 |
Matronics Email Lists Web Forum Interface to the Matronics Email Lists
|
View previous topic :: View next topic |
Author |
Message |
Rowland_Carson
Joined: 04 Jul 2008 Posts: 155 Location: Cheltenham, England
|
Posted: Wed Jun 24, 2009 6:35 am Post subject: aileron etc weights [was: Europa 4-seater] |
|
|
At 2009-06-24 13:12 +0300 Raimo Toivio wrote:
Quote: | I called Andy Draper 26. January 2000 and he stated "The Ideal
weight of the umpainted aileron is around 1100 grams +/- 10%". I was
so happy my ailerons were 1126 grams /stbd and 1150 grams /port
|
Raimo - please tell me that was BEFORE you added the horn balances! I
didn't weigh mine until after the horns were added and they came out
at 2505g (starboard) and 2495g (port) which seems unbelievably heavy
in comparison.
I did weigh the lead weights before they were fitted to the horns and
they were about 520g each, so subtracting 2 of those gives about
1460g for the aileron structure without the lead.
My flaps seem pretty heavy too - they are 3285g (starboard) and 3225g (port).
None of the above are profiled or painted yet, they are just as laid
up, with the peel-ply removed.
Any comments from others who have weighed their control surfaces?
regards
Rowland
--
| Rowland Carson LAA #16532 http://home.clara.net/rowil/aviation/
| 1280 hours building Europa #435 G-ROWI e-mail <rowil(at)clara.net>
| - The Matronics Europa-List Email Forum - | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?Europa-List |
|
|
|
Back to top |
|
 |
raimo.toivio(at)rwm.fi Guest
|
Posted: Wed Jun 24, 2009 7:39 am Post subject: aileron etc weights [was: Europa 4-seater] |
|
|
Row - take it easy!
That "ideal weight for ailerons" was
- just after removing peel ply
- before horns
- before mass balances
and even
- before hinges!
I am sure your ailerons are first class and strong enough.
I could not find easily "ideal weights" or "my weights" for the flaps but I have a memory they were around 2500 grams WITHOUT hinges again.
I think some kind of the proof of the high quality workmanship is that your weights between port and stbd-side flaps and ailerons are so near with each others ( flaps 3285g and 3225g - that means less than 2%, ailerons at 2505g and 2495g, that means less than 0,4% !!!).
Instead of that I found a rudder weight. That was 1813 grams WITH rudder horn but before surface (and Mr Neville Eyre stated 1/12/1999 1800 grams would be ideal and sooooo happy I were).
Are you happy now?
Raimo OH-XRT
---
| - The Matronics Europa-List Email Forum - | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?Europa-List |
|
|
|
Back to top |
|
 |
Rowland_Carson
Joined: 04 Jul 2008 Posts: 155 Location: Cheltenham, England
|
Posted: Wed Jun 24, 2009 9:54 am Post subject: aileron etc weights [was: Europa 4-seater] |
|
|
At 2009-06-24 18:39 +0300 Raimo Toivio wrote:
Quote: | Instead of that I found a rudder weight. That was 1813 grams WITH
rudder horn but before surface
|
Raimo - I didn't weigh my rudder before I profiled and gel-coat
finished it (didn't have a handy digital fish scale or baggage scale
back then). It is now 2905g with hinges fitted and horn in LE for
pushrod control. I think I applied the Schwabellack gel-coat about 5
times and rubbed almost all of it off again before discovering where
to STOP rubbing! So, there may be a bit more weight in the finish
than is ideal. But, you have to start practising somewhere ...
Quote: | Neville Eyre stated 1/12/1999 1800 grams would be ideal
|
I wish these "ideal" component weights had been advertised a bit more
widely back then - they would have been a guide to how well one is
doing in keeping out excess weight (usually excess epoxy on the
control surfaces).
regards
Rowland
--
| Rowland Carson LAA #16532 http://home.clara.net/rowil/aviation/
| 1280 hours building Europa #435 G-ROWI e-mail <rowil(at)clara.net>
| - The Matronics Europa-List Email Forum - | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?Europa-List |
|
|
|
Back to top |
|
 |
raimo.toivio(at)rwm.fi Guest
|
Posted: Wed Jun 24, 2009 12:23 pm Post subject: aileron etc weights [was: Europa 4-seater] |
|
|
Quote: | I wish these "ideal" component weights had been advertised a bit more
widely back then - they would have been a guide to how well one is
doing in keeping out excess weight (usually excess epoxy on the
|
Row,
That information was there just because I called factory and asked during those days.
That was because I HAD NO IDEA WHAT´S THE QUALITY OF MY WORK.
Could you imagine the situation to be *only one* in the country building Europa or even ANY composite plane?
I promise that was a lonely man project.
You englismen will find almost a nearest village and a nearest Europa builder is there - is not that so?
Anyway - I do think "ideal weights" come "automatically" after a good workmanship.
You have proved it. Me too.
That is because weldone manual - thanks to Europa factory, Andy and Nev I think.
Raimo OH-XRT
| - The Matronics Europa-List Email Forum - | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?Europa-List |
|
|
|
Back to top |
|
 |
|
|
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum You cannot attach files in this forum You can download files in this forum
|
Powered by phpBB © 2001, 2005 phpBB Group
|