Matronics Email Lists :: View topic

Matronics Email Lists
Web Forum Interface to the Matronics Email Lists

Get Email Distribution Too! FAQ Search Memberlist Usergroups Register

Profile Log in to check your private messages Log in

AOA, RiteAngle

Matronics Email Lists Forum Index -> Europa-List

View previous topic :: View next topic

Author Message

EMAproducts(at)aol.com
Guest

Posted: Thu Jul 31, 2008 7:57 am Post subject: AOA, RiteAngle

 	  Quote: 	
		  Elbie,

    You have me!  I admit I was unaware of    your product and let me

apologise. If I ask you here, perhaps it won't    appear to be advertising since

you were questioned. Ferg  Kyle 	
 No offense taken Ferg! 

  I have never produced an AOA with a needle & Dial, though did  some experimenting with them for many years, from the late 60's to  '91 prior to going to LEDs  I attended Sun N Fun , Oshkosh,  Arlington having a booth and giving forums from about 96 to '05 and finally  decided the shows were so expensive that unless I really raised the price of my  product it wasn't worth the cost & effort.  Not that I didnt' like  going to the shows, but the reality crept in that it wasn't helping the bottom  line any. I have advertised in the Sport Aviation and Experimenter for well over  10 years, could be that isn't very productive either  

 Our "Poor Mans HUD" is basically just that we use Ultra bright LED's, bury  under the glare shield, and angle so the LED's are reflected on the windscreen,  works just as good as the multi thousand dollar system.  Think of it,  anything you lay on the panel reflects ~~ right where you want to look!   All you see in the windscreen is a little series of colored dots, all 3 green  you are on speed, amber slow, red stall warning.

 Will answer other questions off line, don't want to interfere with the main  purpose of these lists, helping the builder This can be refined with a short  tube to make the light more intense and sharply defined.  

 I'm still striving to give the best safety product at the lowest  price.

 Elbie

  www.riteangle.com

  

  

  	  Quote: 	
		  

 	


Get fantasy football with free live scoring. Sign up for FanHouse Fantasy Football today.

  [quote][b]

- The Matronics Europa-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Europa-List

grahamsingleton(at)btinte
Guest

Posted: Thu Jul 31, 2008 10:50 am Post subject: AOA, RiteAngle

Elbie

just a though, sure, shows are expensive but it is cheaper for you that 

all your customers visit you at a show than you go and visit them 

I'm impressed with  your description of the "poor man's HUD" btw

Graham



EMAproducts(at)aol.com wrote:

 	  Quote: 	
		   No offense taken Ferg! 

  I have never produced an AOA with a needle & Dial, though did some 

 experimenting with them for many years, from the late 60's to 

 '91 prior to going to LEDs  I attended Sun N Fun , Oshkosh, Arlington 

 having a booth and giving forums from about 96 to '05 and finally 

 decided the shows were so expensive that unless I really raised the 

 price of my product it wasn't worth the cost & effort.  Not that I 

 didnt' like going to the shows, but the reality crept in that it 

 wasn't helping the bottom line any. I have advertised in the Sport 

 Aviation and Experimenter for well over 10 years, could be that isn't 

 very productive either 

 Our "Poor Mans HUD" is basically just that we use Ultra bright LED's, 

 bury under the glare shield, and angle so the LED's are reflected on 

 the windscreen, works just as good as the multi thousand dollar 

 system.  Think of it, anything you lay on the panel reflects ~~ right 

 where you want to look!  All you see in the windscreen is a little 

 series of colored dots, all 3 green you are on speed, amber slow, red 

 stall warning.

 Will answer other questions off line, don't want to interfere with the 

 main purpose of these lists, helping the builder This can be refined 

 with a short tube to make the light more intense and sharply defined. 

 I'm still striving to give the best safety product at the lowest price.

 Elbie

  www.riteangle.com <http://www.riteangle.com>

- The Matronics Europa-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Europa-List

craigb(at)onthenet.com.au
Guest

Posted: Fri Aug 01, 2008 4:54 am Post subject: AOA, RiteAngle

If you are interested in superbright LED for this or Nav lights/strobes

might i suggest "light of victory" on ebay they have a good range

of different angle superbright LED. I have made my strobes from a 3x3

array of leds and it measures at over 1000cd per pulse across a 180 degree

spread

and about 1500cd in the horizontal plain



--

- The Matronics Europa-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Europa-List

Display posts from previous:

	Matronics Email Lists Forum Index -> Europa-List	All times are GMT - 8 Hours
Page 1 of 1

Jump to:

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum