Matronics Email Lists :: View topic

Matronics Email Lists
Web Forum Interface to the Matronics Email Lists

Get Email Distribution Too! FAQ Search Memberlist Usergroups Register

Profile Log in to check your private messages Log in

Countersink

Matronics Email Lists Forum Index -> RV10-List

View previous topic :: View next topic

Author Message

drfred(at)suddenlinkmail.
Guest

Posted: Mon Aug 11, 2008 10:17 am Post subject: Countersink

John;



Received and countersunk the 5/16 holes for the seat belts.   Thanks.



Will send on to Don McDonald in California. 



Fred Williams

orchidman

Joined: 10 Jul 2006
Posts: 277
Location: Oklahoma City - KRCE

Posted: Thu Aug 14, 2008 3:19 pm Post subject: Re: Countersink

 	  drfred(at)suddenlinkmail. wrote: 	
		  John;



Received and countersunk the 5/16 holes for the seat belts.   Thanks.



Will send on to Don McDonald in California. 



Fred Williams 	


If possible, please add me to the end of the list.

_________________
Gary Blankenbiller
RV10 - # 40674
(N2GB Flying)

Phil White

Joined: 10 Jan 2006
Posts: 45
Location: Downers Grove, IL

Posted: Fri Aug 15, 2008 8:48 am Post subject: Countersink

 	  Quote: 	
		  

 Time: 8/14/08 04:24:28 PM PST US

 Subject: Re: Countersink

   

> Received and countersunk the 5/16 holes for the seat belts.   Thanks.

>

> Will send on to Don McDonald in California. 

>

> Fred Williams

>     



 If possible, please add me to the end of the list.

Please add me to the list also.
	




Phil White, 580 Millbrook Dr.  Downers Grove, IL  60516



#40220, tryin' to figure out the mounting of a Wankel engine

_________________
RV-10 #40220 in Downers Grove, IL
(airframe done exc. gear fairings)

bob.kaufmann(at)cox.net
Guest

Posted: Sat Aug 16, 2008 7:06 am Post subject: Countersink

I would like to be on the end of the list, 

Bob Kaufmann

7602 Grove Acre Court

Las Vegas, NV 89131



--

ricksked(at)embarqmail.co
Guest

Posted: Sat Aug 16, 2008 11:21 am Post subject: Countersink

Bob,



Just borrow mine when you need it.



Rick S.

40185

---

partner14

Joined: 12 Jan 2008
Posts: 540
Location: Granbury Texas

Posted: Sat Aug 16, 2008 10:48 pm Post subject: Countersink

Ok countersinkers, we now know where the countersink is.... my brother just brought us our mail from the shop, and low and behold, Fred sent it right back to me.  Fred, thanks for thinking of me, but there's labels inside the package, and there was a reason there wasn't a label for me.... cause I already finished with it.  Anyway, Pascal, you're next on the list followed by Lew.  Since it's Sat. night, it won't go out until Monday, so let me know if either of you still need it..... and I'll revise the list.   Thanks Fred.

 Don McDonald

 #40636

 Finishing



--- On Sat, 8/16/08, Rick Sked <ricksked(at)embarqmail.com> wrote:



 [quote]From: Rick Sked <ricksked(at)embarqmail.com>

Subject: Re: Re: Countersink

To: rv10-list(at)matronics.com

Date: Saturday, August 16, 2008, 12:19 PM



[quote]--> RV10-List message posted by: Rick Sked <ricksked(at)embarqmail.com>  Bob,  Just borrow mine when you need it.  Rick S. 40185 ---

_________________
Don A. McDonald
40636

Lew Gallagher

Joined: 04 Jan 2008
Posts: 402
Location: Greenville , SC

Posted: Sun Aug 17, 2008 4:47 am Post subject: Re: Countersink

Hey Don,



I was wondering if/why Fred sent it back to you and where it was.  Here is the revised list:



10) Pascal Reid

11) Charles Usery

12) Gary Blankenbiller 

13) Phil White

14) Bob Kaufmann

15) Lew Gallagher

    

And then Pascal has "deferred" and then undeferred -- so let's just stick with the list.  I'll snail mail Pascal the list with new labels so that by the time he gets it and is ready to send it on, it should be up to date.



Shouldn't be too difficult for guys who can navigate across the country in intricate flyin' machines they've meticulously assembled!  Just cross yourself off the list and send it on to the next.



Unless you are installing different seatbelts (retractable, etc.) the standard one from Van's uses this countersink for one hole each, left and right, for the front shoulder belts, centered in the "hard point" in the canopy.  The bolts are included in the bag labeled miscellaneous (I think #1541), so you don't need to wait until you get the belts to go ahead and countersink the canopy.



Of course this is much ado about nothing -- but it's a great bonding exercise!  And as long as it's still cutting clean countersinks, why not.  Heck, if I could think of a way to circulate my laser guided dimpler this easily, I'd circulate that!



Later, - Lew



do not archive

_________________
non-pilot
crazy about building
NOW OFICIALLY BUILDER #40549
Fly off completed !

bob.kaufmann(at)cox.net
Guest

Posted: Sun Aug 17, 2008 5:24 am Post subject: Countersink

You can take me off the list.

Bob Kaufmann



--

pascal(at)rv10builder.net
Guest

Posted: Sun Aug 17, 2008 3:52 pm Post subject: Countersink

totally my fault! Dr Fred sent it to you. I  thought you were after me and asked to send to you. 

 Had in laws and they really confused me these last  few weeks. Take your time and send it my way, I'll have it out per Lew's list by  end of the week for the next user.

 My lesson learned is that the in-laws will not fly  with me. Although those negative G's would be a fun ride to assure they never  did again anyway [img]cid:95AC41757E5643429B4D32E5C79C29E2(at)pascaldell[/img]

 Pascal

  



  From: Don McDonald (building_partner(at)yahoo.com) 

 Sent: Saturday, August 16, 2008 11:45 PM

 To: rv10-list(at)matronics.com (rv10-list(at)matronics.com) 

 Subject: Re: Re: Countersink

 



                   Ok countersinkers, we now know where the countersink is.... my        brother just brought us our mail from the shop, and low and behold, Fred        sent it right back to me.  Fred, thanks for thinking of me, but        there's labels inside the package, and there was a reason there wasn't a        label for me.... cause I already finished with it.  Anyway, Pascal,        you're next on the list followed by Lew.  Since it's Sat. night, it        won't go out until Monday, so let me know if either of you still need        it..... and I'll revise the list.   Thanks Fred.

       Don McDonald

       #40636

       Finishing



--- On Sat, 8/16/08, Rick Sked        <ricksked(at)embarqmail.com> wrote:



       [quote]From:          Rick Sked <ricksked(at)embarqmail.com>

Subject: Re: Re:          Countersink

To: rv10-list(at)matronics.com

Date: Saturday, August 16,          2008, 12:19 PM



[quote]--> RV10-List message posted by: Rick Sked <ricksked(at)embarqmail.com>  Bob,  Just borrow mine when you need it.  Rick S. 40185 ---

Emoticon3.gif

Description:

Filesize:

1.31 KB

Viewed:

6000 Time(s)

ricksked(at)embarqmail.co
Guest

Posted: Sun Aug 17, 2008 4:32 pm Post subject: Countersink

Lol...you guys got to be kiddin me...is this a counter sink or a Yard Gnome...May I suggest you take a picture of it next to a local famous landmark close to you and blog this thing? The Today show would love it!! The could call it "Where in the world is our countersink!!!" 

I've watched this thread for months, deleting them as they show up, but now it's interesting!!! This could move homebuilding into the limelight on the national media!!! I'm not kidding!!! Look where this 1 oz. part has traveled!!! 

OK...I'll stop..Supper time...but Fox News would love it!!!!...I can see Gretchen or Alysin twistin their legs (very nice and tanned  legs on both of them) and tellin all about us crazy, tool sharing, airplane builders and how we have united!!! 

All kidding aside...would it not be neat to take a picture of this thing next to something famous in your home town and making a story about it?? Those who don't know me will just dismiss me as Rick S., the guy who knew James McClow...so sad too bad...   Big Smile  Let's eat!!! 

Rick Sked 

40185 

Honest...will fly in the next two months!!! really...cringing as I hit send!!! 

  

do not archive

---

drfred(at)suddenlinkmail.
Guest

Posted: Sun Aug 17, 2008 4:34 pm Post subject: Countersink

sorry for the confusion.  I couldn't find the last email on the 

countersink so I sent it to the next person on the list and crossed my 

name off.   Where's waldo? 



Dr. Fred. 



pascal wrote:

[quote] totally my fault! Dr Fred sent it to you. I thought you were after me 

 and asked to send to you.

 Had in laws and they really confused me these last few weeks. Take 

 your time and send it my way, I'll have it out per Lew's list by end 

 of the week for the next user.

 My lesson learned is that the in-laws will not fly with me. Although 

 those negative G's would be a fun ride to assure they never did again 

 anyway Winking smile emoticon

 Pascal



 *From:* Don McDonald <mailto:building_partner(at)yahoo.com>

 *Sent:* Saturday, August 16, 2008 11:45 PM

 *To:* rv10-list(at)matronics.com <mailto:rv10-list(at)matronics.com>

 *Subject:* Re: Re: Countersink



 Ok countersinkers, we now know where the countersink is.... my brother 

 just brought us our mail from the shop, and low and behold, Fred sent 

 it right back to me.  Fred, thanks for thinking of me, but there's 

 labels inside the package, and there was a reason there wasn't a label 

 for me.... cause I already finished with it.  Anyway, Pascal, you're 

 next on the list followed by Lew.  Since it's Sat. night, it won't go 

 out until Monday, so let me know if either of you still need it..... 

 and I'll revise the list.   Thanks Fred.

 Don McDonald

 #40636

 Finishing



 --- On *Sat, 8/16/08, Rick Sked /<ricksked(at)embarqmail.com>/* wrote:



     From: Rick Sked <ricksked(at)embarqmail.com>

     Subject: Re: Re: Countersink

     To: rv10-list(at)matronics.com

     Date: Saturday, August 16, 2008, 12:19 PM



     



     Bob,



     Just borrow mine when you need it.



     Rick S.

     40185

     ---

partner14

Joined: 12 Jan 2008
Posts: 540
Location: Granbury Texas

Posted: Sun Aug 17, 2008 5:49 pm Post subject: Countersink

It seems like such a shame to get these again and not use them.....  maybe I'll go down to the hanger in the morning and just countersink a few extra holes in the canopy!    Sorry Fred, it wasn't your fault.  You're allowed one punch in the arm when we meet up.

 Don



--- On Sun, 8/17/08, pascal <pascal(at)rv10builder.net> wrote:



 [quote]From: pascal <pascal(at)rv10builder.net>

Subject: Re: Re: Countersink

To: rv10-list(at)matronics.com

Date: Sunday, August 17, 2008, 4:52 PM



  totally my fault! Dr Fred sent it to you. I thought you were after me and asked to send to you. 

 Had in laws and they really confused me these last few weeks. Take your time and send it my way, I'll have it out per Lew's list by end of the week for the next user.

 My lesson learned is that the in-laws will not fly with me. Although those negative G's would be a fun ride to assure they never did again anyway [img]cid:1.1416266190(at)web53712.mail.re2.yahoo.com[/img]

 Pascal

  



  From: Don McDonald (building_partner(at)yahoo.com) 

 Sent: Saturday, August 16, 2008 11:45 PM

 To: rv10-list(at)matronics.com (rv10-list(at)matronics.com) 

 Subject: Re: Re: Countersink

 



     Ok countersinkers, we now know where the countersink is.... my brother just brought us our mail from the shop, and low and behold, Fred sent it right back to me.  Fred, thanks for thinking of me, but there's labels inside the package, and there was a reason there wasn't a label for me.... cause I already finished with it.  Anyway, Pascal, you're next on the list followed by Lew.  Since it's Sat. night, it won't go out until Monday, so let me know if either of you still need it..... and I'll revise the list.   Thanks Fred.

 Don McDonald

 #40636

 Finishing



--- On Sat, 8/16/08, Rick Sked <ricksked(at)embarqmail.com> wrote:



 [quote]From: Rick Sked <ricksked(at)embarqmail.com>

Subject: Re: Re: Countersink

To: rv10-list(at)matronics.com

Date: Saturday, August 16, 2008, 12:19 PM



[quote]--> RV10-List message posted by: Rick Sked <ricksked(at)embarqmail.com>  Bob,  Just borrow mine when you need it.  Rick S. 40185 ---

Emoticon3.gif

Description:

Filesize:

1.31 KB

Viewed:

5999 Time(s)

_________________
Don A. McDonald
40636

pascal(at)rv10builder.net
Guest

Posted: Sun Aug 24, 2008 10:24 am Post subject: Countersink

Charles;

The countersink is on it's way to you and should arrive in the next day or 

so.

I have the labels Lew sent enclosed  for Gary.



Thanks Lew ! Also the builder that owns and is sharing the countersink. 

Sorry forget your name but I appreciate it nevertheless.



Pascal



--------------------------------------------------

From: "Lew Gallagher" <lewgall(at)charter.net>

Sent: Sunday, August 17, 2008 5:47 AM

To: <rv10-list(at)matronics.com>

Subject: Re: Countersink



 	  Quote: 	
		   



 Hey Don,



 I was wondering if/why Fred sent it back to you and where it was.  Here is 

 the revised list:



 10) Pascal Reid

 11) Charles Usery

 12) Gary Blankenbiller

 13) Phil White

 14) Bob Kaufmann

 15) Lew Gallagher



 And then Pascal has "deferred" and then undeferred -- so let's just stick 

 with the list.  I'll snail mail Pascal the list with new labels so that by 

 the time he gets it and is ready to send it on, it should be up to date.



 Shouldn't be too difficult for guys who can navigate across the country in 

 intricate flyin' machines they've meticulously assembled!  Just cross 

 yourself off the list and send it on to the next.



 Unless you are installing different seatbelts (retractable, etc.) the 

 standard one from Van's uses this countersink for one hole each, left and 

 right, for the front shoulder belts, centered in the "hard point" in the 

 canopy.  The bolts are included in the bag labeled miscellaneous (I think 

 #1541), so you don't need to wait until you get the belts to go ahead and 

 countersink the canopy.



 Of course this is much ado about nothing -- but it's a great bonding 

 exercise!  And as long as it's still cutting clean countersinks, why not. 

 Heck, if I could think of a way to circulate my laser guided dimpler this 

 easily, I'd circulate that!



 Later, - Lew



 do not archive



 --------

 non-pilot

 crazy about building

 NOW OFICIALLY BUILDER #40549

 Engine and FF here, now cowl and baffels,waiting on prop.





 Read this topic online here:



 http://forums.matronics.com/viewtopic.php?p=199055#199055

bob.kaufmann(at)cox.net
Guest

Posted: Sun Aug 24, 2008 12:28 pm Post subject: Countersink

Scratch Bob Kaufmann from the list.



--

pascal(at)rv10builder.net
Guest

Posted: Sun Aug 24, 2008 4:11 pm Post subject: Countersink

So looks like Lew gets it after Phil



 	  Quote: 	
		  > 11) Charles Usery

> 12) Gary Blankenbiller

> 13) Phil White

> 14) Lew Gallagher

> 15) TBD

--------------------------------------------------
	


From: "Bob Kaufmann" <bob.kaufmann(at)cox.net>

Sent: Sunday, August 24, 2008 1:26 PM

To: <rv10-list(at)matronics.com>

Subject: RE: Re: Countersink



[quote] 



 Scratch Bob Kaufmann from the list.



 --

Display posts from previous:

	Matronics Email Lists Forum Index -> RV10-List	All times are GMT - 8 Hours
Page 1 of 1

Jump to:

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum