 |
Matronics Email Lists
Web Forum Interface to the Matronics Email Lists
|
| View previous topic :: View next topic |
| Author |
Message |
bo124rs(at)hotmail.com
Guest
|
 Posted: Tue May 16, 2006 3:16 am Post subject: Barry Mounts and torque |
 |
|
I bought four new barry mounts locally and have a couple question. The shop
I bought them from stated to position the ridged half on the load side of
the mount, thus on the top face the ridges rearward and on the bottom face
them forward. I looked at a fellow builder's 7 over the weekend and a
visitor to his hanger stated just the opposite, the ridges went forward on
the top and rearward on the bottom. What gives???
Since I bought these locally, I don't have the required 7 bolt length and
metal locking nut torques. Looks to me like it will be 4.5" to clear the
acc. case (1" thick) by 1/2". What da yee say??
Also I need a torque value on this bolt/mount combo.
Want to hang this engine!!!!!
Dana Overall
Richmond, KY i39
RV-7 slider, Imron black, "Black Magic"
O 360 A1A, C/S C2YK-1BF/F7666A4
http://rvflying.tripod.com/id30.html
do not archive
_________________________________________________________________
Express yourself instantly with MSN Messenger! Download today - it's FREE!
http://messenger.msn.click-url.com/go/onm00200471ave/direct/01/
| | - The Matronics RV-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?RV-List |
|
|
|
| Back to top |
|
 |
jsflyrv(at)verizon.net
Guest
|
| Posted: Tue May 16, 2006 4:09 am Post subject: Barry Mounts and torque |
|
|
Dana Overall wrote:
| Quote: |
I bought four new barry mounts locally and have a couple question. The shop
I bought them from stated to position the ridged half on the load side of
the mount, thus on the top face the ridges rearward and on the bottom face
them forward. I looked at a fellow builder's 7 over the weekend and a
visitor to his hanger stated just the opposite, the ridges went forward on
the top and rearward on the bottom. What gives???
Since I bought these locally, I don't have the required 7 bolt length and
metal locking nut torques. Looks to me like it will be 4.5" to clear the
acc. case (1" thick) by 1/2". What da yee say??
Also I need a torque value on this bolt/mount combo.
Want to hang this engine!!!!!
Dana Overall
Richmond, KY i39
RV-7 slider, Imron black, "Black Magic"
O 360 A1A, C/S C2YK-1BF/F7666A4
http://rvflying.tripod.com/id30.html
do not archive
The shop you bought them from is right.
|
| | - The Matronics RV-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?RV-List |
|
|
|
| Back to top |
|
|
recapen(at)earthlink.net
Guest
|
| Posted: Tue May 16, 2006 4:47 am Post subject: Barry Mounts and torque |
|
|
Check the archives - I think I got the torque values for my engine mounts there.....
--
| | - The Matronics RV-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?RV-List |
|
|
|
| Back to top |
|
|
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum
|
Powered by phpBB © 2001, 2005 phpBB Group
|
Get Email Distribution Too!
FAQ
Search
Memberlist
Usergroups
Register
Profile
Log in to check your private messages
Log in
