Matronics Email Lists :: View topic - Ch701 Hardware.. A reply from a scratch builder appreciated

Matronics Email Lists
Web Forum Interface to the Matronics Email Lists

Get Email Distribution Too! FAQ Search Memberlist Usergroups Register

Profile Log in to check your private messages Log in

Ch701 Hardware.. A reply from a scratch builder appreciated

Matronics Email Lists Forum Index -> Zenith-List

View previous topic :: View next topic

Author Message

lo2u

Joined: 11 Apr 2006
Posts: 46
Location: Upstate New York

Posted: Wed May 03, 2006 2:22 pm Post subject: Ch701 Hardware.. A reply from a scratch builder appreciated

I have been cutting aluminum and now have gotten to the point where I want 

to order hardware bolts ..steel etc..



First much thanks to the member who posted the 701 BOM ..very helpful. My 

question is this which makes more sense to struggle through the AN list and 

quantities a P/N at a time or order one of the Hardware kits such as is 

found on pages 81 and 82 in the Aircraft Spruce book or if you know of a 

better source I am open to suggestion.. Also which are used Cadmium or 

Stainless?



Thanks,



Ron Culver

- The Matronics Zenith-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Zenith-List

rjscep(at)yahoo.com
Guest

Posted: Wed May 03, 2006 6:56 pm Post subject: Ch701 Hardware.. A reply from a scratch builder appreciated

 	  Quote: 	
		   Hi Ron, fellow scratch builder here too. I got a

list
	


 	  Quote: 	
		   from the packing list posted on the Zenith site. Its

 from builders resources. There's a packing list that

 lists all the hardware you need plus the rivets.

 the site is "welcome to ch701.com." I am getting my

 hardware from a NH supplier. D&D Aircraft supply.

 check with them to see if it suits you. They have an

 800 number. 1 800 468-8000..... Bob S.

--- Ron Culver <rculver(at)nycap.rr.com> wrote:
	




 	  Quote: 	
		   

 <rculver(at)nycap.rr.com>

 

 I have been cutting aluminum and now have gotten to

 the point where I want 

 to order hardware bolts ..steel etc..

 

 First much thanks to the member who posted the 701

 BOM ..very helpful. My 

 question is this which makes more sense to struggle

 through the AN list and 

 quantities a P/N at a time or order one of the

 Hardware kits such as is 

 found on pages 81 and 82 in the Aircraft Spruce book

 or if you know of a 

 better source I am open to suggestion.. Also which

 are used Cadmium or 

 Stainless?

 

 Thanks,

 

 Ron Culver 

 

 

 

 



 browse

 Subscriptions page,

 FAQ,

 http://www.matronics.com/Navigator?Zenith-List

 Admin.



 

 

 

  

  

  

 

 

 

 


	




__________________________________________________

Do You Yahoo!?

Tired of spam?  Yahoo! Mail has the best spam protection around 

http://mail.yahoo.com

- The Matronics Zenith-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Zenith-List

lo2u

Joined: 11 Apr 2006
Posts: 46
Location: Upstate New York

Posted: Wed May 03, 2006 7:52 pm Post subject: Ch701 Hardware.. A reply from a scratch builder appreciated

Thanks Bob I have that list but am a bit stymied by the A/R listings. 

Without actually mentally doing each section how do I know how many equals 

"as required"..some are pretty clear a number is given. Also did you as Paul 

Mulwitz suggested send them a list and ask for a bid or did you buy a set 

which would include bolts,washers,nuts etc?



I can give them a call tomorrow.Is it poissible they still have your list 

with the correct amounts. I noticed on another post someone saying that 

registered plans have each part listed on the page.. Hmm I have a registered 

set of plans and while i have a set of drawings of numbered parts  I don't 

seem to have any such for much of the bolts etc at least in a readily usable 

format.. As I said I am at an early stage and I know this will get clearer 

as I progress but i am trying get my ducks in a row for when I arrive at a 

stage to have all of the parts on hand not awaiting an order from some 

supplier.



Thanks for the reply,



Ron Culver

 701 early stages

rudder done,except for attaching bolts etc..most of rear fuselage cut but 

not in finished form yet.. some wing forms done but no aluminum formed there 

so far

---

- The Matronics Zenith-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Zenith-List

Chris Lewis

Joined: 17 Mar 2006
Posts: 56
Location: Seattle

Posted: Thu May 04, 2006 6:26 am Post subject: Re: Ch701 Hardware.. A reply from a scratch builder apprecia

Zenith sells a kit with all of the hardware nicely divided by type and size. Give Nick a call. He'll set you up.



Chris in Seattle

- The Matronics Zenith-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Zenith-List

_________________
750/ Zen-vair Semi-Scratch Builder
N750XT (reserved)

lo2u

Joined: 11 Apr 2006
Posts: 46
Location: Upstate New York

Posted: Thu May 04, 2006 7:13 am Post subject: Ch701 Hardware.. A reply from a scratch builder appreciated

Thanks Chris..sounds like a great solution..much appreciated. I saw that but 

thought it was tools etc.. guess I better read more carefully.. 8^)

Ron Culver

---

- The Matronics Zenith-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Zenith-List

lo2u

Joined: 11 Apr 2006
Posts: 46
Location: Upstate New York

Posted: Thu May 04, 2006 8:26 am Post subject: Ch701 Hardware.. A reply from a scratch builder appreciated

Just got off the phone with Nick. Bolts etc are OTW. So happy and thankful 

.to Paul,Bob,Chris et al..

Ron ( way too happy) Culver

---

- The Matronics Zenith-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Zenith-List

Display posts from previous:

	Matronics Email Lists Forum Index -> Zenith-List	All times are GMT - 8 Hours
Page 1 of 1

Jump to:

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum