Matronics Email Lists :: View topic - Seat rail alignment issue

Matronics Email Lists
Web Forum Interface to the Matronics Email Lists

Get Email Distribution Too! FAQ Search Memberlist Usergroups Register

Profile Log in to check your private messages Log in

Seat rail alignment issue

Matronics Email Lists Forum Index -> RV10-List

View previous topic :: View next topic

Author Message

rv10rob(at)gmail.com
Guest

Posted: Sun Nov 07, 2010 9:49 am Post subject: Seat rail alignment issue

Hi, all... I'm installing the seat rails now, and I have a fit problem.  I bolted the outboard mid rail support to the landing gear weldment (that was fun), but the holes for the rail aren't lining up with the seat floor.  The seat floor and rails agree, but the mid rail support doesn't.  Pic attached (left side of the picture is forward).  The right seat is pictured, but It's pretty much the same on the left side.  Anyone run into this issue?

   

 Thanks...

  

 -Rob

-- 

Rob Kochman

RV-10 "Finishing" Kit

Woodinville, WA (near Seattle)

http://kochman.net/N819K

- The Matronics RV10-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?RV10-List

DCP_1947.JPG

Description:

Filesize:

460.02 KB

Viewed:

1115 Time(s)

rleffler

Joined: 05 Nov 2006
Posts: 680

Posted: Sun Nov 07, 2010 1:49 pm Post subject: Seat rail alignment issue

I’m sure you’ve already thought of this, but I when I run into this situation, it’s usually because I’ve orientated the piece incorrectly.  i.e. upside down or left swapped with right.

From: owner-rv10-list-server(at)matronics.com [mailto:owner-rv10-list-server(at)matronics.com] On Behalf Of Rob Kochman

Sent: Sunday, November 07, 2010 12:40 PM

To: rv10-list

Subject: Seat rail alignment issue

Hi, all... I'm installing the seat rails now, and I have a fit problem.  I bolted the outboard mid rail support to the landing gear weldment (that was fun), but the holes for the rail aren't lining up with the seat floor.  The seat floor and rails agree, but the mid rail support doesn't.  Pic attached (left side of the picture is forward).  The right seat is pictured, but It's pretty much the same on the left side.  Anyone run into this issue?

Thanks...

-Rob

-- 

Rob Kochman

RV-10 "Finishing" Kit

Woodinville, WA (near Seattle)

http://kochman.net/N819K

  [quote][b]

- The Matronics RV10-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?RV10-List

_________________
Bob Leffler
N410BL - Phase I
http://mykitlog.com/rleffler

rv10rob(at)gmail.com
Guest

Posted: Mon Nov 08, 2010 10:37 pm Post subject: Seat rail alignment issue

Thanks, Bob... I looked around for something I might have done wrong, but there's not too much complicated around there, and the left and the right ones are the same.  For anyone else who may run into this, I called Van's, and they said it would be acceptable to "slot" the holes in the seat rail support, where it attaches to the gear weldment, so that's what I did, and all's well.

   

 Thanks...

  

 -Rob

 On Sun, Nov 7, 2010 at 1:43 PM, Bob Leffler <rv(at)thelefflers.com (rv(at)thelefflers.com)> wrote:

  	  Quote: 	
		     

I’m sure you’ve already thought of this, but I when I run into this situation, it’s usually because I’ve orientated the piece incorrectly.  i.e. upside down or left swapped with right.  

  

From: owner-rv10-list-server(at)matronics.com (owner-rv10-list-server(at)matronics.com) [mailto:owner-rv10-list-server(at)matronics.com (owner-rv10-list-server(at)matronics.com)] On Behalf Of Rob Kochman

 Sent: Sunday, November 07, 2010 12:40 PM

To: rv10-list

Subject: Seat rail alignment issue  

  

   

Hi, all... I'm installing the seat rails now, and I have a fit problem.  I bolted the outboard mid rail support to the landing gear weldment (that was fun), but the holes for the rail aren't lining up with the seat floor.  The seat floor and rails agree, but the mid rail support doesn't.  Pic attached (left side of the picture is forward).  The right seat is pictured, but It's pretty much the same on the left side.  Anyone run into this issue? 

  

 

  

Thanks...

  

 

  

-Rob

-- 

Rob Kochman

RV-10 "Finishing" Kit

Woodinville, WA (near Seattle)

http://kochman.net/N819K

 

 	  Quote: 	
		  



"_blank">www.aeroelectric.com

.com/" target="_blank">www.buildersbooks.com

="_blank">www.homebuilthelp.com

_blank">http://www.matronics.com/contribution

get="_blank">http://www.matronics.com/Navigator?RV10-List

ttp://forums.matronics.com

	


	


-- 

Rob Kochman

RV-10 "Finishing" Kit

Woodinville, WA (near Seattle)

http://kochman.net/N819K

  [quote][b]

- The Matronics RV10-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?RV10-List

carl.froehlich(at)verizon
Guest

Posted: Tue Nov 09, 2010 3:54 am Post subject: Seat rail alignment issue

I think the left and right seat plates are not identical.



Carl



Sent from my mobile phone.   Please read past the typos.

-----Original message-----

[quote]From: Rob Kochman <rv10rob(at)gmail.com>

To: rv10-list(at)matronics.com

Sent: Tue, Nov 9, 2010 06:30:55 GMT+00:00

Subject: Re: RV10-List: Seat rail alignment issue

Thanks, Bob... I looked around for something I might have done wrong, but there's not too much complicated around there, and the left and the right ones are the same.Â  For anyone else who may run into this, I called Van's, and they said it would be acceptable to "slot" the holes in the seat rail support, where it attachesÂ to the gear weldment, so that's what I did, and all's well.

  Â 

 Thanks...

 Â 

 -Rob

 On Sun, Nov 7, 2010 at 1:43 PM, Bob Leffler <rv(at)thelefflers.com (rv(at)thelefflers.com)> wrote:

  	  Quote: 	
		     

Iâ€™m sure youâ€™ve already thought of this, but I when I run into this situation, itâ€™s usually because Iâ€™ve orientated the piece incorrectly.Â  i.e. upside down or left swapped with right.  

Â  

From: owner-rv10-list-server(at)matronics.com (owner-rv10-list-server(at)matronics.com) [mailto:owner-rv10-list-server(at)matronics.com (owner-rv10-list-server(at)matronics.com)] On Behalf Of Rob Kochman

 Sent: Sunday, November 07, 2010 12:40 PM

To: rv10-list

Subject: RV10-List: Seat rail alignment issue  

  

Â   

Hi, all... I'm installing the seat rails now, and I have a fit problem.Â  I bolted the outboard mid rail support to the landing gear weldment (that was fun), but the holes for the rail aren't lining up with the seat floor.Â  The seat floor and rails agree, but the mid rail support doesn't.Â  Pic attached (left side of the picture is forward).Â  The right seat is pictured, but It's pretty much the same on the left side.Â  Anyone run into this issue? 

  

Â 

  

Thanks...

  

Â 

  

-Rob

-- 

Rob Kochman

RV-10 "Finishing" Kit

Woodinville, WA (near Seattle)

http://kochman.net/N819K

 

 	  Quote: 	
		  



"_blank">www.aeroelectric.com

.com/" target="_blank">www.buildersbooks.com

="_blank">www.homebuilthelp.com

_blank">http://www.matronics.com/contribution

get="_blank">http://www.matronics.com/Navigator?RV10-List

ttp://forums.matronics.com

	


	


-- 

Rob Kochman

RV-10 "Finishing" Kit

Woodinville, WA (near Seattle)

http://kochman.net/N819K

  [quote][b]

- The Matronics RV10-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?RV10-List

sean(at)stephensville.com
Guest

Posted: Tue Nov 09, 2010 5:46 am Post subject: Seat rail alignment issue

Just did the seat plates a few weeks ago.  They are not identical, but 

rather mirror images of one another.  It took me a while to figure out 

how they went together, but reading ahead in the plans and seeing how 

they are supposed to attach helped.



Check and make sure you made them mirror images as opposed to identical.



-Sean #40303



On 11/9/10 5:50 AM, carl.froehlich(at)verizon.net wrote:

 	  Quote: 	
		   I think the left and right seat plates are not identical.



 Carl



 Sent from my mobile phone.   Please read past the typos.

 -----Original message-----



     *From: *Rob Kochman <rv10rob(at)gmail.com>*

     To: *rv10-list(at)matronics.com*

     Sent: *Tue, Nov 9, 2010 06:30:55 GMT+00:00*

     Subject: *Re: Seat rail alignment issue



     Thanks, Bob... I looked around for something I might have done

     wrong, but there's not too much complicated around there, and the

     left and the right ones are the same.  For anyone else who may run

     into this, I called Van's, and they said it would be acceptable to

     "slot" the holes in the seat rail support, where it attaches to

     the gear weldment, so that's what I did, and all's well.

     Thanks...

     -Rob



     On Sun, Nov 7, 2010 at 1:43 PM, Bob Leffler <rv(at)thelefflers.com

     <mailto:rv(at)thelefflers.com>> wrote:



         Iâ€™m sure youâ€™ve already thought of this, but I when I run into

         this situation, itâ€™s usually because Iâ€™ve orientated the piece

         incorrectly.  i.e. upside down or left swapped with right.



         *From:*owner-rv10-list-server(at)matronics.com

         <mailto:owner-rv10-list-server(at)matronics.com>

         [mailto:owner-rv10-list-server(at)matronics.com

         <mailto:owner-rv10-list-server(at)matronics.com>] *On Behalf Of

         *Rob Kochman

         *Sent:* Sunday, November 07, 2010 12:40 PM

         *To:* rv10-list

         *Subject:* Seat rail alignment issue



         Hi, all... I'm installing the seat rails now, and I have a fit

         problem.  I bolted the outboard mid rail support to the

         landing gear weldment (that was fun), but the holes for the

         rail aren't lining up with the seat floor.  The seat floor and

         rails agree, but the mid rail support doesn't.  Pic attached

         (left side of the picture is forward).  The right seat is

         pictured, but It's pretty much the same on the left side. 

         Anyone run into this issue?



         Thanks...



         -Rob



         -- 

         Rob Kochman

         RV-10 "Finishing" Kit

         Woodinville, WA (near Seattle)

         http://kochman.net/N819K



         *



         "_blank">www.aeroelectric.com

         .com/" target="_blank">www.buildersbooks.com

         ="_blank">www.homebuilthelp.com

         _blank">http://www.matronics.com/contribution

         get="_blank">http://www.matronics.com/Navigator?RV10-List

         ttp://forums.matronics.com

         *





     -- 

     Rob Kochman

     RV-10 "Finishing" Kit

     Woodinville, WA (near Seattle)

     http://kochman.net/N819K



     *



     *



 ï¿½ï¿½ï¿½~ï¿½ï¿½,ï¿½gï¿½ï¿½ï¿½M4ï¿½Gï¿½qï¿½ï¿½ï¿½zï¿½ï¿½ï¿½ï¿½.ï¿½'ï¿½ï¿½ï¿½ï¿½ï¿½ï¿½ï¿½ï¿½ï¿½ï¿½ï¿½ï¿½ï¿½ï¿½ï¿½ï¿½ï¿½yï¿½Jï¿½iï¿½ï¿½Xï¿½ï¿½ËŠï¿½lN ï¿½2ï¿½ï¿½ï¿½tgï¿½Jï¿½ï¿½a8ï¿½DAï¿½ï¿½lï¿½ï¿½ï¿½zï¿½ï¿½ï¿½ï¿½ï¿½{ï¿½ï¿½ï¿½ï¿½ï¿½[ï¿½uï¿½ï¿½ï¿½Â–'$ï¿½pï¿½à¨žï¿½ï¿½nï¿½bï¿½ybï¿½FÞ–ï¿½- 

 ï¿½ï¿½vï¿½ï¿½ï¿½ï¿½ï¿½iï¿½.ï¿½ï¿½Ìžjï¿½zï¿½ï¿½~'ï¿½çˆÇ§ï¿½+ï¿½'ï¿½ï¿½'^t 

 ï¿½ï¿½ï¿½%yï¿½kï¿½Æ¡ï¿½ï¿½ï¿½iï¿½ï¿½0ï¿½ï¿½ï¿½ï¿½^rï¿½ï¿½qï¿½&ï¿½zï¿½ï¿½ï¿½-ï¿½'ï¿½oï¿½8ï¿½uï¿½ï¿½ï¿½$ï¿½ï¿½+yï¿½kyï¿½ï¿½ï¿½0nï¿½uï¿½ï¿½nï¿½$ï¿½ï¿½&ï¿½ï¿½)]zï¿½ï¿½ï¿½,rï¿½ï¿½hï¿½ï¿½ï¿½[Gï¿½Ú†ï¿½ï¿½ï¿½ï¿½ï¿½ï¿½hï¿½ï¿½ï¿½[azZ\ï¿½l0ï¿½&yï¿½ï¿½ï¿½ï¿½^ï¿½ï¿½(ï¿½ï¿½ï¿½ï¿½ï¿½*'ï¿½ï¿½ï¿½ï¿½Ø¨ï¿½gï¿½J+^ï¿½ï¿½ï¿½ï¿½iï¿½ï¿½0ï¿½fï¿½ï¿½ï¿½ï¿½rï¿½(ï¿½ï¿½(ï¿½ï¿½ï¿½nï¿½bï¿½xmï¿½ï¿½ï¿½ï¿½&jï¿½ï¿½',rï¿½ï¿½rï¿½ï¿½&ï¿½*'ï¿½Nï¿½ï¿½*.~ï¿½ï¿½ï¿½ï¿½zwï¿½ï¿½ï¿½,ï¿½ï¿½hï¿½1ï¿½mï¿½ï¿½ï¿½ï¿½ï¿½ï¿½ï¿½)ï¿½ï¿½ï¿½ï¿½ï¿½ï¿½ï¿½ï¿½ï¿½ï¿½ï¿½ï¿½ï¿½ï¿½ï¿½8E]t.+-fï¿½ï¿½Z+ï¿½`ï¿½ï¿½axÆï¿½ï¿½ï¿½rï¿½ï¿½ï¿½^jÛ«zï¿½Zï¿½(ï¿½ï¿½ï¿½ï¿½ï¿½Ç¶ï¿½j|ï¿½ï¿½ï¿½nï¿½)bï¿½'ï¿½ï¿½ï¿½!jï¿½ï¿½ï¿½'ï¿½+ï¿½ï¿½ï¿½ï¿½Ø¨ï¿½ï¿½rï¿½y'ï¿½ï¿½ï¿½Cï¿½ 

 å¡§{ 

 ï¿½ï¿½ï¿½ï¿½,x(Zï¿½Pï¿½ï¿½!jï¿½ï¿½ï¿½Ù®rï¿½rï¿½ï¿½jï¿½|ï¿½ï¿½ï¿½ï¿½&jï¿½ï¿½',rï¿½ï¿½5ï¿½â«hï¿½uÐ¸ï¿½ï¿½mï¿½ï¿½ï¿½ï¿½ ï¿½ï¿½ï¿½'ï¿½ï¿½ï¿½oï¿½jï¿½jï¿½+E]t.+-ï¿½ï¿½ï¿½ï¿½ï¿½ï¿½ï¿½ï¿½ï¿½ï¿½ï¿½ï¿½ï¿½ï¿½ï¿½ï¿½0ï¿½8ï¿½Iaï¿½T1 

 jgï¿½ï¿½ï¿½rï¿½ï¿½z{Zï¿½ï¿½ï¿½ï¿½ï¿½iï¿½^ï¿½&ï¿½ï¿½ï¿½lZ+ï¿½kï¿½yï¿½ï¿½ï¿½ï¿½+ï¿½k&jï¿½ï¿½',rï¿½ï¿½ï¿½ï¿½ï¿½ï¿½+ï¿½k&jï¿½ï¿½',rï¿½ï¿½hï¿½ï¿½ï¿½ï¿½ï¿½ï¿½ï¿½ï¿½ï¿½ï¿½ï¿½ï¿½ï¿½ï¿½ï¿½ï¿½ï¿½'ï¿½ï¿½k{ï¿½ï¿½w/ï¿½tml=

- The Matronics RV10-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?RV10-List

rv10rob(at)gmail.com
Guest

Posted: Tue Nov 09, 2010 9:45 am Post subject: Seat rail alignment issue

Yes, the plates (I think they're called seat bases in the plans) are not identical--the holes for the side panel attachment need to be on the outside.Â  The mid seat rail supports (the part that bolts to the gear weldment) are identical.

  Â 

 Thanks...

 Â 

 -Rob

 On Tue, Nov 9, 2010 at 5:42 AM, Sean Stephens <sean(at)stephensville.com (sean(at)stephensville.com)> wrote:

 [quote]--> RV10-List message posted by: Sean Stephens <sean(at)stephensville.com (sean(at)stephensville.com)>

 

Just did the seat plates a few weeks ago. Â They are not identical, but rather mirror images of one another. Â It took me a while to figure out how they went together, but reading ahead in the plans and seeing how they are supposed to attach helped.

 

Check and make sure you made them mirror images as opposed to identical.



-Sean #40303  



On 11/9/10 5:50 AM, carl.froehlich(at)verizon.net (carl.froehlich(at)verizon.net) wrote:



  	  Quote: 	
		   I think the left and right seat plates are not identical.



Carl



Sent from my mobile phone. Â  Please read past the typos.

-----Original message-----



Â  Â *From: *Rob Kochman <rv10rob(at)gmail.com (rv10rob(at)gmail.com)>*

 Â  Â To: *rv10-list(at)matronics.com (rv10-list(at)matronics.com)*

Â  Â Sent: *Tue, Nov 9, 2010 06:30:55 GMT+00:00*

Â  Â Subject: *Re: RV10-List: Seat rail alignment issue



Â  Â Thanks, Bob... I looked around for something I might have done

 Â  Â wrong, but there's not too much complicated around there, and the

Â  Â left and the right ones are the same. Â For anyone else who may run

Â  Â into this, I called Van's, and they said it would be acceptable to

 Â  Â "slot" the holes in the seat rail support, where it attaches to

Â  Â the gear weldment, so that's what I did, and all's well.

Â  Â Thanks...

Â  Â -Rob



Â  Â On Sun, Nov 7, 2010 at 1:43 PM, Bob Leffler <rv(at)thelefflers.com (rv(at)thelefflers.com)

 

  

 Â  Â <mailto:rv(at)thelefflers.com (rv(at)thelefflers.com)>> wrote:



Â  Â  Â  Â Iâ€™m sure youâ€™ve already thought of this, but I when I run into

Â  Â  Â  Â this situation, itâ€™s usually because Iâ€™ve orientated the piece

 Â  Â  Â  Â incorrectly. Â i.e. upside down or left swapped with right.



Â  Â  Â  Â *From:*owner-rv10-list-server(at)matronics.com (owner-rv10-list-server(at)matronics.com)

Â  Â  Â  Â <mailto:owner-rv10-list-server(at)matronics.com (owner-rv10-list-server(at)matronics.com)>

 Â  Â  Â  Â [mailto:owner-rv10-list-server(at)matronics.com (owner-rv10-list-server(at)matronics.com)

Â  Â  Â  Â <mailto:owner-rv10-list-server(at)matronics.com (owner-rv10-list-server(at)matronics.com)>] *On Behalf Of

 Â  Â  Â  Â *Rob Kochman

Â  Â  Â  Â *Sent:* Sunday, November 07, 2010 12:40 PM

Â  Â  Â  Â *To:* rv10-list

Â  Â  Â  Â *Subject:* RV10-List: Seat rail alignment issue



Â  Â  Â  Â Hi, all... I'm installing the seat rails now, and I have a fit

 Â  Â  Â  Â problem. Â I bolted the outboard mid rail support to the

Â  Â  Â  Â landing gear weldment (that was fun), but the holes for the

Â  Â  Â  Â rail aren't lining up with the seat floor. Â The seat floor and

Â  Â  Â  Â rails agree, but the mid rail support doesn't. Â Pic attached

 Â  Â  Â  Â (left side of the picture is forward). Â The right seat is

Â  Â  Â  Â pictured, but It's pretty much the same on the left side. Â  Â  Â  Â  Anyone run into this issue?



Â  Â  Â  Â Thanks...



Â  Â  Â  Â -Rob



 Â  Â  Â  Â -- Â  Â  Â  Â  Rob Kochman

Â  Â  Â  Â RV-10 "Finishing" Kit

Â  Â  Â  Â Woodinville, WA (near Seattle)

Â  Â  Â  Â http://kochman.net/N819K



Â  Â  Â  Â *

 

Â  Â  Â  Â "_blank">www.aeroelectric.com

Â  Â  Â  Â .com/" target="_blank">www.buildersbooks.com

 Â  Â  Â  Â ="_blank">www.homebuilthelp.com

Â  Â  Â  Â _blank">http://www.matronics.com/contribution

 Â  Â  Â  Â get="_blank">http://www.matronics.com/Navigator?RV10-List

Â  Â  Â  Â ttp://forums.matronics.com

 Â  Â  Â  Â *





Â  Â -- Â  Â  Rob Kochman

Â  Â RV-10 "Finishing" Kit

Â  Â Woodinville, WA (near Seattle)

Â  Â http://kochman.net/N819K

 

Â  Â *



Â  Â *



ï¿½ï¿½ï¿½~ï¿½ï¿½,ï¿½ gï¿½ï¿½ï¿½M4ï¿½Gï¿½qï¿½ï¿½ï¿½zï¿½ï¿½ï¿½ï¿½.ï¿½'ï¿½ï¿½ï¿½ï¿½ï¿½ï¿½ï¿½ï¿½ï¿½ï¿½ï¿½ï¿½ï¿½ï¿½ï¿½ï¿½ï¿½yï¿½ Jï¿½iï¿½ï¿½Xï¿½ï¿½ËŠï¿½lN Â ï¿½2ï¿½ï¿½ï¿½tgï¿½Jï¿½ï¿½ a 8ï¿½ DA ï¿½ï¿½lï¿½ï¿½ï¿½zï¿½ï¿½ï¿½ ï¿½ï¿½{ï¿½ï¿½ï¿½ï¿½ï¿½[ï¿½u ï¿½ï¿½ï¿½â€“'$ï¿½pï¿½à¨žï¿½ï¿½nï¿½bï¿½ybï¿½FÞ–ï¿½- ï¿½ï¿½vï¿½ï¿½ï¿½ï¿½ï¿½iï¿½.ï¿½ ï¿½Ìžjï¿½ zï¿½ï¿½~' ï¿½çˆÇ§ï¿½+ï¿½ 'ï¿½ï¿½'^t Â ï¿½ï¿½ï¿½%yï¿½kï¿½Æ¡ï¿½ï¿½ï¿½iï¿½ï¿½0ï¿½ï¿½ï¿½ï¿½^rï¿½ï¿½qï¿½&ï¿½ zï¿½ ï¿½ï¿½-ï¿½' ï¿½oï¿½ 8 ï¿½uï¿½ï¿½ ï¿½$ï¿½ï¿½+yï¿½kyï¿½ï¿½ ï¿½ 0nï¿½uï¿½ï¿½nï¿½$ï¿½ï¿½&ï¿½ ï¿½)]zï¿½ ï¿½ï¿½,rï¿½ï¿½h ï¿½ï¿½ï¿½[G ï¿½Ú†ï¿½ï¿½ Â ï¿½ï¿½ï¿½ï¿½ hï¿½ï¿½ï¿½[azZ\ï¿½l0ï¿½ &yï¿½ï¿½ï¿½ï¿½^ï¿½ï¿½(ï¿½ï¿½ï¿½ï¿½ï¿½*'ï¿½ï¿½ï¿½ï¿½Ø¨ï¿½gï¿½J+^ï¿½ï¿½ï¿½ï¿½iï¿½ï¿½0ï¿½fï¿½ï¿½ï¿½ï¿½rï¿½(ï¿½ï¿½(ï¿½ï¿½ï¿½nï¿½bï¿½xmï¿½ï¿½ï¿½ï¿½ &jï¿½ï¿½',rï¿½ï¿½rï¿½ï¿½&ï¿½*'ï¿½N ï¿½ï¿½*.~ï¿½ï¿½ï¿½ï¿½zwï¿½ï¿½ï¿½,ï¿½ï¿½hï¿½1ï¿½m ï¿½ï¿½ï¿½ï¿½ï¿½ï¿½ ï¿½)ï¿½ï¿½ï¿½ï¿½ï¿½ï¿½ï¿½ï¿½ï¿½ï¿½ï¿½ï¿½ï¿½ï¿½ï¿½ 8E]t.+- fï¿½ï¿½Z+ï¿½`ï¿½ï¿½axÆï¿½ï¿½ï¿½rï¿½ï¿½ï¿½^jÛ«zï¿½Zï¿½( ï¿½ï¿½ï¿½ï¿½ï¿½Ç¶ ï¿½j|ï¿½ï¿½ï¿½nï¿½)bï¿½'ï¿½ï¿½ï¿½!jï¿½ï¿½ï¿½'ï¿½+ï¿½ï¿½ï¿½ï¿½Ø¨ï¿½ï¿½r ï¿½y'ï¿½ï¿½ï¿½Cï¿½ å¡§{ ï¿½ï¿½ï¿½ï¿½,x(Zï¿½P ï¿½ï¿½!jï¿½ï¿½ï¿½Ù®r ï¿½r ï¿½ï¿½j ï¿½| ï¿½ï¿½ï¿½ï¿½ &jï¿½ï¿½',rï¿½ï¿½5ï¿½â«hï¿½ uÐ¸ï¿½ï¿½ mï¿½ï¿½ï¿½ï¿½ ï¿½ï¿½ï¿½'ï¿½ï¿½ ï¿½oï¿½jï¿½jï¿½+E]t.+-ï¿½ï¿½ï¿½ï¿½ï¿½ï¿½ï¿½ï¿½ï¿½ï¿½ï¿½ï¿½ï¿½ï¿½ï¿½ï¿½0 ï¿½8ï¿½ Ia Â ï¿½T1 jgï¿½ï¿½ï¿½rï¿½ï¿½z{Zï¿½ï¿½ ï¿½ï¿½ï¿½iï¿½^ï¿½&ï¿½ï¿½ï¿½lZ+ï¿½k ï¿½yï¿½ï¿½ ï¿½ï¿½+ï¿½k&jï¿½ï¿½',rï¿½ï¿½ï¿½ï¿½ ï¿½ï¿½+ï¿½k&jï¿½ï¿½',rï¿½ï¿½hï¿½ï¿½ï¿½ï¿½ï¿½ï¿½ï¿½ï¿½ï¿½ï¿½ï¿½ï¿½ï¿½ï¿½ï¿½ï¿½ï¿½'ï¿½ï¿½k{ï¿½ï¿½w/ï¿½tml=

 	
  

 

_-============================================================

_-=

_-= Â  Â  Â  -- Please Support Your Lists This Month --

_-= Â  Â  Â  Â  Â  (And Get Some AWESOME FREE Gifts!)

_-=

_-= Â  November is the Annual List Fund Raiser. Â Click on

- The Matronics RV10-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?RV10-List

Display posts from previous:

	Matronics Email Lists Forum Index -> RV10-List	All times are GMT - 8 Hours
Page 1 of 1

Jump to:

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum