 |
Matronics Email Lists
Web Forum Interface to the Matronics Email Lists
|
| View previous topic :: View next topic |
| Author |
Message |
Matt Dralle
Site Admin
Joined: 08 Nov 2005
Posts: 26321
Location: Livermore CA USA
|
 Posted: Sat Aug 29, 2009 4:30 pm Post subject: Hartzell Prop Goes On Today! |
 |
|
Listers!
It seemed like a rather momentous occasion today since the Hartzell CS prop got mounted to the front of the 'ol RV-8 project!! Yahoo! I really like the looks of the non-blended airfoil blades. They just have a more traditional, mean and manly look, IMHO. The 72" dia also has those fatter paddles which looks cool too.
Just two weeks from initial engine mounting to prop installation. The FWF controls and wiring are done too. All of the CHT/EGT/PSI probes even worked the first time!
Anyway, just thought I'd share. Cowling goes on next, then the baffling... Wish me luck. 
Matt Dralle
RV-8 #82880 N998RV
http://www.mykitlog.com/dralle
Cowling and Baffling...
| | - The Matronics RV8-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?RV8-List |
|
| Description: |
|
| Filesize: |
208.51 KB |
| Viewed: |
2509 Time(s) |
|
| Description: |
|
| Filesize: |
181.06 KB |
| Viewed: |
2509 Time(s) |
|
| Description: |
|
| Filesize: |
179.19 KB |
| Viewed: |
2509 Time(s) |
|
| Description: |
|
| Filesize: |
232.45 KB |
| Viewed: |
2509 Time(s) |
|
| Description: |
|
| Filesize: |
212.28 KB |
| Viewed: |
2509 Time(s) |
|
_________________
Matt Dralle
Matronics Email List Administrator |
|
| Back to top |
|
 |
rveighta(at)comcast.net
Guest
|
| Posted: Sat Aug 29, 2009 5:27 pm Post subject: Hartzell Prop Goes On Today! |
|
|
Matt, what a beautiful lookin' 8! Makes me wish I hadn't sold my 8 last fall. I had the same prop on mine. If you think
it looks good, just wait until you taxi out the first time! I still remember taking mine out the first time on a warm, summer
evening, with the canopy slightly ajar and those big paddle blades playing a symphony for me. Heavenly....
Walt Shipley
---
| | - The Matronics RV8-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?RV8-List |
|
|
|
| Back to top |
|
|
tcone1(at)comcast.net
Guest
|
| Posted: Sat Aug 29, 2009 5:36 pm Post subject: Hartzell Prop Goes On Today! |
|
|
One thing to consider. With the prop on, you are likely to rotate the
engine, even very small displacements defeats some of the preservation. Not
a huge deal, depending upon conditions, but I held off as long as possible
before mounting mine.
do not archive
---
| | - The Matronics RV8-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?RV8-List |
|
|
|
| Back to top |
|
|
Matt Dralle
Site Admin
Joined: 08 Nov 2005
Posts: 26321
Location: Livermore CA USA
|
| Posted: Sun Aug 30, 2009 8:36 am Post subject: Hartzell Prop Goes On Today! |
|
|
That is an important consideration. To mount the cowlings, though, you have to have the spinner on. With a CS prop, the spinner mounts directly to the prop and not the crankshaft so you have to mount the prop to the engine to get the spinner in the right place.
Now I've just got all that much more incentive to get it in the air!
Matt Dralle
RV-8 #82880 N998RV
http://www.mykitlog.com/dralle
Cowling and Baffling...
At 06:29 PM 8/29/2009 Saturday, you wrote:
[quote]
One thing to consider. With the prop on, you are likely to rotate the engine, even very small displacements defeats some of the preservation. Not a huge deal, depending upon conditions, but I held off as long as possible before mounting mine.
---
| | - The Matronics RV8-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?RV8-List |
|
_________________
Matt Dralle
Matronics Email List Administrator |
|
| Back to top |
|
|
tcone1(at)comcast.net
Guest
|
| Posted: Sun Aug 30, 2009 9:26 am Post subject: Hartzell Prop Goes On Today! |
|
|
Matt,
I've seen others who made a backing plate mockup out of pvc and plywood. I
didn't go to that extreme, I just was very careful while massaging the cowl,
and then immediately removed the prop when the cowl fitting was complete
because visitors to the shop, for some reason just can't resist the
temptation to wiggle the prop.
Tim
---
| | - The Matronics RV8-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?RV8-List |
|
|
|
| Back to top |
|
|
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum
|
Powered by phpBB © 2001, 2005 phpBB Group
|
Get Email Distribution Too!
FAQ
Search
Memberlist
Usergroups
Register
Profile
Log in to check your private messages
Log in
