hangar31a(at)earthlink.ne Guest
 
 
 
 
 
  | 
		
			
				 Posted: Fri Oct 19, 2012 6:42 am    Post subject: Jabiru 2200A engine for sale | 
				     | 
			 
			
				
  | 
			 
			
				Jabiru 2200A for sale. 8.2 hours TT since new, just broken in. I 
 bought a Kolb MK-IIIc with a run out Rotax 582 on it and decided to 
 replace it with the Jabiru engine. I flew the plane three times and 
 put the 8.2 hours on it. Since then I purchased an RV-9A and need the 
 hangar for that plane. I sold the Kolb to a local pilot that has a 
 Rotax 912 that he wants to install on the plane. He hasn't completed 
 the rebuild on the 912 yet so he is allowing me to keep the Jabiru on 
 the plane until it's done.  Therefore if you are interested in the 
 engine you can see it run.
 
 The engine has the two stage carb heater installed ($200). It has 
 stainless steel valve cover vent tubes. A Kolb factory engine mount 
 for the Jabiru, a Tennessee 64X36 prop (also with 8.2 hours on it). 
 The prop has the inlaid rubber "Uralite" leading edge which is a $70 
 extra. There is also a quick drain oil valve that hasn't yet been 
 installed but it goes with the engine.
 A new Jabiru 2200A costs $13,500 (plus tax and shipping). The carb 
 heater costs $200. The prop was $540 (plus shipping). The engine 
 mount was $450. and, not mentioned above, the alternator cover was 
 $75. This cover was made from an RV wheel pant and is aerodynamically 
 designed. It does not cover the mags to allow for max cooling however 
 it completely covers the alternator/flywheel assembly thereby keeping 
 the bugs and rain out. The Mk-IIIc flew right at 100mph (at full 
 power) with this setup. The total cost if you were to purchase the 
 engine new  with all the items listed above plus sales tax and 
 shipping would be over $15,000.  I will take just the price of the 
 engine ($13,500) which saves you over $1500 and you'll have a ready 
 to fly engine. If I need to ship it then you will have to add the 
 shipping costs and the cost of the shipping crate materials. I will 
 make the crate myself. (Email: hangar31a(at)earthlink.net)
 
  |  | - The Matronics JabiruEngine-List Email Forum - |  |   |  Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
 
  http://www.matronics.com/Navigator?JabiruEngine-List |  
  |  
 
 
 
 
  | 
			 
		  |