  | 
				Matronics Email Lists Web Forum Interface to the Matronics Email Lists   
				 | 
			 
		 
		 
	
		| View previous topic :: View next topic   | 
	 
	
	
		| Author | 
		Message | 
	 
	
		Benjamin Q
 
 
  Joined: 04 Mar 2009 Posts: 13 Location: Twentynine Palms, CA
  | 
		
			
				 Posted: Sun Oct 11, 2009 9:41 pm    Post subject: Which radios work best with the 2200? | 
				     | 
			 
			
				
  | 
			 
			
				When I attended the engine conference, it was mentioned that some radios just don't work well with the jabiru.  I can't remember exactly what caused the interference.  
    I am about a month away from needing to make a hard decision on which radio to use in my Zenith 701 and for a lot of reasons I am really interested in the MGL V10.  I do remember someone saying that the Garmin radios seem to work well with the Jabiru, but I hate to be boxed into only having once choice.
    What is everybodies' experiance with radios and the Jabiru engine? Can anyone vouch for certian brands or models?  Also, does anyone know if there are corrective measures that can be made to take care of the interference?
    Any advise would be appreciated.
 
  |  | - The Matronics JabiruEngine-List Email Forum - |  |   |  Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
 
  http://www.matronics.com/Navigator?JabiruEngine-List |  
  |  
 
 
 
 
  | 
			 
		  | 
	 
	
		| Back to top | 
		 | 
	 
	
		  | 
	 
	
		ianwilson2
 
 
  Joined: 06 Jan 2008 Posts: 33 Location: France
  | 
		
			
				 Posted: Mon Oct 12, 2009 12:06 am    Post subject: Re: Which radios work best with the 2200? | 
				     | 
			 
			
				
  | 
			 
			
				Hi Ben,
 
 I have a 2200A and a MicroAir M760 in my X-Air Hawk and don't have any problems.  I chose the M760 because it's (relatively) cheap and also doesn't take up much panel space.  As they also make them near the Jab factory in Aus, they should be compatible!
 
 My best advice on interference is to use a single ground location for all of the electrical stuff on the plane and then connect the batt -tive and the engine crankcase to it as well.  I've done this and don't have any interference problems from the engine, strobes etc.
 
 Hope this helps.
 
 Ian
 
  |  | - The Matronics JabiruEngine-List Email Forum - |  |   |  Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
 
  http://www.matronics.com/Navigator?JabiruEngine-List |  
  |  
 
 
 
 
  | 
			 
		  | 
	 
	
		| Back to top | 
		 | 
	 
	
		  | 
	 
	
		jacksbird(at)charter.net Guest
 
 
 
 
 
  | 
		
			
				 Posted: Mon Oct 12, 2009 5:24 pm    Post subject: Which radios work best with the 2200? | 
				     | 
			 
			
				
  | 
			 
			
				Hi,
 I'm new to the list. Finished my project this summer and have 21hours on the 
 engine.
 I have a Jab 2200A on  Kolb Mark III Xtra with a ICOM IC A200 panel mount 
 and a CI-122 VHF COM antenna. It is perfect up to 1250 RPM. Aproaching 
 2000RPM radio noise in the head set becomes intolerable and transmissim 
 impossible. Cockpit noise is a contributor but not the primary cause. Have 
 had several knowledgeable friends evaluate the problem . Their advice is buy 
 a different radio.
 John
 jacksbird(at)charter,net
 ---
 
  |  | - The Matronics JabiruEngine-List Email Forum - |  |   |  Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
 
  http://www.matronics.com/Navigator?JabiruEngine-List |  
  |  
 
 
 
 
  | 
			 
		  | 
	 
	
		| Back to top | 
		 | 
	 
	
		  | 
	 
	
		plus2s
 
 
  Joined: 30 Nov 2006 Posts: 65 Location: NEW ZEALAND
  | 
		
			
				 Posted: Mon Oct 12, 2009 6:41 pm    Post subject: Which radios work best with the 2200? | 
				     | 
			 
			
				
  | 
			 
			
				Hi John
   
  We have a Jabiru J160 with the same radio and it works fine. We also have a Pioneer 200 with a Xcom radio and had a similar problem to you. After trying many different options we replaced the voltage regulator with a Powermate regulator and now have great transmission and reception that is noise free. www.powermate.com.au   (no connection etc)
   
  Regards
  Keith
 
 --- On Tue, 13/10/09, John Abbott <jacksbird(at)charter.net> wrote:
 
   	  | Quote: | 	 		  
 From: John Abbott <jacksbird(at)charter.net>
 Subject: Re: Which radios work best with the 2200?
 To: jabiruengine-list(at)matronics.com
 Received: Tuesday, 13 October, 2009, 2:23 PM
 
  --> JabiruEngine-List message posted by: "John Abbott" <jacksbird(at)charter.net (jacksbird(at)charter.net)>
 
 Hi,
 I'm new to the list. Finished my project this summer and have 21hours on the engine.
 I have a Jab 2200A on  Kolb Mark III Xtra with a ICOM IC A200 panel mount and a CI-122 VHF COM antenna. It is perfect up to 1250 RPM. Aproaching 2000RPM radio noise in the head set becomes intolerable and transmissim impossible. Cockpit noise is a contributor but not the primary cause. Have had several knowledgeable friends evaluate the problem . Their advice is buy a different radio.
 John
 jacksbird(at)charter,net
 
  | 	    [quote][b]
 
  |  | - The Matronics JabiruEngine-List Email Forum - |  |   |  Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
 
  http://www.matronics.com/Navigator?JabiruEngine-List |  
  |  
 
 
 
 
  | 
			 
		  | 
	 
	
		| Back to top | 
		 | 
	 
	
		  | 
	 
	
		Thom Riddle
 
  
  Joined: 10 Jan 2006 Posts: 1597 Location: Buffalo, NY, USA (9G0)
  | 
		
			
				 Posted: Tue Oct 13, 2009 5:11 am    Post subject: Re: Which radios work best with the 2200? | 
				     | 
			 
			
				
  | 
			 
			
				John,
 
 Unless your iCom A200 is broken, your problem is not the radio. I had the same radio in an Allegro 2000 and it was the best quality transmission and reception I've ever had. Of course the cockpit of the Allegro was pretty quiet compared to a Kolb.
 
 I now fly a Kolb Slingshot w/ Jabiru 2200A and use an iCom A6 handheld with antenna mounted on boom tube and get great reception. However, above about 2500 rpm, the cockpit noise makes it difficult to hear, so when I need to use the radio I just slow down a bit. Kolbs are very noisy but it sounds like your problem is not related to the noisy environment but electrical interference of some sort.
 
  |  | - The Matronics JabiruEngine-List Email Forum - |  |   |  Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
 
  http://www.matronics.com/Navigator?JabiruEngine-List |  
  |  
 
 
 
 
  _________________ Thom Riddle
 
Buffalo, NY (9G0)
 
 
 
 
Don't worry about old age... it doesn't last very long. 
 
- Anonymous | 
			 
		  | 
	 
	
		| Back to top | 
		 | 
	 
	
		  | 
	 
	
		Lynn Matteson
 
 
  Joined: 10 Jan 2006 Posts: 2778 Location: Grass Lake, Michigan
  | 
		
			
				 Posted: Tue Oct 13, 2009 5:34 am    Post subject: Which radios work best with the 2200? | 
				     | 
			 
			
				
  | 
			 
			
				No noise here, also using an ICOM A200 panel mount radio.
 
 Lynn Matteson
 Kitfox IV Speedster, taildragger
 Jabiru 2200, #2062, 793.2 hrs
 Countdown to 1000 hrs~207 to go
 Sensenich 62"x46" Wood prop
 Electroair direct-fire ignition system
 Rotec TBI-40 injection
 Status: flying
 On Oct 12, 2009, at 9:23 PM, John Abbott wrote:
 
 [quote] 
  <jacksbird(at)charter.net>
 
  Hi,
  I'm new to the list. Finished my project this summer and have  
  21hours on the engine.
  I have a Jab 2200A on  Kolb Mark III Xtra with a ICOM IC A200 panel  
  mount and a CI-122 VHF COM antenna. It is perfect up to 1250 RPM.  
  Aproaching 2000RPM radio noise in the head set becomes intolerable  
  and transmissim impossible. Cockpit noise is a contributor but not  
  the primary cause. Have had several knowledgeable friends evaluate  
  the problem . Their advice is buy a different radio.
  John
  jacksbird(at)charter,net
  ---
 
  |  | - The Matronics JabiruEngine-List Email Forum - |  |   |  Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
 
  http://www.matronics.com/Navigator?JabiruEngine-List |  
  |  
 
 
 
 
  _________________ Lynn
 
Kitfox IV-Jabiru 2200
 
N369LM | 
			 
		  | 
	 
	
		| Back to top | 
		 | 
	 
	
		  | 
	 
	
		 | 
	 
 
  
	 
	    
	   | 
	
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum You cannot attach files in this forum You can download files in this forum
  | 
   
 
  
Powered by phpBB © 2001, 2005 phpBB Group
  
		 |