Matronics Email Lists Forum Index Matronics Email Lists
Web Forum Interface to the Matronics Email Lists
 
 Get Email Distribution Too!Get Email Distribution Too!    FAQFAQ   SearchSearch   MemberlistMemberlist   UsergroupsUsergroups   RegisterRegister 
 ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 

LED as LV Annunciator

 
Post new topic   Reply to topic    Matronics Email Lists Forum Index -> AeroElectric-List
View previous topic :: View next topic  
Author Message
jonlaury



Joined: 06 Nov 2006
Posts: 336

PostPosted: Sun Sep 05, 2010 7:42 am    Post subject: LED as LV Annunciator Reply with quote

I want to use an LED as a LV annunciator.

But from the products that AEC lists for driving LED's and what they do, I gather that using LED's over incandescent lamps can cause noise problems.

Does using a couple of LED's with the appropriate resistor create noise antagonists?


- The Matronics AeroElectric-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?AeroElectric-List
Back to top
View user's profile Send private message
nuckolls.bob(at)aeroelect
Guest





PostPosted: Sun Sep 05, 2010 9:39 am    Post subject: LED as LV Annunciator Reply with quote

At 10:42 AM 9/5/2010, you wrote:
Quote:
--> AeroElectric-List message posted by: "jonlaury" <jonlaury(at)impulse.net>

I want to use an LED as a LV annunciator.

But from the products that AEC lists for driving LED's and what they do, I gather that using LED's over incandescent lamps can cause noise problems.

You must be reading the information published
concerning noise issues on POWER SUPPLIES used
to excite high intensity arrays of LEDs.

[img]cid:7.1.0.9.0.20100905122859.01ec16d0(at)aeroelectric.com.0[/img]
In this case, it's the electronics that becomes a
potential antagonist for sensitive victims. It was
a potential cum reality that prompted a re-packaging
of the LuxDrive power supplies on a filter board
as shown above.

Quote:
Does using a couple of LED's with the appropriate resistor create noise antagonists?

The LED is probably 10x noisier than other diodes . . .
but take that with a grain of salt. Virtually ALL electronic
devices passing current generate some noise. But
in the case of diodes, resistors and such, the amount
of is so tiny as to require special receivers
just to go find it . . . the garden variety
instrumentation system wont know it's there.

So install as many LEDs and companion resistors
as needed to meet your design goals. Noise potential
has no practical significance.


Bob . . .


- The Matronics AeroElectric-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?AeroElectric-List



1eb795b2.jpg
 Description:
 Filesize:  95.14 KB
 Viewed:  2789 Time(s)

1eb795b2.jpg


Back to top
jonlaury



Joined: 06 Nov 2006
Posts: 336

PostPosted: Sun Sep 05, 2010 12:16 pm    Post subject: Re: LED as LV Annunciator Reply with quote

Bob,
Thank you for that illumination. (I couldn't resist;-) Ohmy God! This is getting revolting! I seem stuck here no matter watt I do.

John

Do not archive


- The Matronics AeroElectric-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?AeroElectric-List
Back to top
View user's profile Send private message
nuckolls.bob(at)aeroelect
Guest





PostPosted: Sun Sep 05, 2010 12:26 pm    Post subject: LED as LV Annunciator Reply with quote

At 03:16 PM 9/5/2010, you wrote:
Quote:


Bob,
Thank you for that illumination. (I couldn't resist;-) Ohmy God!
This is getting revolting! I seem stuck here no matter watt I do.

Better to be "stuck" in the light as opposed to
wandering in the dark. We all started from right
where you are now.
Bob . . .


- The Matronics AeroElectric-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?AeroElectric-List
Back to top
Display posts from previous:   
Post new topic   Reply to topic    Matronics Email Lists Forum Index -> AeroElectric-List All times are GMT - 8 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum


Powered by phpBB © 2001, 2005 phpBB Group