Matronics Email Lists :: View topic - CH601-HD baggage floor

Matronics Email Lists
Web Forum Interface to the Matronics Email Lists

Get Email Distribution Too! FAQ Search Memberlist Usergroups Register

Profile Log in to check your private messages Log in

CH601-HD baggage floor

Matronics Email Lists Forum Index -> Zenith-List

View previous topic :: View next topic

Author Message

carlossa52(at)gmail.com
Guest

Posted: Mon Oct 29, 2012 6:09 pm Post subject: CH601-HD baggage floor

Hello gang (assuming you are still out there...?)I am doing a trial fitting of the (CH601-HD) baggage floor. So far, everything fits nicely, rear fuse to centre wing, firewall, alignment, etc.   I am a bit puzzled by the baggage floor: it seems to be about 20 - 25 mm (one inch or so) too long: according to the plans, the baggage floor should end at the continuation of the seat's back (or 6F13-3, same thing).   

Did any of the HD(S) builders out there have to trim the from edge of the baggage floor?

I did a search of the archives, but did not find a similar case...  

Actually, I found someone's post talking about a "perfect fit" (i.e., trim required only to fit the longeron curve).

  

Comments/suggestions?



(PS: hope everyone is safe out there.)



Thanks

Carlos

CH601-HD, plans

rear fuse, centre wing, firewall in place



 

  [quote][b]

- The Matronics Zenith-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Zenith-List

carlossa52(at)gmail.com
Guest

Posted: Mon Oct 29, 2012 6:34 pm Post subject: CH601-HD baggage floor

Here's a picture, might help explain the situation.



On 29 October 2012 22:07, Carlos Sa <carlossa52(at)gmail.com (carlossa52(at)gmail.com)> wrote:

   	  Quote: 	
		  Hello gang (assuming you are still out there...?)  I am doing a trial fitting of the (CH601-HD) baggage floor. So far, everything fits nicely, rear fuse to centre wing, firewall, alignment, etc.     I am a bit puzzled by the baggage floor: it seems to be about 20 - 25 mm (one inch or so) too long: according to the plans, the baggage floor should end at the continuation of the seat's back (or 6F13-3, same thing).     

Did any of the HD(S) builders out there have to trim the from edge of the baggage floor?

I did a search of the archives, but did not find a similar case...  

Actually, I found someone's post talking about a "perfect fit" (i.e., trim required only to fit the longeron curve).

    

Comments/suggestions?



(PS: hope everyone is safe out there.)



Thanks

Carlos

CH601-HD, plans

rear fuse, centre wing, firewall in place



 

   	  Quote: 	
		  



arget="_blank">http://www.matronics.com/Navigator?Zenith-List

tp://forums.matronics.com

_blank">http://www.matronics.com/contribution

- The Matronics Zenith-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Zenith-List

baggage_floor.jpg

Description:

Filesize:

139.28 KB

Viewed:

3220 Time(s)

jlatimer1(at)cox.net
Guest

Posted: Tue Oct 30, 2012 7:33 am Post subject: CH601-HD baggage floor

Carlos,

  

 I don't recall having to trim 6F13-3.  I reviewed my  building log and photos from that time and there were no notes about having to  trim 25mm from the front edge.

  

 Jerry



   From: owner-zenith-list-server(at)matronics.com  [mailto:owner-zenith-list-server(at)matronics.com] On Behalf Of Carlos  Sa

Sent: Monday, October 29, 2012 7:08 PM

To:  zenith-list(at)matronics.com

Subject: CH601-HD baggage  floor

 

Hello gang (assuming you are still  out there...?)I am doing a trial  fitting of the (CH601-HD) baggage floor. So far, everything fits nicely, rear  fuse to centre wing, firewall, alignment, etc.I am a bit puzzled by the baggage floor: it seems to  be about 20 - 25 mm (one inch or so) too long: according to the plans, the  baggage floor should end at the continuation of the seat's back (or 6F13-3, same  thing).

Did any of the HD(S) builders out there have to  trim the from edge of the baggage floor?

I did a search of the archives, but  did not find a similar case...  

Actually, I found someone's post  talking about a "perfect fit" (i.e., trim required only to fit the longeron  curve).



Comments/suggestions?



(PS: hope everyone is safe out  there.)



Thanks

Carlos

CH601-HD, plans

rear fuse, centre  wing, firewall in place



   [quote][b]

- The Matronics Zenith-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Zenith-List

carlossa52(at)gmail.com
Guest

Posted: Tue Oct 30, 2012 7:50 am Post subject: CH601-HD baggage floor

Thanks, Jerry - It seems I am in a unusual situation.Maybe the seat back angle is off... I sent a note to ZAC, as this could be a symptom of some major issue..  Carlos



On 30 October 2012 11:32, Jerry Latimer <jlatimer1(at)cox.net (jlatimer1(at)cox.net)> wrote:

  [quote]     Carlos,

  

 I don't recall having to trim 6F13-3.  I reviewed my  building log and photos from that time and there were no notes about having to  trim 25mm from the front edge.

  

 Jerry



   From: owner-zenith-list-server(at)matronics.com (owner-zenith-list-server(at)matronics.com)  [mailto:owner-zenith-list-server(at)matronics.com (owner-zenith-list-server(at)matronics.com)] On Behalf Of Carlos  Sa

Sent: Monday, October 29, 2012 7:08 PM

To:  zenith-list(at)matronics.com (zenith-list(at)matronics.com)

Subject: CH601-HD baggage  floor

 

Hello gang (assuming you are still  out there...?)I am doing a trial  fitting of the (CH601-HD) baggage floor. So far, everything fits nicely, rear  fuse to centre wing, firewall, alignment, etc.I am a bit puzzled by the baggage floor: it seems to  be about 20 - 25 mm (one inch or so) too long: according to the plans, the  baggage floor should end at the continuation of the seat's back (or 6F13-3, same  thing).

Did any of the HD(S) builders out there have to  trim the from edge of the baggage floor?

I did a search of the archives, but  did not find a similar case...  

Actually, I found someone's post  talking about a "perfect fit" (i.e., trim required only to fit the longeron  curve).



Comments/suggestions?



(PS: hope everyone is safe out  there.)



Thanks

Carlos

CH601-HD, plans

rear fuse, centre  wing, firewall in place



    	  Quote: 	
		  



arget="_blank">http://www.matronics.com/Navigator?Zenith-List

tp://forums.matronics.com

_blank">http://www.matronics.com/contribution



	


[b]

- The Matronics Zenith-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Zenith-List

jlatimer1(at)cox.net
Guest

Posted: Tue Oct 30, 2012 8:06 am Post subject: CH601-HD baggage floor

Carlos,

 When I go to the airport next, I will measure the baggage  floor and see if I've removed some material from it.  I know I had to make  some modifications to rear turtle deck when I installed the front opening  canopy, but I don't think I had to trim the baggage floor.

 Jerry



   From: owner-zenith-list-server(at)matronics.com  [mailto:owner-zenith-list-server(at)matronics.com] On Behalf Of Carlos  Sa

Sent: Tuesday, October 30, 2012 8:49 AM

To:  zenith-list(at)matronics.com

Subject: Re: CH601-HD baggage  floor

 

Thanks, Jerry - It seems I am in a  unusual situation.Maybe the seat  back angle is off... I sent a note to ZAC, as this could be a symptom of some  major issue...Carlos



 On 30 October 2012 11:32, Jerry Latimer <jlatimer1(at)cox.net (jlatimer1(at)cox.net)> wrote:

 [quote]      Carlos,

    

   I don't recall    having to trim 6F13-3.  I reviewed my building log and photos from that    time and there were no notes about having to trim 25mm from the front    edge.

    

   Jerry



         From: owner-zenith-list-server(at)matronics.com (owner-zenith-list-server(at)matronics.com) [mailto:owner-zenith-list-server(at)matronics.com (owner-zenith-list-server(at)matronics.com)] On Behalf Of    Carlos Sa

Sent: Monday, October 29, 2012 7:08 PM

To:    zenith-list(at)matronics.com (zenith-list(at)matronics.com)

Subject: Zenith-List:    CH601-HD baggage floor

   

Hello gang (assuming you are    still out there...?)I am doing a    trial fitting of the (CH601-HD) baggage floor. So far, everything fits nicely,    rear fuse to centre wing, firewall, alignment, etc.I am a bit puzzled by the baggage floor: it seems    to be about 20 - 25 mm (one inch or so) too long: according to the plans, the    baggage floor should end at the continuation of the seat's back (or 6F13-3,    same thing).

Did any of the HD(S) builders out there have    to trim the from edge of the baggage floor?

I did a search of the archives,    but did not find a similar case...  

Actually, I found someone's post    talking about a "perfect fit" (i.e., trim required only to fit the longeron    curve).



Comments/suggestions?



(PS: hope everyone is safe out    there.)



Thanks

Carlos

CH601-HD, plans

rear fuse,    centre wing, firewall in place



 	  Quote: 	
		  



arget="_blank">http://www.matronics.com/Navigator?Zenith-List

tp://forums.matronics.com

_blank">http://www.matronics.com/contribution



	






href="http://www.matronics.com/Navigator?Zenith-List">http://www.matronhref="http://forums.matronics.com">http://forums.matronics.com

href="http://www.matronics.com/contribution">http://www.matronics.com/c

[b]

- The Matronics Zenith-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Zenith-List

Display posts from previous:

	Matronics Email Lists Forum Index -> Zenith-List	All times are GMT - 8 Hours
Page 1 of 1

Jump to:

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum