Matronics Email Lists :: View topic

Matronics Email Lists
Web Forum Interface to the Matronics Email Lists

Get Email Distribution Too! FAQ Search Memberlist Usergroups Register

Profile Log in to check your private messages Log in

403 Inputs

Matronics Email Lists Forum Index -> AeroElectric-List

View previous topic :: View next topic

Author Message

pete.howell(at)gecko-grou
Guest

Posted: Fri May 12, 2006 4:36 am Post subject: 403 Inputs

Hi Brian,



I can't help you with the math behind the components,  but I do have

one way to do the packaging.   I used a 15 pin-sub connector as the

base for the device.  I soldered one lead of the resistor and cap

togecther and then bent it into a "U" shape and crimped sockets on

each end.  Then I covered each resistor/cap pair (isolator) in heat

shrink and put it in the connector.  When all the isolators were in

place, more heat shrink over the entire thing.   Incoming and

outgoing wire comes into the mating connector and get d-sub pins.



Drop me an e-mail and I will send some pics.



Pete

- The Matronics AeroElectric-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?AeroElectric-List

Display posts from previous:

	Matronics Email Lists Forum Index -> AeroElectric-List	All times are GMT - 8 Hours
Page 1 of 1

Jump to:

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum