Matronics Email Lists Forum Index Matronics Email Lists
Web Forum Interface to the Matronics Email Lists
 
 Get Email Distribution Too!Get Email Distribution Too!    FAQFAQ   SearchSearch   MemberlistMemberlist   UsergroupsUsergroups   RegisterRegister 
 ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 

Trim Tab

 
Post new topic   Reply to topic    Matronics Email Lists Forum Index -> RV-List
View previous topic :: View next topic  
Author Message
robertrv607(at)yahoo.com
Guest





PostPosted: Sat Sep 27, 2008 10:03 am    Post subject: Trim Tab Reply with quote

Hi

Recently I have aproblem with the Elec. Trim...II have an RV6A;
When flying, the trim without a reason, goes full up, pitch up....I reset it, and works
Ok for some time..

It is intermitten....Does any one have any idea what can create this auto change???
I know I can put a swuitch to disconnect it... that is not the question..
is a technical for those wiith electrical Knowledge....

I think is always uP... but maybe it has gone down also,,,, I have to check this
to be sure...I know the up is complete full defflextion...

I hate to think I have to opoen everything under,,, to check wires to the
stick???

Suggestions appreciated.

Bert
rv6a

do not archive

[quote][b]


- The Matronics RV-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?RV-List
Back to top
carl.froehlich(at)cox.net
Guest





PostPosted: Sat Sep 27, 2008 10:19 am    Post subject: Trim Tab Reply with quote

I’d start with the wires to the stick. As this is an intermittent, my guess is you have a chafing problem so first look at where the wire come out of the stick.

Carl Froehlich
RV-8A (450 hrs)
RV-10 (fuselage)

From: owner-rv-list-server(at)matronics.com [mailto:owner-rv-list-server(at)matronics.com] On Behalf Of bert murillo
Sent: Saturday, September 27, 2008 2:02 PM
To: rv-list(at)matronics.com
Subject: Trim Tab


Hi



Recently I have aproblem with the Elec. Trim...II have an RV6A;

When flying, the trim without a reason, goes full up, pitch up....I reset it, and works

Ok for some time..



It is intermitten....Does any one have any idea what can create this auto change???

I know I can put a swuitch to disconnect it... that is not the question..

is a technical for those wiith electrical Knowledge....



I think is always uP... but maybe it has gone down also,,,, I have to check this

to be sure...I know the up is complete full defflextion...



I hate to think I have to opoen everything under,,, to check wires to the

stick???



Suggestions appreciated.



Bert

rv6a



do not archive

Quote:
http://www.matronics.com/Navigator?RV-List
0
Quote:
1
Quote:
2
Quote:
3
Quote:
4
Quote:
5
Quote:
6
Quote:
7
Quote:
8
Quote:
9
[quote][b]


- The Matronics RV-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?RV-List
Back to top
n8zg(at)mchsi.com
Guest





PostPosted: Sat Sep 27, 2008 10:23 am    Post subject: Trim Tab Reply with quote

Bert –

Ray Allen had a run of the original-style trim relays with a high failure rate.
The old relays are considerably smaller than the current crop.
Visit the website and compare the photo of the new style to yours.
If you have the old style, I’d contact the company and request replacement.

neal

From: owner-rv-list-server(at)matronics.com [mailto:owner-rv-list-server(at)matronics.com] On Behalf Of bert murillo
Sent: Saturday, September 27, 2008 1:02 PM
To: rv-list(at)matronics.com
Subject: Trim Tab


Hi



Recently I have aproblem with the Elec. Trim...II have an RV6A;

When flying, the trim without a reason, goes full up, pitch up....I reset it, and works

Ok for some time..



It is intermitten....Does any one have any idea what can create this auto change???

I know I can put a swuitch to disconnect it... that is not the question..

is a technical for those wiith electrical Knowledge....



I think is always uP... but maybe it has gone down also,,,, I have to check this

to be sure...I know the up is complete full defflextion...



I hate to think I have to opoen everything under,,, to check wires to the

stick???



Suggestions appreciated.



Bert

rv6a



do not archive

Quote:
http://www.matronics.com/Navigator?RV-List
0
Quote:
1
Quote:
2
Quote:
3
Quote:
4
Quote:
5
Quote:
6
Quote:
7
Quote:
8
Quote:
9
[quote][b]


- The Matronics RV-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?RV-List
Back to top
kcflyrv(at)comcast.net
Guest





PostPosted: Sat Sep 27, 2008 1:49 pm    Post subject: Trim Tab Reply with quote

Ditto,
It was the relay that failed in my case about 2 years ago. (RV6) Ray Allen sent me a replacement and it has been perfect ever since.

765 hours
Ken Cantrell
Web:www.viewpointphoto.net
[img]cid:image002.jpg(at)01C920B0.14346200[/img]





From: owner-rv-list-server(at)matronics.com [mailto:owner-rv-list-server(at)matronics.com] On Behalf Of Neal George
Sent: Saturday, September 27, 2008 11:22 AM
To: rv-list(at)matronics.com
Subject: RE: Trim Tab


Bert –

Ray Allen had a run of the original-style trim relays with a high failure rate.
The old relays are considerably smaller than the current crop.
Visit the website and compare the photo of the new style to yours.
If you have the old style, I’d contact the company and request replacement.

neal

From: owner-rv-list-server(at)matronics.com [mailto:owner-rv-list-server(at)matronics.com] On Behalf Of bert murillo
Sent: Saturday, September 27, 2008 1:02 PM
To: rv-list(at)matronics.com
Subject: Trim Tab


Hi



Recently I have aproblem with the Elec. Trim...II have an RV6A;

When flying, the trim without a reason, goes full up, pitch up....I reset it, and works

Ok for some time..



It is intermitten....Does any one have any idea what can create this auto change???

I know I can put a swuitch to disconnect it... that is not the question..

is a technical for those wiith electrical Knowledge....



I think is always uP... but maybe it has gone down also,,,, I have to check this

to be sure...I know the up is complete full defflextion...



I hate to think I have to opoen everything under,,, to check wires to the

stick???



Suggestions appreciated.



Bert

rv6a



do not archive

Quote:
http://www.matronics.com/Navigator?RV-List
Quote:
http://forums.matronics.com
Quote:
http://www.matronics.com/contribution
Quote:
0
Quote:
1
Quote:
2
Quote:
3
Quote:
4
Quote:
5
Quote:
6
Quote:
7
Quote:
8
Quote:
9
Quote:
0
Quote:
1
Quote:
2
Quote:
3
Quote:
4
Quote:
5
Quote:
6
Quote:
7
Quote:
8
Quote:
9


- The Matronics RV-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?RV-List



image002.jpg
 Description:
 Filesize:  5.35 KB
 Viewed:  1569 Time(s)

image002.jpg


Back to top
Display posts from previous:   
Post new topic   Reply to topic    Matronics Email Lists Forum Index -> RV-List All times are GMT - 8 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum


Powered by phpBB © 2001, 2005 phpBB Group