Matronics Email Lists :: View topic - VOR interference with other wiring?

Matronics Email Lists
Web Forum Interface to the Matronics Email Lists

Get Email Distribution Too! FAQ Search Memberlist Usergroups Register

Profile Log in to check your private messages Log in

VOR interference with other wiring?

Matronics Email Lists Forum Index -> AeroElectric-List

View previous topic :: View next topic

Author Message

jef.vervoortw(at)telenet.
Guest

Posted: Sun Jan 04, 2009 10:54 am Post subject: VOR interference with other wiring?

Hello,



I'm mounting a Bob Archer VOR antenna in the right wingtip.

There will be also lights, nav. & landing & strobe.

The strobes will be powered by a single power pack in the fuselage, using a

shielded cable ( from Whelen).

I have mounted a corrugated nylon conduit in the wings, and was planning to

put all the wires, including the VOR coax, together in this conduit.



Is this a good solution? I do not find accurate info in the archives.



Thanks; Jef Vervoort, RV9A.

- The Matronics AeroElectric-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?AeroElectric-List

Dennis Glaeser

Joined: 10 Jan 2006
Posts: 53
Location: Rochester Hills, Michigan

Posted: Sun Jan 04, 2009 1:46 pm Post subject: VOR interference with other wiring?

I did exactly that on my RV7A and have no problems whatsoever.  



Dennis Glaeser



-----------------------------------

Hello,

I'm mounting a Bob Archer VOR antenna in the right wingtip.

There will be also lights, nav. & landing & strobe.

The strobes will be powered by a single power pack in the fuselage, using a

shielded cable ( from Whelen).

I have mounted a corrugated nylon conduit in the wings, and was planning to

put all the wires, including the VOR coax, together in this conduit.



Is this a good solution? I do not find accurate info in the archives.



Thanks; Jef Vervoort, RV9A.

- The Matronics AeroElectric-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?AeroElectric-List

nuckolls.bob(at)aeroelect
Guest

Posted: Mon Jan 05, 2009 1:29 pm Post subject: VOR interference with other wiring?

It's a well watered and fertilized myth that strobe head

    wires are a noise coupling risk to coaxial feedlines to

    antennas. You may route them together without concern.



    Bob . . .

At 03:44 PM 1/4/2009, you wrote:

 	  Quote: 	
		  

<glaesers(at)wideopenwest.com>



I did exactly that on my RV7A and have no problems whatsoever.



Dennis Glaeser



-----------------------------------

Hello,

I'm mounting a Bob Archer VOR antenna in the right wingtip.

There will be also lights, nav. & landing & strobe.

The strobes will be powered by a single power pack in the fuselage, using a

shielded cable ( from Whelen).

I have mounted a corrugated nylon conduit in the wings, and was planning to

put all the wires, including the VOR coax, together in this conduit.



Is this a good solution? I do not find accurate info in the archives.



Thanks; Jef Vervoort, RV9A.

- The Matronics AeroElectric-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?AeroElectric-List

Display posts from previous:

	Matronics Email Lists Forum Index -> AeroElectric-List	All times are GMT - 8 Hours
Page 1 of 1

Jump to:

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum