 |
Matronics Email Lists
Web Forum Interface to the Matronics Email Lists
|
| View previous topic :: View next topic |
| Author |
Message |
dosmythe(at)cox.net
Guest
|
 Posted: Sat Jun 03, 2006 12:36 pm Post subject: West System Epoxy answer |
 |
|
Guy,
Like I said the other day, you would probably have to cut an access hole
in the tops of the tanks in order to be able to reach all the insides. The
hole might have to be 12 inches square or whatever it takes to reach all the
insides. Could possibly be done. After that, just fabricate an aluminum
plate for the hole and attach with flush screws. This is just a thought in
case many of us might have to make drastic changes due to ethanol or
whatever. I personally would rather consider this type approach than doing
a blanket tank change out.
Don Smythe
---
| | - The Matronics Kitfox-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?Kitfox-List |
|
|
|
| Back to top |
|
 |
roncarolnikko(at)hotmail.
Guest
|
| Posted: Sat Jun 03, 2006 1:35 pm Post subject: West System Epoxy answer |
|
|
I am in favor of Brads' fuse tank only using our old tanks for a
compartment. I could put a smaller tank inside of mine which would still
outlast my bladder. The cg would not be a problem then. Could be prefabbed
and dropped in Dons' hole with a flange built on top to rivett over the hole
and be done quickly. Ron NB Ore
[quote]From: "Don Smythe" <dosmythe(at)cox.net>
Reply-To: kitfox-list(at)matronics.com
To: <kitfox-list(at)matronics.com>
Subject: Re: Re: West System Epoxy answer
Date: Sat, 3 Jun 2006 16:33:31 -0400
Guy,
Like I said the other day, you would probably have to cut an access
hole
in the tops of the tanks in order to be able to reach all the insides. The
hole might have to be 12 inches square or whatever it takes to reach all
the
insides. Could possibly be done. After that, just fabricate an aluminum
plate for the hole and attach with flush screws. This is just a thought in
case many of us might have to make drastic changes due to ethanol or
whatever. I personally would rather consider this type approach than doing
a blanket tank change out.
Don Smythe
---
| | - The Matronics Kitfox-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?Kitfox-List |
|
|
|
| Back to top |
|
|
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum
|
Powered by phpBB © 2001, 2005 phpBB Group
|
Get Email Distribution Too!
FAQ
Search
Memberlist
Usergroups
Register
Profile
Log in to check your private messages
Log in
