools are included:
DRDT-2 Dimpler* (email for delivery date on DRDT-2)
Pneumatic Rivet Squeezer (U.S.A.)*
3” C-Yoke Installed on Squeezer (U.S.A.)*
Adjustable Set Holder for Pneumatic Squeezer (U.S.A.)*
3X Rivet Gun with excellent teasing trigger*
EZ change spring for straight rivet sets*
EZ Change Spring for flush sets (Snap-On Ind U.S.A.)*
Swivel and Air Flow Restrictor with fine precision adjustment*
1” Diameter Flush Rivet Set (Snap-On U.S.A.)*
3/32” Cupped Rivet Set 3.5” (Snap-On U.S.A.)*
1/8” Cupped Rivet Set 3.5” (Snap-On U.S.A.)*
3/16” Cupped Rivet Set 3.5” (Snap-On U.S.A.)*
1/8” Double Offset Rivet Set (Snap-On U.S.A.)*
Back Rivet Set* (Special Small 1/2" Diameter for RV's)
Mini-Bucking Bar, 1 lb. (Snap-On U.S.A.)*
Bulkhead Bucking Bar (Snap-On U.S.A.)*
Footed Bucking Bar (Snap-On U.S.A.)*
Microstop Countersink Unit, needle-bearing, non-chattering (U.S.A.)*
#40 Countersink Bit, 3/32” (Snap-On U.S.A.)*
#30 Countersink Bit, for 1/8” & #6 Screw (Snap-On U.S.A.)*
#8 Countersink Bit, #8 Screw (Snap-On U.S.A.)*
#10 Countersink Bit, #10 Screw (Snap-On U.S.A.)*
Left Cut Snips, easy to use offset type (Klein Tools U.S.A.)*
Right Cut Snips, easy to use offset type (Klein Tools U.S.A.)*
Straight Cut Snips, easy to use offset type (Klein Tools U.S.A.)*
#40 Aviation Cobalt Drill Bits for 3/32” rivets, 8 each
#30 Aviation Cobalt Drill Bits for 1/8” rivets, 6 each
#27 Aviation Cobalt Drill Bit
#21 Aviation Cobalt Drill Bit
#19 Aviation Cobalt Drill Bit
#12 Aviation Cobalt Drill Bit
1/4" Aviation Cobalt Drill Bit
12” Aviation Extra Long #40 Drill Bit
12” Aviation Extra Long #30 Drill Bit
Deburr Tool, Speed Handle Type for small & large holes (U.S.A.)*
Cleco Pliers*
4 Cleco Clamps, 1/2" (Calif Assoc Prod or Zephyr U.S.A.)*
4 Cleco Clamps, 1” (Calif Assoc Prod or Zephyr U.S.A.)*
Pop Rivet Tool, Professional Heavy-Duty unit with Swivel Head*
3/32" Universal Cupped Squeezer Set (Snap-On U.S.A.)*
1/8” Universal Cupped Squeezer Set (Snap-On U.S.A.)*
5/32" Universal Cupped Squeezer Set (Snap-On U.S.A.)*
3/16” Universal Cupped Squeezer Set (Snap-On U.S.A.)*
Flat Squeezer Set 1/8” (Snap-On U.S.A.)*
Flat Squeezer Set 1/4" (Snap-On U.S.A.)*
Flat Squeezer Set 3/8” (Snap-On U.S.A.)*
Flat Squeezer Set 1/2" (Snap-On U.S.A.)*
3/32” Rivet Dimple Die (Springback U.S.A.)*
1/8” Rivet Dimple Die (Springback U.S.A.)*
5/32" Dimple Die*
3/16" - #10 Screw Dimple Die*
#8 Screw Dimple Die*
#6 Screw Dimple Die*
Squeezer Set Organizer*
Squeezer Set Adjustment Washers *
Stainless Steel Rule, 12”*
Unibit 1/4" - 3/4" by 1/16ths, (Klein U.S.A.)*
3 Permanent Markers, Sharpie
1/2 x 1 Reducers for 3M Wheel*
325 Cleco Fasteners, 3/32” (Calif Assoc Prod or Zephyr U.S.A.)*
175 Cleco Fasteners, 1/8” (Calif Assoc Prod or Zephyr U.S.A.)*
10 Cleco Fasteners, 5/32" (Calif Assoc Prod or Zephyr U.S.A.)*
10 Cleco Fasteners, 3/16” (Calif Assoc Prod or Zephyr U.S.A.)*
Edge Deburring Tool, Hex Swivel type*
Fluting Pliers, Smooth Flute Nylon Jaws*
Fluting Pliers, Deep “V” Nylon Jaws*
Rivet Cutter*
Air Tool Oil
Drill Stop Set of 4 with Allen Wrench*
Rivet Set DOTS, Easier than Rivet Tape
3/32” Pop Rivet Dimple Die, Springback (U.S.A.)*
1/8” Pop Rivet Dimple Die, Springback (U.S.A.)*
Hand Seamer (Klein Tools U.S.A.)*
3/32” Drive Pin Punch (Klein Tools U.S.A.)*
1/8” Drive Pin Punch (Klein Tools U.S.A.)*
Scotch Brite Hand Pads, 4 each
Rivet Length Gauge*
Rivet Shop Head Gauge, 4-piece*
- --
Dan Brown, KE6MKS, dan(at)familybrown.org
"Since all the world is but a story, it were well for thee to buy the
more enduring story rather than the story that is less enduring."
~ -- The Judgment of St. Colum Cille
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.2.1 (MingW32)
Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org
iD8DBQFIcTwsyQGUivXxtkERArQ5AKDXyHERioqiOx7Di9qmwK5lYRUxZwCgxTEO
1xKO82rbsPh08my6buAF1iY=
=GTub
-----END PGP SIGNATURE-----
| | - The Matronics RV-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?RV-List |
|
|
|
| Back to top |
|
 |
mkaratsonyi(at)hotmail.co
Guest
|
| Posted: Mon Jul 07, 2008 11:52 am Post subject: FOR SALE: Isham RV Tool Kit with upgrades |
|
|
do you still have tools for sale?
| Quote: | Date: Sun C 6 Jul 2008 17:42:04 -0400
From: dan(at)familybrown.org
To: rv-list(at)matronics.com
Subject: FOR SALE: Isham RV Tool Kit with upgrades
--> RV-List message posted by: Dan Brown <dan(at)familybrown.org>
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1
For a variety of reasons C mostly relating to my being called to active
duty with the Army C I won't be able to complete my planned RV-7A.
Consequently C I'll need to sell my tools. This is the complete Isham
kit pictured at:
http://www.store-planetools.com/index.asp?PageAction=VIEWPROD&ProdID=9
This kit includes a pneumatic rivet squeezer and the popular DRDT-2
dimpling tool.
In addition C the following extras are included:
Screw-adjustable Rivet Squeezer Ram (a $70 value)
Avery Longeron Yoke (a $150 value)
Avery Thin-nose (no-hole) Yoke (a $140 value)
Avery back-rivet plate (a $50 value)
Avery flush swivel rivet set (a $40 value)
A couple of additional countersink cutters
Additional side-grip clecos (about 10 extra of each C IIRC)
That's $450 in upgrades C in addition to the Isham set. All tools are in
excellent condition. The air drill is NOT C repeat NOT included;
everything else is.
This would cost nearly $3000 for these tools ordered new. I'll take
$2500 OBO C plus shipping. If you're local to Fayetteville C NC C you can
pick up. Contact me by e-mail at dan(at)familybrown.org if interested.
Thanks for your interest!
The following tools are included:
DRDT-2 Dimpler* (email for delivery date on DRDT-2)
Pneumatic Rivet Squeezer (U.S.A.)*
3 C-Yoke Installed on Squeezer (U.S.A.)*
Adjustable Set Holder for Pneumatic Squeezer (U.S.A.)*
3X Rivet Gun with excellent teasing trigger*
EZ change spring for straight rivet sets*
EZ Change Spring for flush sets (Snap-On Ind U.S.A.)*
Swivel and Air Flow Restrictor with fine precision adjustment*
1 Diameter Flush Rivet Set (Snap-On U.S.A.)*
3/32 Cupped Rivet Set 3.5 (Snap-On U.S.A.)*
1/8 Cupped Rivet Set 3.5 (Snap-On U.S.A.)*
3/16 Cupped Rivet Set 3.5 (Snap-On U.S.A.)*
1/8 Double Offset Rivet Set (Snap-On U.S.A.)*
Back Rivet Set* (Special Small 1/2" Diameter for RV's)
Mini-Bucking Bar C 1 lb. (Snap-On U.S.A.)*
Bulkhead Bucking Bar (Snap-On U.S.A.)*
Footed Bucking Bar (Snap-On U.S.A.)*
Microstop Countersink Unit C needle-bearing C non-chattering (U.S.A.)*
#40 Countersink Bit C 3/32 (Snap-On U.S.A.)*
#30 Countersink Bit C for 1/8 & #6 Screw (Snap-On U.S.A.)*
#8 Countersink Bit C #8 Screw (Snap-On U.S.A.)*
#10 Countersink Bit C #10 Screw (Snap-On U.S.A.)*
Left Cut Snips C easy to use offset type (Klein Tools U.S.A.)*
Right Cut Snips C easy to use offset type (Klein Tools U.S.A.)*
Straight Cut Snips C easy to use offset type (Klein Tools U.S.A.)*
#40 Aviation Cobalt Drill Bits for 3/32 rivets C 8 each
#30 Aviation Cobalt Drill Bits for 1/8 rivets C 6 each
#27 Aviation Cobalt Drill Bit
#21 Aviation Cobalt Drill Bit
#19 Aviation Cobalt Drill Bit
#12 Aviation Cobalt Drill Bit
1/4" Aviation Cobalt Drill Bit
12 Aviation Extra Long #40 Drill Bit
12 Aviation Extra Long #30 Drill Bit
Deburr Tool C Speed Handle Type for small & large holes (U.S.A.)*
Cleco Pliers*
4 Cleco Clamps C 1/2" (Calif Assoc Prod or Zephyr U.S.A.)*
4 Cleco Clamps C 1 (Calif Assoc Prod or Zephyr U.S.A.)*
Pop Rivet Tool C Professional Heavy-Duty unit with Swivel Head*
3/32" Universal Cupped Squeezer Set (Snap-On U.S.A.)*
1/8 Universal Cupped Squeezer Set (Snap-On U.S.A.)*
5/32" Universal Cupped Squeezer Set (Snap-On U.S.A.)*
3/16 Universal Cupped Squeezer Set (Snap-On U.S.A.)*
Flat Squeezer Set 1/8 (Snap-On U.S.A.)*
Flat Squeezer Set 1/4" (Snap-On U.S.A.)*
Flat Squeezer Set 3/8 (Snap-On U.S.A.)*
Flat Squeezer Set 1/2" (Snap-On U.S.A.)*
3/32 Rivet Dimple Die (Springback U.S.A.)*
1/8 Rivet Dimple Die (Springback U.S.A.)*
5/32" Dimple Die*
3/16" - #10 Screw Dimple Die*
#8 Screw Dimple Die*
#6 Screw Dimple Die*
Squeezer Set Organizer*
Squeezer Set Adjustment Washers *
Stainless Steel Rule C 12*
Unibit 1/4" - 3/4" by 1/16ths C (Klein U.S.A.)*
3 Permanent Markers C Sharpie
1/2 x 1 Reducers for 3M Wheel*
325 Cleco Fasteners C 3/32 (Calif Assoc Prod or Zephyr U.S.A.)*
175 Cleco Fasteners C 1/8 (Calif Assoc Prod or Zephyr U.S.A.)*
10 Cleco Fasteners C 5/32" (Calif Assoc Prod or Zephyr U.S.A.)*
10 Cleco Fasteners C 3/16 (Calif Assoc Prod or Zephyr U.S.A.)*
Edge Deburring Tool C Hex Swivel type*
Fluting Pliers C Smooth Flute Nylon Jaws*
Fluting Pliers C Deep V Nylon Jaws*
Rivet Cutter*
Air Tool Oil
Drill Stop Set of 4 with Allen Wrench*
Rivet Set DOTS C Easier than Rivet Tape
3/32 Pop Rivet Dimple Die C Springback (U.S.A.)*
1/8 Pop Rivet Dimple Die C Springback (U.S.A.)*
Hand Seamer (Klein Tools U.S.A.)*
3/32 Drive Pin Punch (Klein Tools U.S.A.)*
1/8 Drive Pin Punch (Klein Tools U.S.A.)*
Scotch Brite Hand Pads C 4 each
Rivet Length Gauge*
Rivet Shop Head Gauge C 4-piece*
- --
Dan Brown C KE6MKS C dan(at)familybrown.org
"Since all the world is but a story C it were well for thee to buy the
more enduring story rather than the story that is less enduring."
~ -- The Judgment of St. Colum Cille
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.2.1 (MingW32)
Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org
iD8DBQFIcTwsyQGUivXxtkERArQ5AKDXyHERioqiOx7Di9qmwK5lYRUxZwCgxTEO
1xKO82rbsPh08my6buAF1iY=
=GTub
-----END PGP SIG======================
>==================
|
[quote]
The im Talkaton. Can 30-days of conversation change the world? Find out now.
| | - The Matronics RV-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?RV-List |
|
|
|
| Back to top |
|
|
mkaratsonyi(at)hotmail.co
Guest
|
| Posted: Tue Jul 08, 2008 5:37 pm Post subject: FOR SALE: Isham RV Tool Kit with upgrades |
|
|
i am very interested C however i dont want to low ball you C i am also a veteran of the us army (airborne infantry) and i am on a budget C i really would like to purchase your kit however my budget is $1500 plus shipping if we can make a deal i would greatly appreciate it. Michael
[quote] Date: Sun C 6 Jul 2008 17:42:04 -0400
From: dan(at)familybrown.org
To: rv-list(at)matronics.com
Subject: FOR SALE: Isham RV Tool Kit with upgrades
--> RV-List message posted by: Dan Brown <dan(at)familybrown.org>
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1
For a variety of reasons C mostly relating to my being called to active
duty with the Army C I won't be able to complete my planned RV-7A.
Consequently C I'll need to sell my tools. This is the complete Isham
kit pictured at:
http://www.store-planetools.com/index.asp?PageAction=VIEWPROD&ProdID=9
This kit includes a pneumatic rivet squeezer and the popular DRDT-2
dimpling tool.
In addition C the following extras are included:
Screw-adjustable Rivet Squeezer Ram (a $70 value)
Avery Longeron Yoke (a $150 value)
Avery Thin-nose (no-hole) Yoke (a $140 value)
Avery back-rivet plate (a $50 value)
Avery flush swivel rivet set (a $40 value)
A couple of additional countersink cutters
Additional side-grip clecos (about 10 extra of each C IIRC)
That's $450 in upgrades C in addition to the Isham set. All tools are in
excellent condition. The air drill is NOT C repeat NOT included;
everything else is.
This would cost nearly $3000 for these tools ordered new. I'll take
$2500 OBO C plus shipping. If you're local to Fayetteville C NC C you can
pick up. Contact me by e-mail at dan(at)familybrown.org if interested.
Thanks for your interest!
The following tools are included:
DRDT-2 Dimpler* (email for delivery date on DRDT-2)
Pneumatic Rivet Squeezer (U.S.A.)*
3 C-Yoke Installed on Squeezer (U.S.A.)*
Adjustable Set Holder for Pneumatic Squeezer (U.S.A.)*
3X Rivet Gun with excellent teasing trigger*
EZ change spring for straight rivet sets*
EZ Change Spring for flush sets (Snap-On Ind U.S.A.)*
Swivel and Air Flow Restrictor with fine precision adjustment*
1 Diameter Flush Rivet Set (Snap-On U.S.A.)*
3/32 Cupped Rivet Set 3.5 (Snap-On U.S.A.)*
1/8 Cupped Rivet Set 3.5 (Snap-On U.S.A.)*
3/16 Cupped Rivet Set 3.5 (Snap-On U.S.A.)*
1/8 Double Offset Rivet Set (Snap-On U.S.A.)*
Back Rivet Set* (Special Small 1/2" Diameter for RV's)
Mini-Bucking Bar C 1 lb. (Snap-On U.S.A.)*
Bulkhead Bucking Bar (Snap-On U.S.A.)*
Footed Bucking Bar (Snap-On U.S.A.)*
Microstop Countersink Unit C needle-bearing C non-chattering (U.S.A.)*
#40 Countersink Bit C 3/32 (Snap-On U.S.A.)*
#30 Countersink Bit C for 1/8 & #6 Screw (Snap-On U.S.A.)*
#8 Countersink Bit C #8 Screw (Snap-On U.S.A.)*
#10 Countersink Bit C #10 Screw (Snap-On U.S.A.)*
Left Cut Snips C easy to use offset type (Klein Tools U.S.A.)*
Right Cut Snips C easy to use offset type (Klein Tools U.S.A.)*
Straight Cut Snips C easy to use offset type (Klein Tools U.S.A.)*
#40 Aviation Cobalt Drill Bits for 3/32 rivets C 8 each
#30 Aviation Cobalt Drill Bits for 1/8 rivets C 6 each
#27 Aviation Cobalt Drill Bit
#21 Aviation Cobalt Drill Bit
#19 Aviation Cobalt Drill Bit
#12 Aviation Cobalt Drill Bit
1/4" Aviation Cobalt Drill Bit
12 Aviation Extra Long #40 Drill Bit
12 Aviation Extra Long #30 Drill Bit
Deburr Tool C Speed Handle Type for small & large holes (U.S.A.)*
Cleco Pliers*
4 Cleco Clamps C 1/2" (Calif Assoc Prod or Zephyr U.S.A.)*
4 Cleco Clamps C 1 (Calif Assoc Prod or Zephyr U.S.A.)*
Pop Rivet Tool C Professional Heavy-Duty unit with Swivel Head*
3/32" Universal Cupped Squeezer Set (Snap-On U.S.A.)*
1/8 Universal Cupped Squeezer Set (Snap-On U.S.A.)*
5/32" Universal Cupped Squeezer Set (Snap-On U.S.A.)*
3/16 Universal Cupped Squeezer Set (Snap-On U.S.A.)*
Flat Squeezer Set 1/8 (Snap-On U.S.A.)*
Flat Squeezer Set 1/4" (Snap-On U.S.A.)*
Flat Squeezer Set 3/8 (Snap-On U.S.A.)*
Flat Squeezer Set 1/2" (Snap-On U.S.A.)*
3/32 Rivet Dimple Die (Springback U.S.A.)*
1/8 Rivet Dimple Die (Springback U.S.A.)*
5/32" Dimple Die*
3/16" - #10 Screw Dimple Die*
#8 Screw Dimple Die*
#6 Screw Dimple Die*
Squeezer Set Organizer*
Squeezer Set Adjustment Washers *
Stainless Steel Rule C 12*
Unibit 1/4" - 3/4" by 1/16ths C (Klein U.S.A.)*
3 Permanent Markers C Sharpie
1/2 x 1 Reducers for 3M Wheel*
325 Cleco Fasteners C 3/32 (Calif Assoc Prod or Zephyr U.S.A.)*
175 Cleco Fasteners C 1/8 (Calif Assoc Prod or Zephyr U.S.A.)*
10 Cleco Fasteners C 5/32" (Calif Assoc Prod or Zephyr U.S.A.)*
10 Cleco Fasteners C 3/16 (Calif Assoc Prod or Zephyr U.S.A.)*
Edge Deburring Tool C Hex Swivel type*
Fluting Pliers C Smooth Flute Nylon Jaws*
Fluting Pliers C Deep V Nylon Jaws*
Rivet Cutter*
Air Tool Oil
Drill Stop Set of 4 with Allen Wrench*
Rivet Set DOTS C Easier than Rivet Tape
3/32 Pop Rivet Dimple Die C Springback (U.S.A.)*
1/8 Pop Rivet Dimple Die C Springback (U.S.A.)*
Hand Seamer (Klein Tools U.S.A.)*
3/32 Drive Pin Punch (Klein Tools U.S.A.)*
1/8 Drive Pin Punch (Klein Tools U.S.A.)*
Scotch Brite Hand Pads C 4 each
Rivet Length Gauge*
Rivet Shop Head Gauge C 4-piece*
- --
Dan Brown C KE6MKS C dan(at)familybrown.org
"Since all the world is but a story C it were well for thee to buy the
more enduring story rather than the story that is less enduring."
~ -- The Judgment of St. Colum Cille
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.2.1 (MingW32)
Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org
iD8DBQFIcTwsyQGUivXxtkERArQ5AKDXyHERioqiOx7Di9qmwK5lYRUxZwCgxTEO
1xKO82rbsPh08my6buAF1iY=
=GT===
Use video conversation to talk face-to-face with Windows Live Messenger. Get started.
| | - The Matronics RV-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?RV-List |
|
|
|
| Back to top |
|
|
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum
|
Powered by phpBB © 2001, 2005 phpBB Group
|
Get Email Distribution Too!
FAQ
Search
Memberlist
Usergroups
Register
Profile
Log in to check your private messages
Log in
