Matronics Email Lists :: View topic - Sealing the Oil Cooler

Matronics Email Lists
Web Forum Interface to the Matronics Email Lists

Get Email Distribution Too! FAQ Search Memberlist Usergroups Register

Profile Log in to check your private messages Log in

Sealing the Oil Cooler

Matronics Email Lists Forum Index -> RV10-List

View previous topic :: View next topic

Author Message

philperry9(at)gmail.com
Guest

Posted: Tue Nov 22, 2011 2:12 pm Post subject: Sealing the Oil Cooler

Last night I installed the oil cooler onto the airbox and noticed it's a very leaky setup.  Attached is a photo of the *inside* of the airbox and you'll notice some big gaps on the corners and even a gap down the sides.

 

Has anyone sealed these?  I'm thinking of putting a fillet of red rtv along the edges and a blob in the corners to keep the air moving through the cooler and not around it.



Phil

- The Matronics RV10-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?RV10-List

photo.JPG

Description:

Filesize:

702.83 KB

Viewed:

2202 Time(s)

pitts_pilot(at)bellsouth.
Guest

Posted: Tue Nov 22, 2011 2:24 pm Post subject: Sealing the Oil Cooler

On 11/22/2011 5:08 PM, Phillip Perry wrote:

 	  Quote: 	
		   Last night I installed the oil cooler onto the airbox and noticed it's 

 a very leaky setup.  Attached is a photo of the *inside* of the airbox 

 and you'll notice some big gaps on the corners and even a gap down the 

 sides.



 Has anyone sealed these?  I'm thinking of putting a fillet of red rtv 

 along the edges and a blob in the corners to keep the air moving 

 through the cooler and not around it.

That's what I did.
	


Linn

 	  Quote: 	
		  

 Phil

- The Matronics RV10-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?RV10-List

aerosport1

Joined: 07 Nov 2007
Posts: 231

Posted: Tue Nov 22, 2011 3:01 pm Post subject: Sealing the Oil Cooler

Phil I sealed mine but used a silver RTV high temp which does  not show as much as the red

  

 Geoff

  

    

  



   From: owner-rv10-list-server(at)matronics.com  [mailto:owner-rv10-list-server(at)matronics.com] On Behalf Of Phillip  Perry

Sent: Tuesday, November 22, 2011 5:09 PM

To:  rv10-list(at)matronics.com

Subject: Sealing the Oil  Cooler

 

Last night I installed the oil cooler onto the airbox and noticed  it's a very leaky setup.  Attached is a photo of the *inside* of the airbox  and you'll notice some big gaps on the corners and even a gap down the  sides.



Has anyone sealed these?  I'm thinking of putting a fillet of  red rtv along the edges and a blob in the corners to keep the air moving through  the cooler and not around it.



Phil

    [quote][b]

- The Matronics RV10-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?RV10-List

_________________
Geoff Combs
RV-10 QB N829GW
Flying 500 hrs
40033

robin(at)PaintTheWeb.com
Guest

Posted: Tue Nov 22, 2011 3:20 pm Post subject: Sealing the Oil Cooler

Because Geoff's RV-10 looks amazing even from inside the oil cooler wedge! 

  

Robin 

Do Not Archive   

From: owner-rv10-list-server(at)matronics.com [mailto:owner-rv10-list-server(at)matronics.com] On Behalf Of Geoff Combs

 Sent: Tuesday, November 22, 2011 2:59 PM

 To: rv10-list(at)matronics.com

 Subject: RE: Sealing the Oil Cooler 

 

 

  

Phil I sealed mine but used a silver RTV high temp which does not show as much as the red 

  

Geoff  

  

  

  

  

  

 

    

 

From: owner-rv10-list-server(at)matronics.com [mailto:owner-rv10-list-server(at)matronics.com] On Behalf Of Phillip Perry

 Sent: Tuesday, November 22, 2011 5:09 PM

 To: rv10-list(at)matronics.com

 Subject: Sealing the Oil Cooler 

Last night I installed the oil cooler onto the airbox and noticed it's a very leaky setup.  Attached is a photo of the *inside* of the airbox and you'll notice some big gaps on the corners and even a gap down  the sides.

 

 Has anyone sealed these?  I'm thinking of putting a fillet of red rtv along the edges and a blob in the corners to keep the air moving through the cooler and not around it.

 

 Phil

 

   	  Quote: 	
		    	
 ==============[/b][/quote] sts This Month --[/b][/quote] And Get Some AWESOME FREE Gifts!)[/b][/quote] ick on[/b][/quote] t[/b][/quote] d[/b][/quote] aeroelectric.com">www.aeroelectric.com[/b][/quote] http://www.buildersbooks.com">www.buildersbooks.com[/b][/quote] .homebuilthelp.com">www.homebuilthelp.com[/b][/quote] bution">http://www.matronics.com/contribution[/b][/quote] b>[/quote] bsp;                   -Matt Dralle, List Admin.[/b][/quote] ==============[/b][/quote] V10-List Email Forum -[/b][/quote] >[/b][/quote] :p>[/b][/quote] /o:p>[/b][/quote] tor?RV10-List">http://www.matronics.com/Navigator?RV10-List[/b][/quote] ==============[/b][/quote] bsp;    - MATRONICS WEB FORUMS -[/b][/quote] :p>[/b][/quote] tp://forums.matronics.com[/b][/quote] ==============[/b][/quote] bsp;  - List Contribution Web Site -[/b][/quote] e> bsp;                   -Matt Dralle, List Admin.[/b][/quote] bution">http://www.matronics.com/contribution[/b][/quote] ==============[/b] [b]

- The Matronics RV10-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?RV10-List

bgill1(at)charter.net
Guest

Posted: Tue Nov 22, 2011 3:20 pm Post subject: Sealing the Oil Cooler

That’s what I did.  Lot more of the red high temp RTV on the baffles and sealing around the engine as well.

 

Byron

 

N253RV still in phase one but loving it more each day.

 

 

From: owner-rv10-list-server(at)matronics.com [mailto:owner-rv10-list-server(at)matronics.com] On Behalf Of Phillip Perry

Sent: Tuesday, November 22, 2011 5:09 PM

To: rv10-list(at)matronics.com

Subject: Sealing the Oil Cooler



 

Last night I installed the oil cooler onto the airbox and noticed it's a very leaky setup.  Attached is a photo of the *inside* of the airbox and you'll notice some big gaps on the corners and even a gap down the sides.



Has anyone sealed these?  I'm thinking of putting a fillet of red rtv along the edges and a blob in the corners to keep the air moving through the cooler and not around it.



Phil

   [quote][b]

- The Matronics RV10-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?RV10-List

philperry9(at)gmail.com
Guest

Posted: Tue Nov 22, 2011 3:43 pm Post subject: Sealing the Oil Cooler

I'm going to be hiding all my firewall awesomeness behind a split cowling and paint! 



One the topic of baffles and installing RTV.  Has anyone found an applicator that's long (~12 Inches) and skinny (~3/16") for pumping the stuff into some pretty tight spots?  It seems like there could be a pneumatic applicator or a mechanical plunger type that would get you into some pretty tight spots.

 

On Tue, Nov 22, 2011 at 5:20 PM, Robin Marks <robin(at)painttheweb.com (robin(at)painttheweb.com)> wrote:

[quote]         

Because Geoff's RV-10 looks amazing even from inside the oil cooler wedge! 

  

Robin 

Do Not Archive   

From: owner-rv10-list-server(at)matronics.com (owner-rv10-list-server(at)matronics.com) [mailto:owner-rv10-list-server(at)matronics.com (owner-rv10-list-server(at)matronics.com)] On Behalf Of Geoff Combs

 Sent: Tuesday, November 22, 2011 2:59 PM

 To: rv10-list(at)matronics.com (rv10-list(at)matronics.com)

 Subject: RE: Sealing the Oil Cooler 

 

 

  

Phil I sealed mine but used a silver RTV high temp which does not show as much as the red  

  

Geoff  

  

  

  

  

  

 

    

 

From: owner-rv10-list-server(at)matronics.com (owner-rv10-list-server(at)matronics.com) [mailto:owner-rv10-list-server(at)matronics.com (owner-rv10-list-server(at)matronics.com)] On Behalf Of Phillip Perry

 Sent: Tuesday, November 22, 2011 5:09 PM

 To: rv10-list(at)matronics.com (rv10-list(at)matronics.com)

 Subject: Sealing the Oil Cooler 

Last night I installed the oil cooler onto the airbox and noticed it's a very leaky setup.  Attached is a photo of the *inside* of the airbox and you'll notice some big gaps on the corners and even a gap down  the sides.

 

 Has anyone sealed these?  I'm thinking of putting a fillet of red rtv along the edges and a blob in the corners to keep the air moving through the cooler and not around it.

 

 Phil

 

   	  Quote: 	
		     	
 ============== sts This Month -- And Get Some AWESOME FREE Gifts!) ick on t d aeroelectric.com">www.aeroelectric.com http://www.buildersbooks.com">www.buildersbooks.com .homebuilthelp.com">www.homebuilthelp.com bution">http://www.matronics.com/contribution b> bsp;                   -Matt Dralle, List Admin. ============== V10-List Email Forum - > :p> /o:p> tor?RV10-List">http://www.matronics.com/Navigator?RV10-List ============== bsp;    - MATRONICS WEB FORUMS - :p> tp://forums.matronics.com ============== bsp;  - List Contribution Web Site - e> bsp;                   -Matt Dralle, List Admin. bution">http://www.matronics.com/contribution ==============  	  Quote: 	
		   



_blank">www.aeroelectric.com

.com" target="_blank">www.buildersbooks.com

="_blank">www.homebuilthelp.com

_blank">http://www.matronics.com/contribution

get="_blank">http://www.matronics.com/Navigator?RV10-List

tp://forums.matronics.com

_blank">http://www.matronics.com/contribution



	


[b]

- The Matronics RV10-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?RV10-List

speckter(at)comcast.net
Guest

Posted: Tue Nov 22, 2011 4:20 pm Post subject: Sealing the Oil Cooler

Grab a plastic straw from Mc Donalds and cram it on the end of your applicator and reach as far as you want. 

  

Gary Specketer



 

   

From: "Phillip Perry" <philperry9(at)gmail.com>

To: rv10-list(at)matronics.com

Sent: Tuesday, November 22, 2011 6:41:00 PM

Subject: Re: Sealing the Oil Cooler



I'm going to be hiding all my firewall awesomeness behind a split cowling and paint! 



One the topic of baffles and installing RTV.  Has anyone found an applicator that's long (~12 Inches) and skinny (~3/16") for pumping the stuff into some pretty tight spots?  It seems like there could be a pneumatic applicator or a mechanical plunger type that would get you into some pretty tight spots.



 On Tue, Nov 22, 2011 at 5:20 PM, Robin Marks <robin(at)painttheweb.com (robin(at)painttheweb.com)> wrote:

 [quote]   

Because Geoff's RV-10 looks amazing even from inside the oil cooler wedge! 

  

Robin 

Do Not Archive   

From: owner-rv10-list-server(at)matronics.com (owner-rv10-list-server(at)matronics.com) [mailto:owner-rv10-list-server(at)matronics.com (owner-rv10-list-server(at)matronics.com)] On Behalf Of Geoff Combs

Sent: Tuesday, November 22, 2011 2:59 PM

To: rv10-list(at)matronics.com (rv10-list(at)matronics.com)

Subject: RE: Sealing the Oil Cooler



 

  

Phil I sealed mine but used a silver RTV high temp which does not show as much as the red 

  

Geoff  

 

  

 

  

 

 

    

 

From: owner-rv10-list-server(at)matronics.com (owner-rv10-list-server(at)matronics.com) [mailto:owner-rv10-list-server(at)matronics.com (owner-rv10-list-server(at)matronics.com)] On Behalf Of Phillip Perry

Sent: Tuesday, November 22, 2011 5:09 PM

To: rv10-list(at)matronics.com (rv10-list(at)matronics.com)

Subject: Sealing the Oil Cooler 

Last night I installed the oil cooler onto the airbox and noticed it's a very leaky setup.  Attached is a photo of the *inside* of the airbox and you'll notice some big gaps on the corners and even a gap down the sides.



Has anyone sealed these?  I'm thinking of putting a fillet of red rtv along the edges and a blob in the corners to keep the air moving through the cooler and not around it.



Phil



 	  Quote: 	
		    	
============== sts This Month -- And Get Some AWESOME FREE Gifts!) ick on t d aeroelectric.com">www.aeroelectric.com http://www.buildersbooks.com">www.buildersbooks.com .homebuilthelp.com">www.homebuilthelp.com bution">http://www.matronics.com/contribution b> bsp;                   -Matt Dralle, List Admin. ============== V10-List Email Forum - > :p> /o:p> tor?RV10-List">http://www.matronics.com/Navigator?RV10-List ============== bsp;    - MATRONICS WEB FORUMS - :p> tp://forums.matronics.com ============== bsp;  - List Contribution Web Site - e> bsp;                   -Matt Dralle, List Admin. bution">http://www.matronics.com/contribution ==============  	  Quote: 	
		   



_blank">www.aeroelectric.com

.com" target="_blank">www.buildersbooks.com

="_blank">www.homebuilthelp.com

_blank">http://www.matronics.com/contribution

get="_blank">http://www.matronics.com/Navigator?RV10-List

tp://forums.matronics.com

_blank">http://www.matronics.com/contribution



	






_blank>www.aeroelectric.com

/" target=_blank>www.buildersbooks.com

=_blank>www.homebuilthelp.com

blank>http://www.matronics.com/contribution

get=_blank>http://www.matronics.com/Navigator?RV10-List

p://forums.matronics.com

blank>http://www.matronics.com/contribution



[b]

- The Matronics RV10-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?RV10-List

arplnplt(at)gmail.com
Guest

Posted: Tue Nov 22, 2011 9:57 pm Post subject: Sealing the Oil Cooler

I did the same.



Dave Leikam



do not archive



On Nov 22, 2011, at 4:08 PM, Phillip Perry wrote:



 	  Quote: 	
		   Last night I installed the oil cooler onto the airbox and noticed it's a very leaky setup.  Attached is a photo of the *inside* of the airbox and you'll notice some big gaps on the corners and even a gap down the sides.

 

 Has anyone sealed these?  I'm thinking of putting a fillet of red rtv along the edges and a blob in the corners to keep the air moving through the cooler and not around it.

 

 Phil

 

 

 <photo.JPG>

- The Matronics RV10-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?RV10-List

Display posts from previous:

	Matronics Email Lists Forum Index -> RV10-List	All times are GMT - 8 Hours
Page 1 of 1

Jump to:

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum