Matronics Email Lists :: View topic - Hanger for shoulder belts?

Matronics Email Lists
Web Forum Interface to the Matronics Email Lists

Get Email Distribution Too! FAQ Search Memberlist Usergroups Register

Profile Log in to check your private messages Log in

Hanger for shoulder belts?

Matronics Email Lists Forum Index -> RV10-List

View previous topic :: View next topic

Author Message

tdawson-townsend(at)auror
Guest

Posted: Thu Jul 09, 2009 3:10 pm Post subject: Hanger for shoulder belts?

For those who have installed a hanger on the cabin roof to hold front shoulder belts handy, where did you put it?  I'd like to install one in the middle with two hooks, but don't have seats installed to "feel" where a good fore-aft location is.  Can you tell me in inches from the top of the woindshield cabin support or something?

 Thanks for your input!

 

 Tim D-T

 40025

- The Matronics RV10-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?RV10-List

dave.saylor.aircrafters(a
Guest

Posted: Thu Jul 09, 2009 3:56 pm Post subject: Hanger for shoulder belts?

Tim,



We just ordered material for a production run of seat belt hangers.  I think the price will be about $60 including all the instructions and hardware for some high-quality hard points in the ceiling.  Here are a couple of pictures (in a Word document).  We should be shipping soon after Oshkosh.  These work really well, and you will have some variability as to where you place them.  I avoided a hook that protruded down for safety reasons.

 

More soon,



Dave Saylor

AirCrafters LLC

140 Aviation Way

Watsonville, CA 95076

831-722-9141 Shop

831-750-0284 Cell



On Thu, Jul 9, 2009 at 4:09 PM, Dawson-Townsend,Timothy <tdawson-townsend(at)aurora.aero (tdawson-townsend(at)aurora.aero)> wrote:

  	  Quote: 	
		            

For those who have installed a hanger on the cabin roof to hold front shoulder belts handy, where did you put it?  I'd like to install one in the middle with two hooks, but don't have seats installed to "feel" where a good fore-aft location is.  Can you tell me in inches from the top of the woindshield cabin support or something?

  Thanks for your input!

 

 Tim D-T

 40025   

 	


-- 

Dave Saylor

AirCrafters LLC

140 Aviation Way

Watsonville, CA 95076

831-722-9141 Shop

831-750-0284 Cell

- The Matronics RV10-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?RV10-List

Shoulder_Belt_Clips.doc

Description:

Download

Filename:

Shoulder_Belt_Clips.doc

Filesize:

825.5 KB

Downloaded:

323 Time(s)

partner14

Joined: 12 Jan 2008
Posts: 540
Location: Granbury Texas

Posted: Thu Jul 09, 2009 4:24 pm Post subject: Hanger for shoulder belts?

This shot of my install should give you a pretty good idea.  They work great.  Almost anywhere close is fine... just a pain to have to reach into the back seat to retieve.  

 Don McDonald



--- On Thu, 7/9/09, Dawson-Townsend,Timothy <tdawson-townsend(at)aurora.aero> wrote:



  	  Quote: 	
		  

From: Dawson-Townsend,Timothy <tdawson-townsend(at)aurora.aero>

Subject: Hanger for shoulder belts?

To: rv10-list(at)matronics.com

Date: Thursday, July 9, 2009, 4:09 PM



  For those who have installed a hanger on the cabin roof to hold front shoulder belts handy, where did you put it?  I'd like to install one in the middle with two hooks, but don't have seats installed to "feel" where a good fore-aft location is.  Can you tell me in inches from the top of the woindshield cabin support or something?

Thanks for your input!



Tim D-T

40025 

Â¦Â·â€º~â€°ÃÂ²,Ãžg(â€“Å Ã“M4Ã“GÃšqÃ¼Â¢ÃªÃ¢zÂ¹ÃžÃÃŠ.Â®'Â«8^E]t.+-fÂ¢â€Z+ÂºtÂ±Ã«axÃ†Â®â€°Ã¢rÃ‚Ã¢Â²Ã‘^jÃ›Â«zÃƒZÂ¾(Â¶Å ÃÂ¡ÂºÃ¨Ã‚Ã‡Â¶Â¦j|â€¹Å Ã‹nÂ¶)bÂ¶'Â¬Â²Ã§!jÃ‚Ã¢Â²Ã•'Ã½+â€ºÂ±ÃŠÃ¢Â¦Ã˜Â¨Å“+rÂ¯y'Å¡ÃˆCÂ£ Ã¥Â¡Â§{ Â¬ï¿½Â®Å’,x(ZÂ´P

- The Matronics RV10-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?RV10-List

IMG_2629c.jpg

Description:

Filesize:

211.42 KB

Viewed:

4318 Time(s)

_________________
Don A. McDonald
40636

paul(at)bwbco.com
Guest

Posted: Fri Jul 10, 2009 10:06 am Post subject: Hanger for shoulder belts?

Take a look at this web site.

 http://www.planeinnovations.com/new%20wheelpant.htm

  

 Paul

 [quote]   ---

- The Matronics RV10-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?RV10-List

flysrv10(at)gmail.com
Guest

Posted: Sat Jul 11, 2009 2:21 am Post subject: Hanger for shoulder belts?

Great headliner!  ( i know we are talking about seat belts)  Where did the headliner come from?  Thanks



Do not archive 



On Jul 9, 2009, at 8:22 PM, Don McDonald wrote:

 	  Quote: 	
		  This shot of my install should give you a pretty good idea.  They work great.  Almost anywhere close is fine... just a pain to have to reach into the back seat to retieve.  

 Don McDonald



--- On Thu, 7/9/09, Dawson-Townsend,Timothy <tdawson-townsend(at)aurora.aero (tdawson-townsend(at)aurora.aero)> wrote:



  	  Quote: 	
		  

From: Dawson-Townsend,Timothy <tdawson-townsend(at)aurora.aero (tdawson-townsend(at)aurora.aero)>

Subject: Hanger for shoulder belts?

To: rv10-list(at)matronics.com (rv10-list(at)matronics.com)

Date: Thursday, July 9, 2009, 4:09 PM



  For those who have installed a hanger on the cabin roof to hold front shoulder belts handy, where did you put it?  I'd like to install one in the middle with two hooks, but don't have seats installed to "feel" where a good fore-aft location is.  Can you tell me in inches from the top of the woindshield cabin support or something?

Thanks for your input!



Tim D-T

40025 

Â¦Â·â€º~â€°ÃÂ²,Ãžg(â€“Å Ã“M4Ã“GÃšqÃ¼Â¢ÃªÃ¢zÂ¹ÃžÃÃŠ.Â®'Â«8^E]t.+-fÂ¢â€Z+ÂºtÂ±Ã«axÃ†ÂÂ®â€°Ã¢rÃ‚Ã¢Â²Ã‘^jÃ›Â«zÃƒZÂ¾(Â¶Å ÃÂ¡ÂºÃ¨Ã‚Ã‡Â¶Â¦j|â€¹Å Ã‹nÂ¶)bÂ¶'Â¬Â²Ã§!jÃ‚Ã¢Â²Ã•'Ã½+â€ºÂ±ÃŠÃ¢Â¦Ã˜Â¨Å“+rÂ¯y'Å¡ÂÃˆCÂ£ Ã¥Â¡Â§{ Â¬ï¿½Â®Å’,x(ZÂ´P

	


       <IMG_2629c.jpg> 	


 [quote][b]

- The Matronics RV10-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?RV10-List

AirMike

Joined: 27 Feb 2007
Posts: 514
Location: Nevada

Posted: Sun Jul 12, 2009 9:52 pm Post subject: Hanger for shoulder belts - very cool and easy

Dave McNeil made a very cool seat belt holder from one piece of aluminum. It is fairly heavy guage aluminum. The idea of the handles is that you pull it away from the cabin top (1/4") to to release the tension that holds the "keeper" edges on the cabin top. That releases the belt. You slide it out and use it. Reverse the process upon landing. Very simple and elegant - all in one piece. Works great - looks great. I would go for a more rounded knob or lower profile, but the setup works great.

- The Matronics RV10-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?RV10-List

P7102376.JPG

Description:

seatbelt retainer

Filesize:

631.44 KB

Viewed:

4245 Time(s)

_________________
See you OSH '18
Q/B - sold.

karolamy(at)roadrunner.co
Guest

Posted: Mon Jul 13, 2009 9:23 am Post subject: Hanger for shoulder belts?

Still looking for the response to where did you get the headliner?  I 

believe the question goes to Don McDonald who  posted the very nice picture 

of the hanger location that prompted the question.  Others are anxiously 

waiting!!!



Thanks,

Rich

- The Matronics RV10-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?RV10-List

partner14

Joined: 12 Jan 2008
Posts: 540
Location: Granbury Texas

Posted: Mon Jul 13, 2009 8:22 pm Post subject: Hanger for shoulder belts?

Yep, I made the hangers for both the shoulder harness and the headsets, but no headliner in my plane... at least not yet.

 Don McDonald

 N414DM - Flying - 55 hours



--- On Mon, 7/13/09, karolamy(at)roadrunner.com <karolamy(at)roadrunner.com> wrote:



  	  Quote: 	
		  

From: karolamy(at)roadrunner.com <karolamy(at)roadrunner.com>

Subject: Hanger for shoulder belts?

To: rv10-list(at)matronics.com

Date: Monday, July 13, 2009, 10:14 AM



 --> RV10-List message posted by: <karolamy(at)roadrunner.com (karolamy(at)roadrunner.com)>



Still looking for the response to where did you get the headliner?  I believe the question goes to Don McDonald who  posted the very nice picture of the hanger location that prompted the question.  Others ar/www.matronics.com/Navigator?RV10-List" sp;--> http://f=             - List Contributionsp;                     &bsp;--> 



	


           [quote][b]

- The Matronics RV10-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?RV10-List

_________________
Don A. McDonald
40636

flysrv10(at)gmail.com
Guest

Posted: Fri Jul 17, 2009 3:14 am Post subject: Hanger for shoulder belts?

Me too.



do not archive

On Jul 13, 2009, at 1:14 PM, <karolamy(at)roadrunner.com> <karolamy(at)roadrunner.com 

 > wrote:



 	  Quote: 	
		   



 Still looking for the response to where did you get the headliner?   

 I believe the question goes to Don McDonald who  posted the very  

 nice picture of the hanger location that prompted the question.   

 Others are anxiously waiting!!!



 Thanks,

 Rich

- The Matronics RV10-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?RV10-List

Display posts from previous:

	Matronics Email Lists Forum Index -> RV10-List	All times are GMT - 8 Hours
Page 1 of 1

Jump to:

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum