Matronics Email Lists :: View topic - Hole sizes conduits and static lines

Matronics Email Lists
Web Forum Interface to the Matronics Email Lists

Get Email Distribution Too! FAQ Search Memberlist Usergroups Register

Profile Log in to check your private messages Log in

Hole sizes conduits and static lines

Matronics Email Lists Forum Index -> RV10-List

View previous topic :: View next topic

Author Message

ron.mcgann(at)baesystems.
Guest

Posted: Sun May 28, 2006 9:01 pm Post subject: Hole sizes conduits and static lines

G'day all,   

About to start wiring and static plumbing.  Does anyone know of limitations on the size of holes that can be drilled into the fuse bulkheads/ribs to accommodate conduit and/or bushings?  I am particularly interested in any constraints on the F-1006C bulkhead (at the tailcone join), for the static pressure lines and potential GRT AHRS/magnetometer wire runs.  I already have a conduit installed under the baggage and rear set floor pans via 7/8" holes in the F-1005 and F-1034A bulkheads.  

TIA  

Ron   

187 Fuse/Finishing

- The Matronics RV10-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?RV10-List

Display posts from previous:

	Matronics Email Lists Forum Index -> RV10-List	All times are GMT - 8 Hours
Page 1 of 1

Jump to:

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum