Matronics Email Lists Forum Index Matronics Email Lists
Web Forum Interface to the Matronics Email Lists
 
 Get Email Distribution Too!Get Email Distribution Too!    FAQFAQ   SearchSearch   MemberlistMemberlist   UsergroupsUsergroups   RegisterRegister 
 ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 

firewall sealant and valve option

 
Post new topic   Reply to topic    Matronics Email Lists Forum Index -> RV10-List
View previous topic :: View next topic  
Author Message
pascal(at)rv10builder.net
Guest





PostPosted: Wed Feb 04, 2009 1:57 pm    Post subject: firewall sealant and valve option Reply with quote

I have been working with Paul to modify the heater valves as I believe the
product is very solid and seeing the RV-7 vents that have small lips around
them I asked if he would make one like those for the RV-10. I believe he is
working on this and it will be a Must have as Mike has mentioned.
I am rather certain that the hot tunnel will be diminished. I'll report back
once I have the new valve and have completed the heat gun test. I trust
based on the products so far that it will be a worthwhile investment. My
reasoning is what good is a stainless steel firewall with a weak aluminum
valve that gaps/leaks when there is the option to have stainless steel valve
that has lips that blocks the gaps.
Pascal

--------------------------------------------------
From: "AirMike" <Mikeabel(at)Pacbell.net>
Sent: Wednesday, February 04, 2009 12:37 PM
To: <rv10-list(at)matronics.com>
Subject: Re: Cowl hinge sealant?

Quote:


Paul Bowmar at Plane Innovations LLC (formerly of EPM-AV) has an excellent
and thoroughly tested products.

He sells a 2000 degree silicone seal for his fire protection kits. He will
sell you some at a reasonable price. This stuff should be a lot better
than the red goop........I bought some myself.

Bowmar also sells the stainless steel heater valves to replace the
aluminum Van's valves on the firewall. I consider this a MANDATORY Option
(along with the rivethead door pins and CNC trim blocks) when you are
building this kit. It would be foolish to spend a lot of time on hi-temp
sealant and ignore the biggest risk area on your firewall. As I recall the
Plane Innovations SS valves are $200 and Vans will give you a $100 credit
on the aluminum ones deleted from the kit.

--------
OSH '08 or Bust (busted) be there in &quot;09
Q/B Kit - wiring and FWF


Read this topic online here:

http://forums.matronics.com/viewtopic.php?p 28510#228510





- The Matronics RV10-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?RV10-List
Back to top
Display posts from previous:   
Post new topic   Reply to topic    Matronics Email Lists Forum Index -> RV10-List All times are GMT - 8 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum


Powered by phpBB © 2001, 2005 phpBB Group