Matronics Email Lists :: View topic - Question about AN Fittings

Matronics Email Lists
Web Forum Interface to the Matronics Email Lists

Get Email Distribution Too! FAQ Search Memberlist Usergroups Register

Profile Log in to check your private messages Log in

Question about AN Fittings

Matronics Email Lists Forum Index -> RV10-List

View previous topic :: View next topic

Author Message

kearney

Joined: 20 Sep 2008
Posts: 563

Posted: Mon Nov 09, 2009 5:17 pm Post subject: Question about AN Fittings

Hi  

   

I have some AN nipples that I want to install on a Matco parking brake. As these connections are not compression fittings, should I be using anything like Teflon tape on the joints?  

   

Inquiring minds need to know  

   

Les  

#40643 still in fibreglass hell but out on a day pass  

       [quote][b]

- The Matronics RV10-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?RV10-List

ricksked(at)embarqmail.co
Guest

Posted: Mon Nov 09, 2009 5:23 pm Post subject: Question about AN Fittings

Ooooooh. I wish I had AN nipples!!!  

Sent via BlackBerry by AT&TFrom:  "Les Kearney" <kearney(at)shaw.ca> 

Date: Mon, 9 Nov 2009 18:16:08 -0700

To: <rv10-list(at)matronics.com>

Subject: RV10-List: Question about AN Fittings

Hi  

I have some AN nipples that I want to install on a = Matco parking brake. As these connections are not compression fittings, should = I be using anything like Teflon tape on the = joints?  

Inquiring minds need to = know  

Les  

#40643 still in fibreglass hell but out on a day = pass  

       [quote][b]

- The Matronics RV10-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?RV10-List

msausen

Joined: 25 Oct 2007
Posts: 559
Location: Appleton, WI USA

Posted: Mon Nov 09, 2009 6:05 pm Post subject: Question about AN Fittings

I always knew Rick had some Freudian issuesâ€¦..  

   

Anyway, no Teflon tape.Â  Tapes are bad.Â  Use a good quality pipe dope (aka pipe thread sealant) that is fuel resistant.Â  You should be able to find something from your local NAPA type place.  

   

Michael  

       

From: owner-rv10-list-server(at)matronics.com [mailto:owner-rv10-list-server(at)matronics.com] On Behalf Of ricksked(at)embarqmail.com

 Sent: Monday, November 09, 2009 7:22 PM

 To: rv10-list(at)matronics.com

 Subject: Re: RV10-List: Question about AN Fittings  

  

  

   

Ooooooh. I wish I had AN nipples!!!   

Sent via BlackBerry by AT&T      

    

From: "Les Kearney" <kearney(at)shaw.ca>   

    

Date: Mon, 9 Nov 2009 18:16:08 -0700  

    

To: <rv10-list(at)matronics.com>  

    

Subject: RV10-List: Question about AN Fittings  

    

   

    

Hi  

   

I have some AN nipples that I want to install on a = Matco parking brake. As these connections are not compression fittings, should = I be using anything like Teflon tape on the = joints?  

   

Inquiring minds need to = know  

   

Les  

#40643 still in fibreglass hell but out on a day = pass  

   	  Quote: 	
		    _-=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D_-=3D_-=3DÂ Â Â Â Â Â  -- Please Support Your Lists This Month --_-=3DÂ Â Â Â Â Â Â Â Â Â  (And Get Some AWESOME FREE Gifts!)_-=3D_-=3DÂ Â  November is the Annual List Fund Raiser.Â  Click on_-=3DÂ Â  the Contribution link below to find out more about_-=3DÂ Â  this year's Terrific Free Incentive Gifts provided  	
0 	  Quote: 	
		    	
1 	  Quote: 	
		    	
2 	  Quote: 	
		    	
3 	  Quote: 	
		    	
4 	  Quote: 	
		    	
5 	  Quote: 	
		    	
6 	  Quote: 	
		    	
7 	  Quote: 	
		    	
8 	  Quote: 	
		    	
9 	  Quote: 	
		  _-=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D 	
0 	  Quote: 	
		  _-=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D 	
1 	  Quote: 	
		  _-=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D 	
2 	  Quote: 	
		  _-=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D 	
3 	  Quote: 	
		  _-=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D 	
4 	  Quote: 	
		  _-=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D 	
5 	  Quote: 	
		  _-=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D 	
6 	  Quote: 	
		  _-=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D 	
7 	  Quote: 	
		  _-=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D 	
8 	  Quote: 	
		  _-=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D 	
9 	  Quote: 	
		  _-=3D 	
0 	  Quote: 	
		  _-=3D 	
1 	  Quote: 	
		  _-=3D 	
2 	  Quote: 	
		  _-=3D 	
3 	  Quote: 	
		  _-=3D 	
4 	  Quote: 	
		  _-=3D 	
5 	  Quote: 	
		  _-=3D 	
6 	  Quote: 	
		  _-=3D 	
7 	  Quote: 	
		  _-=3D 	
8 	  Quote: 	
		  _-=3D 	
9  

kyÂ·Ã¨Å¾Ã›"ÃÃÅ“Â¢Z+Ã“M4Ã“GÃšqÃ§(ÂºÂ¸Å¾Â®wÂ°râ€¹Â«â€°ÃªÃâ€¢Ã¦Â¬y+Â©Â¦Å Ãbâ€¹Â«.+-Â±8bÂ°ÃŠ'Â¶'tgÂJâ€°Å¾a8ÃDAâ€°Ã»l6â€¹Ãžâ„¢Â·Â«Å Ã‹ax Ã§Â¹Â©KÅ Ã‹EÂºwQj+â€‘Â¬)brJ'Â¶â€šÂ¢{kâ€°Â»ÂÅ â€°Ã¥Å yzZ0Â¶â€¡Ã¢ÂÃš.Â¶j+yÂ¦Ã¨ÂºÃ›aÅ ÃŒÅ¾jÂ»zÂºÃ¢~'ÂÃ§Ë†ÂÃ‡Â§Â¶+Ãž'ÃÂ²Å¡Ã¨Â¾'^uÂ¼â‚¬zÂº    â€¢Ã§-Â®'â€ Â·Å¸â€ Ã›iÃ¿Ã¼0ÃÂ§Â«Â¡Ã©^rÃšÃ¢qÃŠ&Ãƒ zÂºâ€‘â€¢Ã§-Â®'Â¢oÃšNÂÂº)]zÂ»Â¢â€°,Â¶Å ÃžjÃž~mÂ§Ã¿Ã°ÃƒÃ®Å W^Â®Ã†Ã¨Â¢KÂ¢l0ÃÂ»Â¢â€¢Ã—Â«Â±Âº(â€™Ã‡(â€ºÃ¶â€¡Â¢gâ€ºÂº)mBÃjÃž~mÂ§Ã¿Ã°Ãƒhâ„¢Ã¦Ã®Å [azZ\Â¢l0Ã‚&yÂ»Â¢â€“Ã˜^â€“â€”(â€ºÃ¶â€¹Å Ã‹BÂ¢{kâ€°Â»ÂÅ â€°Ã–yÂ´Â¢ÂµÃ¦Â¡ÂÃ§Ã¡Â¶ÃšÃ¿ 0â„¢Â«kÂ¢xÅ“Â±ÃŠ&Ã½ÃŠ'Â¶Â¸â€ºÂºÃ˜Â¨Å¾mÂ§Ã¿Ã°Ãƒ Å¡Â¶Âº'â€°Ã‹Â¢oÃœÂ¢{kâ€°Â»ÂÅ â€°Ã¿i8ZÅ¾LÂ¨Â¹Ãº+ÃŠâ€¹Â«ÂÃ©ÃžÂ®â€¹Â¬Â²ÃªiÂ¢Â»LjÃ›CÂÂ©exÂ¸Â¬Â´fÅ tÃ¡yuÃÂ¸Â¬Â´IÅ¡Å QhÂ®Ã©â€Â±Ã«axÃ†ÂÂ®â€°Ã¢rÃ‚Ã¢Â²Ã‘^jÃ›Â«zÃƒZÂ¾(Â¶Å ÃÂ¡ÂºÃ¨Ã‚Ã‡Ââ€¦Ã©Å¡Å¸"Ã¢Â²Ã›ÂÅ XÂâ€°Ã«,Â¹ÃˆZÂ°Â¸Â¬ÂµIÃ¿JÃ¦Ã¬rÂ¸Â©Â¶*'[1]Â·!Å Ã·â€™yÂªÃœâ€ž:0Å¾ZwÂ°ÃšÃˆÃ¨Ã‚Ã‡â€šâ€¦Â«E    Ã¡Â¢Ãš,â€¦ÂªÃžjwfÂ¹ÃˆfÂ¹ÃˆfÂ¢Â·Å¡â€ Â·Å¸â€ Ã›iÃ¿Ã¼0Ã‚fÂÂ®â€°Ã¢rÃ‡(â€ºÃ³ZÂ¾(Â¶Å Ã‘W]

 Å Ã‹aÂ¶ÃšÃ¿ 0â„¢Â«kÂ¢xÅ“Â±ÃŠ&Ã¼Ã–Â¯Å ÂÂ¢Â´UÃ—BÃ¢Â²ÃŸÃš0    Ã‘8Ã’[1]IaÃ¤T1$Å¡â„¢Ã¨+yÂ«\Â¢{^Å¾Ã–Â¥Â²â€ Â¯j)ZnWÂ¯â€°Â«aygâ€ºÅ Ã®Å¡Ã†Â¡ÂÃ§Ã¡Â¶ÃšÃ½Ãº+Âºk&jÃšÃ¨Å¾',râ€°Â¡Â¶ÃšÃ½Ãº+Âºk&jÃšÃ¨Å¾',râ€°Â¿kÃ¶Ã¿~â€°ÃÃ¾Å¡ÃžÃ½ÂºÃ‹Ã¸mÅ¡

- The Matronics RV10-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?RV10-List

rleffler

Joined: 05 Nov 2006
Posts: 680

Posted: Mon Nov 09, 2009 6:05 pm Post subject: Question about AN Fittings

No, don’t use Teflon.  Use fuel lube on the threads.  

   

bob  

       

From: owner-rv10-list-server(at)matronics.com [mailto:owner-rv10-list-server(at)matronics.com] On Behalf Of Les Kearney

 Sent: Monday, November 09, 2009 8:16 PM

 To: rv10-list(at)matronics.com

 Subject: Question about AN Fittings  

  

  

   

Hi  

   

I have some AN nipples that I want to install on a Matco parking brake. As these connections are not compression fittings, should I be using anything like Teflon tape on the joints?  

   

Inquiring minds need to know  

   

Les  

#40643 still in fibreglass hell but out on a day pass   	  Quote: 	
		    www.aeroelectric.com 	
0 	  Quote: 	
		   	
1 	  Quote: 	
		   	
2 	  Quote: 	
		   	
3 	  Quote: 	
		   	
4 	  Quote: 	
		   	
5 	  Quote: 	
		   	
6 	  Quote: 	
		   	
7 	  Quote: 	
		   	
8 	  Quote: 	
		   	
9 	  Quote: 	
		  	
0 	  Quote: 	
		  	
1 	  Quote: 	
		  	
2 	  Quote: 	
		  	
3 	  Quote: 	
		  	
4 	  Quote: 	
		  	
5 	  Quote: 	
		  	
6 	  Quote: 	
		  	
7 	  Quote: 	
		  	
8

       [quote][b]

- The Matronics RV10-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?RV10-List

_________________
Bob Leffler
N410BL - Phase I
http://mykitlog.com/rleffler

dlm46007(at)cox.net
Guest

Posted: Mon Nov 09, 2009 6:13 pm Post subject: Question about AN Fittings

I have used either Teflon tape or fuel lube on the pipe  threads. On the flared fittings nothing required. B nut compression of the flare  is sufficient

   From: owner-rv10-list-server(at)matronics.com  [mailto:owner-rv10-list-server(at)matronics.com] On Behalf Of Les  Kearney

Sent: Monday, November 09, 2009 6:16 PM

To:  rv10-list(at)matronics.com

Subject: Question about AN  Fittings

Hi 

I have some AN nipples that I want  to install on a Matco parking brake. As these connections are not compression  fittings, should I be using anything like Teflon tape on the  joints? 

Inquiring minds need to  know 

Les 

#40643 still in fibreglass hell but  out on a day pass

[quote]

href="http://www.aeroelectric.com">www.aeroelectric.com

href="http://www.buildersbooks.com">www.buildersbooks.com

href="http://www.homebuilthelp.com">www.homebuilthelp.com

href="http://www.matronics.com/contribution">http://www.matronics.com/chref="http://www.matronics.com/Navigator?RV10-List">http://www.matronics.com/Navigator?RV10-List

href="http://forums.matronics.com">http://forums.matronics.com

[b]

- The Matronics RV10-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?RV10-List

n8zg(at)mchsi.com
Guest

Posted: Mon Nov 09, 2009 6:58 pm Post subject: Question about AN Fittings

Now THERE’S a mental picture I didn’t need…  

   

=======================  

   

From: owner-rv10-list-server(at)matronics.com [mailto:owner-rv10-list-server(at)matronics.com] On Behalf Of ricksked(at)embarqmail.com

 

   

Ooooooh. I wish I had AN nipples!!!   

        [quote][b]

- The Matronics RV10-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?RV10-List

Phil.Perry(at)netapp.com
Guest

Posted: Mon Nov 09, 2009 7:13 pm Post subject: Question about AN Fittings

Iâ€™ve seen hardware attached to nipples before, but I canâ€™t say Iâ€™ve ever seen AN fittings.  

   

   

       

From: ricksked(at)embarqmail.com [mailto:ricksked(at)embarqmail.com] 

 Sent: Monday, November 09, 2009 7:22 PM

 To: rv10-list(at)matronics.com

 Subject: Re: RV10-List: Question about AN Fittings  

  

  

   

Ooooooh. I wish I had AN nipples!!!   

Sent via BlackBerry by AT&T      

    

From: "Les Kearney" <kearney(at)shaw.ca>   

    

Date: Mon, 9 Nov 2009 18:16:08 -0700  

    

To: <rv10-list(at)matronics.com>  

    

Subject: RV10-List: Question about AN Fittings  

    

   

    

Hi  

   

I have some AN nipples that I want to install on a = Matco parking brake. As these connections are not compression fittings, should = I be using anything like Teflon tape on the = joints?  

   

Inquiring minds need to = know  

   

Les  

#40643 still in fibreglass hell but out on a day = pass  

   	  Quote: 	
		    _-=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D_-=3D_-=3DÂ Â Â Â Â Â  -- Please Support Your Lists This Month --_-=3DÂ Â Â Â Â Â  Â Â Â Â (And Get Some AWESOME FREE Gifts!)_-=3D_-=3DÂ Â  November is the Annual List Fund Raiser.Â  Click on_-=3DÂ Â  the Contribution link below to find out more about_-=3DÂ Â  this year's Terrific Free Incentive Gifts provided  	
0 	  Quote: 	
		    	
1 	  Quote: 	
		    	
2 	  Quote: 	
		    	
3 	  Quote: 	
		    	
4 	  Quote: 	
		    	
5 	  Quote: 	
		    	
6 	  Quote: 	
		    	
7 	  Quote: 	
		    	
8 	  Quote: 	
		    	
9 	  Quote: 	
		  _-=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D 	
0 	  Quote: 	
		  _-=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D 	
1 	  Quote: 	
		  _-=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D 	
2 	  Quote: 	
		  _-=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D 	
3 	  Quote: 	
		  _-=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D 	
4 	  Quote: 	
		  _-=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D 	
5 	  Quote: 	
		  _-=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D 	
6 	  Quote: 	
		  _-=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D 	
7 	  Quote: 	
		  _-=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D 	
8 	  Quote: 	
		  _-=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D 	
9 	  Quote: 	
		  _-=3D 	
0 	  Quote: 	
		  _-=3D 	
1 	  Quote: 	
		  _-=3D 	
2 	  Quote: 	
		  _-=3D 	
3 	  Quote: 	
		  _-=3D 	
4 	  Quote: 	
		  _-=3D 	
5 	  Quote: 	
		  _-=3D 	
6 	  Quote: 	
		  _-=3D 	
7 	  Quote: 	
		  _-=3D 	
8 	  Quote: 	
		  _-=3D 	
9  

Â¦~Â²    NW]Å Ã‹â„¢Â¨Å Ëœz1Â¢Â°Â´Â¶Â°Å Â¢n    Ã¶Ã¿~â€°ÃÃ¾Å¡ÃžÃ½ÂºÃ‹Ã¸m

- The Matronics RV10-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?RV10-List

n223rv(at)wolflakeairport
Guest

Posted: Mon Nov 09, 2009 8:04 pm Post subject: Question about AN Fittings

He said AN nipples, not MAN nipples 

Do not archive



Sent from my iPhone



On Nov 9, 2009, at 8:21 PM, ricksked(at)embarqmail.com (ricksked(at)embarqmail.com) wrote:



[quote]Ooooooh. I wish I had AN nipples!!!  

Sent via BlackBerry by AT&TFrom:  "Les Kearney" <kearney(at)shaw.ca (kearney(at)shaw.ca)> 

Date: Mon, 9 Nov 2009 18:16:08 -0700

To: <rv10-list(at)matronics.com (rv10-list(at)matronics.com)>

Subject: Question about AN Fittings

    

Hi  

   

I have some AN nipples that I want to install on a = Matco parking brake. As these connections are not compression fittings, should = I be using anything like Teflon tape on the = joints?  

   

Inquiring minds need to = know  

   

Les  

#40643 still in fibreglass hell but out on a day = pass  

        	  Quote: 	
		  

	
 

[b]

- The Matronics RV10-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?RV10-List

carl.froehlich(at)verizon
Guest

Posted: Mon Nov 09, 2009 9:51 pm Post subject: Question about AN Fittings

I found the Tite Seal product to be excellent for pipe threads and for gaskets.Â  Here is the Aircraft Spruce link for the product: http://www.aircraftspruce.com/catalog/eppages/titesealit.php  

   

Carl Froehlich  

RV-8A (500 hrs)  

RV-10 (putting stuff in the fuselage)  

       

From: owner-rv10-list-server(at)matronics.com [mailto:owner-rv10-list-server(at)matronics.com] On Behalf Of RV Builder (Michael Sausen)

 Sent: Monday, November 09, 2009 9:04 PM

 To: rv10-list(at)matronics.com

 Subject: RE: Question about AN Fittings  

  

  

   

I always knew Rick had some Freudian issuesâ€¦..  

   

Anyway, no Teflon tape.  Tapes are bad.  Use a good quality pipe dope (aka pipe thread sealant) that is fuel resistant.  You should be able to find something from your local NAPA type place.  

   

Michael  

       

From: owner-rv10-list-server(at)matronics.com [mailto:owner-rv10-list-server(at)matronics.com] On Behalf Of ricksked(at)embarqmail.com

 Sent: Monday, November 09, 2009 7:22 PM

 To: rv10-list(at)matronics.com

 Subject: Re: Question about AN Fittings  

  

  

   

Ooooooh. I wish I had AN nipples!!!   

Sent via BlackBerry by AT&T      

    

From: "Les Kearney" <kearney(at)shaw.ca>   

    

Date: Mon, 9 Nov 2009 18:16:08 -0700  

    

To: <rv10-list(at)matronics.com>  

    

Subject: Question about AN Fittings  

    

   

    

Hi  

   

I have some AN nipples that I want to install on a = Matco parking brake. As these connections are not compression fittings, should = I be using anything like Teflon tape on the = joints?  

   

Inquiring minds need to = know  

   

Les  

#40643 still in fibreglass hell but out on a day = pass  

   	  Quote: 	
		    www.aeroelectric.com 	
0 	  Quote: 	
		   	
1 	  Quote: 	
		   	
2 	  Quote: 	
		   	
3 	  Quote: 	
		   	
4 	  Quote: 	
		   	
5 	  Quote: 	
		   	
6 	  Quote: 	
		   	
7 	  Quote: 	
		   	
8 	  Quote: 	
		   	
9 	  Quote: 	
		  	
0 	  Quote: 	
		  	
1 	  Quote: 	
		  	
2 	  Quote: 	
		  	
3 	  Quote: 	
		  	
4 	  Quote: 	
		  	
5 	  Quote: 	
		  	
6 	  Quote: 	
		  	
7 	  Quote: 	
		  	
8  

kyÂ·Ã¨Å¾Ã›"ÃÃÅ“Â¢Z+Ã“M4Ã“GÃšqÃ§(ÂºÂ¸Å¾Â®wÂ°râ€¹Â«â€°ÃªÃâ€¢Ã¦Â¬y+Â©Â¦Å Ãbâ€¹Â«.+-Â±8bÂ°ÃŠ'Â¶'tgÂJâ€°Å¾a8ÃDAâ€°Ã»l6â€¹Ãžâ„¢Â·Â«Å Ã‹ax Ã§Â¹Â©KÅ Ã‹EÂºwQj+â€‘Â¬)brJ'Â¶â€šÂ¢{kâ€°Â»ÂÅ â€°Ã¥Å yzZ0Â¶â€¡Ã¢ÂÃš.Â¶j+yÂ¦Ã¨ÂºÃ›aÅ ÃŒÅ¾jÂ»zÂºÃ¢~'ÂÃ§Ë†ÂÃ‡Â§Â¶+Ãž'ÃÂ²Å¡Ã¨Â¾'^uÂ¼â‚¬zÂº       

  

â€¢Ã§-Â®'â€ Â·Å¸â€ Ã›iÃ¿Ã¼0ÃÂ§Â«Â¡Ã©^rÃšÃ¢qÃŠ&Ãƒ zÂºâ€‘â€¢Ã§-Â®'Â¢oÃšNÂÂº)]zÂ»Â¢â€°,Â¶Å ÃžjÃž~mÂ§Ã¿Ã°ÃƒÃ®Å W^Â®Ã†Ã¨Â¢KÂ¢l0ÃÂ»Â¢â€¢Ã—Â«Â±Âº(â€™Ã‡(â€ºÃ¶â€¡Â¢gâ€ºÂº)mBÃjÃž~mÂ§Ã¿Ã°Ãƒhâ„¢Ã¦Ã®Å [azZ\Â¢l0Ã‚&yÂ»Â¢â€“Ã˜^â€“â€”(â€ºÃ¶â€¹Å Ã‹BÂ¢{kâ€°Â»ÂÅ â€°Ã–yÂ´Â¢ÂµÃ¦Â¡ÂÃ§Ã¡Â¶ÃšÃ¿ 0â„¢Â«kÂ¢xÅ“Â±ÃŠ&Ã½ÃŠ'Â¶Â¸â€ºÂºÃ˜Â¨Å¾mÂ§Ã¿Ã°Ãƒ Å¡Â¶Âº'â€°Ã‹Â¢oÃœÂ¢{kâ€°Â»ÂÅ â€°Ã¿i8ZÅ¾LÂ¨Â¹Ãº+ÃŠâ€¹Â«ÂÃ©ÃžÂ®â€¹Â¬Â²ÃªiÂ¢Â»LjÃ›CÂÂ©exÂ¸Â¬Â´fÅ tÃ¡yuÃÂ¸Â¬Â´IÅ¡Å QhÂ®Ã©â€Â±Ã«axÃ†ÂÂ®â€°Ã¢rÃ‚Ã¢Â²Ã‘^jÃ›Â«zÃƒZÂ¾(Â¶Å ÃÂ¡ÂºÃ¨Ã‚Ã‡Ââ€¦Ã©Å¡Å¸"Ã¢Â²Ã›ÂÅ XÂâ€°Ã«,Â¹ÃˆZÂ°Â¸Â¬ÂµIÃ¿JÃ¦Ã¬rÂ¸Â©Â¶*'[1]Â·!Å Ã·â€™yÂªÃœâ€ž:0Å¾ZwÂ°ÃšÃˆÃ¨Ã‚Ã‡â€šâ€¦Â«E       

  

Ã¡Â¢Ãš,â€¦ÂªÃžjwfÂ¹ÃˆfÂ¹ÃˆfÂ¢Â·Å¡â€ Â·Å¸â€ Ã›iÃ¿Ã¼0Ã‚fÂÂ®â€°Ã¢rÃ‡(â€ºÃ³ZÂ¾(Â¶Å Ã‘W]

 Å Ã‹aÂ¶ÃšÃ¿ 0â„¢Â«kÂ¢xÅ“Â±ÃŠ&Ã¼Ã–Â¯Å ÂÂ¢Â´UÃ—BÃ¢Â²ÃŸÃš0       

  

Ã‘8Ã’[1]IaÃ¤T1$Å¡â„¢Ã¨+yÂ«\Â¢{^Å¾Ã–Â¥Â²â€ Â¯j)ZnWÂ¯â€°Â«aygâ€ºÅ Ã®Å¡Ã†Â¡ÂÃ§Ã¡Â¶ÃšÃ½Ãº+Âºk&jÃšÃ¨Å¾',râ€°Â¡Â¶ÃšÃ½Ãº+Âºk&jÃšÃ¨Å¾',râ€°Â¿kÃ¶Ã¿~â€°ÃÃ¾Å¡ÃžÃ½ÂºÃ‹Ã¸mÅ¡  

~,    gÓ“  

        [quote][b]

- The Matronics RV10-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?RV10-List

Display posts from previous:

	Matronics Email Lists Forum Index -> RV10-List	All times are GMT - 8 Hours
Page 1 of 1

Jump to:

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum