Matronics Email Lists :: View topic

Matronics Email Lists
Web Forum Interface to the Matronics Email Lists

Get Email Distribution Too! FAQ Search Memberlist Usergroups Register

Profile Log in to check your private messages Log in

Mod 72

Matronics Email Lists Forum Index -> Europa-List

View previous topic :: View next topic

Author Message

jimpuglise(at)comcast.net
Guest

Posted: Wed Oct 01, 2008 7:54 am Post subject: Mod 72

I just completed Mod 72 and I can't believe how easy it was.  The reaming took no more than 5 minutes, I kept the inserts in the freezer overnight, heated the reamed pieces, applied ACF-50 to the inserts and in they went.  It took two taps from a US made hammer to move them the last 1/2 inch or so.  

  

 If you lay the inserts beside the reamer, you can put a mark on the shank with a felt pen indicating how deep it must go.  I marked it so, excluding the tapered end from the measurement and it went to that depth with no problem.  Blew the swarf out and in they went.    

  

 The whole process took 20 minutes or so.

  

 Jim Puglise, A-283

  [quote][b]

- The Matronics Europa-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Europa-List

rob(at)hyperion-ef.com
Guest

Posted: Wed Oct 01, 2008 8:13 am Post subject: Mod 72

I’m envious.  

   

     

Best regards,  

   

Rob Housman  

Irvine, CA   

Europa XS Tri-Gear  

A070  

Airframe complete  

  

       

From: owner-europa-list-server(at)matronics.com [mailto:owner-europa-list-server(at)matronics.com] On Behalf Of jimpuglise(at)comcast.net

 Sent: Wednesday, October 01, 2008 8:54 AM

 To: Europa List

 Subject: Mod 72  

  

  

     

I just completed Mod 72 and I can't believe how easy it was.  The reaming took no more than 5 minutes, I kept the inserts in the freezer overnight, heated the reamed pieces, applied ACF-50 to the inserts and in they went.  It took two taps from a US made hammer to move them the last 1/2 inch or so.    

    

   

    

If you lay the inserts beside the reamer, you can put a mark on the shank with a felt pen indicating how deep it must go.  I marked it so, excluding the tapered end from the measurement and it went to that depth with no problem.  Blew the swarf out and in they went.      

    

   

    

The whole process took 20 minutes or so.  

    

   

    

Jim Puglise, A-283  

   	  Quote: 	
		    http://www.matronics.com/Navigator?Europa-List 	
0 	  Quote: 	
		   	
1 	  Quote: 	
		   	
2 	  Quote: 	
		   	
3 	  Quote: 	
		   	
4 	  Quote: 	
		   	
5 	  Quote: 	
		   	
6 	  Quote: 	
		   	
7 	  Quote: 	
		   	
8 	  Quote: 	
		   	
9

       [quote][b]

- The Matronics Europa-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Europa-List

pjeffers(at)talktalk.net
Guest

Posted: Wed Oct 01, 2008 10:03 am Post subject: Mod 72

Good that the mod goes so well for some. It did for me also, and all I did was to follow the instructions.

 Pete Jeffers

 

 

 --

- The Matronics Europa-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Europa-List

Display posts from previous:

	Matronics Email Lists Forum Index -> Europa-List	All times are GMT - 8 Hours
Page 1 of 1

Jump to:

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum