 |
Matronics Email Lists
Web Forum Interface to the Matronics Email Lists
|
| View previous topic :: View next topic |
| Author |
Message |
aslsa.rng(at)gmail.com
Guest
|
 Posted: Mon Feb 16, 2009 8:57 am Post subject: Oil in exhaust & Exhaust Pipe Capscrews |
 |
|
Larry, It's my experience that 262 Locktite (red, permanent) just gets undone by the heat in the exhaust pipe area, 242 (blue, service removable) seems a bit better. For what it's worth.
Rick
On Sun, Feb 15, 2009 at 7:17 PM, lwhitlow <ldwhitlow(at)comcast.net (ldwhitlow(at)comcast.net)> wrote:
[quote] --> JabiruEngine-List message posted by: "lwhitlow" <ldwhitlow(at)comcast.net (ldwhitlow(at)comcast.net)>
Ok So I got the EGT probes installed.
I took off the cap screws holding the pipes on Drilled the hole for the EGT and re-installed the pipe. The question is should I use Loctite on the the cap screws when I put them back in?
On another note when I took of the number one pipe, I noted a amount of engine oil in this pipe alone. Normal?? None of the others had any oil just the number one
Thanks
Larry
Read this topic online here:
http://forums.matronics.com/viewtopic.php?p=230431#230431
===========
-
ine-List" target="_blank">http://www.matronics.com/Navigator?JabiruEngine-List
===========
MS -
k">http://forums.matronics.com
===========
e -
-Matt Dralle, List Admin.
t="_blank">http://www.matronics.com/contribution
===========
[b]
| | - The Matronics JabiruEngine-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?JabiruEngine-List |
|
|
|
| Back to top |
|
 |
cffd(at)pgrb.com
Guest
|
| Posted: Tue Feb 17, 2009 8:48 am Post subject: Oil in exhaust & Exhaust Pipe Capscrews |
|
|
Larry,
I would not use any locktite on these screws. They have a star lock washer
on them.
In fact, I use antiseize on mine. I check mine every oil change. If you
ever need to
remove them, chances are the bolt will have seized to the aluminum and will
break off.
You need to be very careful of screws in aluminum especially hot locations
like the
exhaust pipes to aluminum heads. Same antiseize compound as the spark
plugs.
My opinion.
Chuck D.
| Quote: | Subject: Re: Oil in exhaust & Exhaust Pipe Capscrews
From: Richard Girard <aslsa.rng(at)gmail.com>
Larry, It's my experience that 262 Locktite (red, permanent) just gets
undone by the heat in the exhaust pipe area, 242 (blue, service removable)
seems a bit better. For what it's worth.
Rick
On Sun, Feb 15, 2009 at 7:17 PM, lwhitlow <ldwhitlow(at)comcast.net> wrote:
> >
>
> Ok So I got the EGT probes installed.
>
> I took off the cap screws holding the pipes on Drilled the hole for the
> EGT and re-installed the pipe. The question is should I use Loctite on
> the
> the cap screws when I put them back in?
>
> On another note when I took of the number one pipe, I noted a amount of
> engine oil in this pipe alone. Normal?? None of the others had any oil
> just
> the number one
>
> Thanks
>
> Larry
> Read this topic online here:
>
> http://forums.matronics.com/viewtopic.php?p 30431#230431
--
Checked by AVG.
02/15/2009 6:09 PM
|
| | - The Matronics JabiruEngine-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?JabiruEngine-List |
|
|
|
| Back to top |
|
|
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum
|
Powered by phpBB © 2001, 2005 phpBB Group
|
Get Email Distribution Too!
FAQ
Search
Memberlist
Usergroups
Register
Profile
Log in to check your private messages
Log in
