 |
Matronics Email Lists
Web Forum Interface to the Matronics Email Lists
|
| View previous topic :: View next topic |
| Author |
Message |
awcbs
Joined: 28 Sep 2010
Posts: 20
Location: kittanning, PA
|
 Posted: Sat Dec 28, 2013 6:39 am Post subject: Mark 3 582 engine mount needed |
 |
|
Looking for a 582 engine mount for or a mark 3.
Maybe someone has one laying around from an engine upgrade?
Thanks
Aj
| | - The Matronics Kolb-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?Kolb-List |
|
_________________
AJ Waldor
MK3C 503
Phantom 503
Rans S-9 Chaos 503 |
|
| Back to top |
|
 |
rowedenny
Joined: 09 Mar 2008
Posts: 338
Location: Western PA
|
| Posted: Sat Dec 28, 2013 11:01 am Post subject: Mark 3 582 engine mount needed |
|
|
AJ, Dave Lewis has an extra one I'm going to use on my 670, you are welcome to borrow it to trace it and I may even have some 1/4" plate laying around. Give me a call.
Dennis "Skid" Rowe
Mk3, 690L-70, Leechburg, PA
| Quote: | On Dec 28, 2013, at 9:39 AM, "awcbs" <awcbsone(at)windstream.net> wrote:
Looking for a 582 engine mount for or a mark 3.
Maybe someone has one laying around from an engine upgrade?
Thanks
Aj
--------
AJ Waldor
MK3C 503
Phantom 503
Rans S-9 Chaos 503
Read this topic online here:
http://forums.matronics.com/viewtopic.php?p=416270#416270
|
| | - The Matronics Kolb-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?Kolb-List |
|
|
|
| Back to top |
|
|
rickofudall
Joined: 19 Sep 2009
Posts: 1392
Location: Udall, KS, USA
|
| Posted: Sun Dec 29, 2013 8:25 am Post subject: Mark 3 582 engine mount needed |
|
|
AJ, The 503 and the 582 use the same bolt pattern, 153 X 94 mm.
Rick Girard
On Sat, Dec 28, 2013 at 8:39 AM, awcbs <awcbsone(at)windstream.net (awcbsone(at)windstream.net)> wrote:
| Quote: | --> Kolb-List message posted by: "awcbs" <awcbsone(at)windstream.net (awcbsone(at)windstream.net)>
Looking for a 582 engine mount for or a mark 3.
Maybe someone has one laying around from an engine upgrade?
Thanks
Aj
--------
AJ Waldor
MK3C 503
Phantom 503
Rans S-9 Chaos 503
Read this topic online here:
http://forums.matronics.com/viewtopic.php?p=416270#416270
===========
="_blank">www.aeroelectric.com
ooks.com" target="_blank">www.buildersbooks.com
et="_blank">www.homebuilthelp.com
et="_blank">www.mypilotstore.com
"_blank">www.mrrace.com
="_blank">http://www.matronics.com/contribution
le, List Admin.
===========
arget="_blank">http://www.matronics.com/Navigator?Kolb-List
===========
http://forums.matronics.com
===========
|
--
Zulu Delta
Mk IIIC
Thanks, Homer GBYM
It isn't necessary to have relatives in Kansas City in order to be unhappy.
- Groucho Marx
[quote][b]
| | - The Matronics Kolb-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?Kolb-List |
|
_________________
The smallest miracle right in front of you is enough to make you happy.... |
|
| Back to top |
|
|
rickofudall
Joined: 19 Sep 2009
Posts: 1392
Location: Udall, KS, USA
|
| Posted: Sun Dec 29, 2013 8:40 am Post subject: Mark 3 582 engine mount needed |
|
|
AJ, Thought of something else. The stock Kolb 503/582 mount plate will not work if you run an "E" gearbox. The starter motor and the Kolb motor mount frame interfere. The engine has to be moved aft 3/4" to gain minimal clearance. I have both plates in a CAD file that I can export in PDF format is you need them.
Rick
On Sun, Dec 29, 2013 at 10:25 AM, Richard Girard <aslsa.rng(at)gmail.com (aslsa.rng(at)gmail.com)> wrote:
| Quote: | AJ, The 503 and the 582 use the same bolt pattern, 153 X 94 mm.
Rick Girard
On Sat, Dec 28, 2013 at 8:39 AM, awcbs <awcbsone(at)windstream.net (awcbsone(at)windstream.net)> wrote:
| Quote: | --> Kolb-List message posted by: "awcbs" <awcbsone(at)windstream.net (awcbsone(at)windstream.net)>
Looking for a 582 engine mount for or a mark 3.
Maybe someone has one laying around from an engine upgrade?
Thanks
Aj
--------
AJ Waldor
MK3C 503
Phantom 503
Rans S-9 Chaos 503
Read this topic online here:
http://forums.matronics.com/viewtopic.php?p=416270#416270
===========
="_blank">www.aeroelectric.com
ooks.com" target="_blank">www.buildersbooks.com
et="_blank">www.homebuilthelp.com
et="_blank">www.mypilotstore.com
"_blank">www.mrrace.com
="_blank">http://www.matronics.com/contribution
le, List Admin.
===========
arget="_blank">http://www.matronics.com/Navigator?Kolb-List
===========
http://forums.matronics.com
===========
|
--
Zulu Delta
Mk IIIC
Thanks, Homer GBYM
It isn't necessary to have relatives in Kansas City in order to be unhappy.
- Groucho Marx
|
--
Zulu Delta
Mk IIIC
Thanks, Homer GBYM
It isn't necessary to have relatives in Kansas City in order to be unhappy.
- Groucho Marx
[quote][b]
| | - The Matronics Kolb-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?Kolb-List |
|
_________________
The smallest miracle right in front of you is enough to make you happy.... |
|
| Back to top |
|
|
rowedenny
Joined: 09 Mar 2008
Posts: 338
Location: Western PA
|
| Posted: Sun Dec 29, 2013 8:50 am Post subject: Mark 3 582 engine mount needed |
|
|
Funny you should mention this Richard. Dave just ran into this yesterday when mounting his E box to his 582 powered Slingshot. Definitely forward me the plans for the rearward engine plate as I'll also need to make one for my 670 as I am planning on using the E box also. AJ, looks like you nay have a good black anodized engine mount right in your back yard. Lol
Dennis "Skid" Rowe
Mk3, 690L-70, Leechburg, PA
[quote] On Dec 29, 2013, at 11:40 AM, Richard Girard <aslsa.rng(at)gmail.com> wrote:
AJ, Thought of something else. The stock Kolb 503/582 mount plate will not work if you run an "E" gearbox. The starter motor and the Kolb motor mount frame interfere. The engine has to be moved aft 3/4" to gain minimal clearance.
I have both plates in a CAD file that I can export in PDF format is you need them.
Rick
> On Sun, Dec 29, 2013 at 10:25 AM, Richard Girard <aslsa.rng(at)gmail.com> wrote:
> AJ, The 503 and the 582 use the same bolt pattern, 153 X 94 mm.
>
> Rick Girard
>
>
>> On Sat, Dec 28, 2013 at 8:39 AM, awcbs <awcbsone(at)windstream.net> wrote:
>>
>>
>> Looking for a 582 engine mount for or a mark 3.
>> Maybe someone has one laying around from an engine upgrade?
>> Thanks
>> Aj
>>
>> --------
>> AJ Waldor
>> MK3C 503
>> Phantom 503
>> Rans S-9 Chaos 503
>>
>>
>>
>>
>> Read this topic online here:
>>
>> http://forums.matronics.com/viewtopic.php?p=416270#416270
>>
>>
>>
>>
>>
>>
>>
>> ===========
>> ="_blank">www.aeroelectric.com
>> ooks.com" target="_blank">www.buildersbooks.com
>> et="_blank">www.homebuilthelp.com
>> et="_blank">www.mypilotstore.com
>> "_blank">www.mrrace.com
>> ="_blank">http://www.matronics.com/contribution
>> le, List Admin.
>> ===========
>> arget="_blank">http://www.matronics.com/Navigator?Kolb-List
>> ===========
>> http://forums.matronics.com
>> ===========
>
>
>
> --
> Zulu Delta
> Mk IIIC
> Thanks, Homer GBYM
>
> It isn't necessary to have relatives in Kansas City in order to be unhappy.
> - Groucho Marx
--
Zulu Delta
Mk IIIC
Thanks, Homer GBYM
It isn't necessary to have relatives in Kansas City in order to be unhappy
| | - The Matronics Kolb-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?Kolb-List |
|
|
|
| Back to top |
|
|
rowedenny
Joined: 09 Mar 2008
Posts: 338
Location: Western PA
|
| Posted: Sun Dec 29, 2013 8:57 am Post subject: Mark 3 582 engine mount needed |
|
|
Looks like a good project for my youngest boys Vo-Tech machinist class.
Dennis "Skid" Rowe
Mk3, 690L-70, Leechburg, PA
[quote] On Dec 29, 2013, at 11:40 AM, Richard Girard <aslsa.rng(at)gmail.com> wrote:
AJ, Thought of something else. The stock Kolb 503/582 mount plate will not work if you run an "E" gearbox. The starter motor and the Kolb motor mount frame interfere. The engine has to be moved aft 3/4" to gain minimal clearance.
I have both plates in a CAD file that I can export in PDF format is you need them.
Rick
> On Sun, Dec 29, 2013 at 10:25 AM, Richard Girard <aslsa.rng(at)gmail.com> wrote:
> AJ, The 503 and the 582 use the same bolt pattern, 153 X 94 mm.
>
> Rick Girard
>
>
>> On Sat, Dec 28, 2013 at 8:39 AM, awcbs <awcbsone(at)windstream.net> wrote:
>>
>>
>> Looking for a 582 engine mount for or a mark 3.
>> Maybe someone has one laying around from an engine upgrade?
>> Thanks
>> Aj
>>
>> --------
>> AJ Waldor
>> MK3C 503
>> Phantom 503
>> Rans S-9 Chaos 503
>>
>>
>>
>>
>> Read this topic online here:
>>
>> http://forums.matronics.com/viewtopic.php?p=416270#416270
>>
>>
>>
>>
>>
>>
>>
>> ===========
>> ="_blank">www.aeroelectric.com
>> ooks.com" target="_blank">www.buildersbooks.com
>> et="_blank">www.homebuilthelp.com
>> et="_blank">www.mypilotstore.com
>> "_blank">www.mrrace.com
>> ="_blank">http://www.matronics.com/contribution
>> le, List Admin.
>> ===========
>> arget="_blank">http://www.matronics.com/Navigator?Kolb-List
>> ===========
>> http://forums.matronics.com
>> ===========
>
>
>
> --
> Zulu Delta
> Mk IIIC
> Thanks, Homer GBYM
>
> It isn't necessary to have relatives in Kansas City in order to be unhappy.
> - Groucho Marx
--
Zulu Delta
Mk IIIC
Thanks, Homer GBYM
It isn't necessary to have relatives in Kansas City in order to be unhappy
| | - The Matronics Kolb-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?Kolb-List |
|
|
|
| Back to top |
|
|
rickofudall
Joined: 19 Sep 2009
Posts: 1392
Location: Udall, KS, USA
|
| Posted: Sun Dec 29, 2013 10:34 am Post subject: Mark 3 582 engine mount needed |
|
|
Dennis, Here you go. Note that all dimensions are from the center of the Kolb engine mount on the frame. All the radius centers outside the periphery of the plate are offset for a 1" hole saw.
Rick
On Sun, Dec 29, 2013 at 10:49 AM, Dennis Rowe <rowedenny(at)windstream.net (rowedenny(at)windstream.net)> wrote:
| Quote: | Funny you should mention this Richard. Dave just ran into this yesterday when mounting his E box to his 582 powered Slingshot. Definitely forward me the plans for the rearward engine plate as I'll also need to make one for my 670 as I am planning on using the E box also. AJ, looks like you nay have a good black anodized engine mount right in your back yard. Lol
Dennis "Skid" RoweMk3, 690L-70, Leechburg, PA
On Dec 29, 2013, at 11:40 AM, Richard Girard <aslsa.rng(at)gmail.com (aslsa.rng(at)gmail.com)> wrote:
| Quote: | AJ, Thought of something else. The stock Kolb 503/582 mount plate will not work if you run an "E" gearbox. The starter motor and the Kolb motor mount frame interfere. The engine has to be moved aft 3/4" to gain minimal clearance. I have both plates in a CAD file that I can export in PDF format is you need them.
Rick
On Sun, Dec 29, 2013 at 10:25 AM, Richard Girard <aslsa.rng(at)gmail.com (aslsa.rng(at)gmail.com)> wrote:
| Quote: | AJ, The 503 and the 582 use the same bolt pattern, 153 X 94 mm.
Rick Girard
On Sat, Dec 28, 2013 at 8:39 AM, awcbs <awcbsone(at)windstream.net (awcbsone(at)windstream.net)> wrote:
--
Zulu Delta
Mk IIIC
Thanks, Homer GBYM
It isn't necessary to have relatives in Kansas City in order to be unhappy.
- Groucho Marx
|
--
Zulu Delta
Mk IIIC
Thanks, Homer GBYM
It isn't necessary to have relatives in Kansas City in order to be unhappy.
- Groucho Marx
3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D
3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D
3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D
3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D
|
|
--
Zulu Delta
Mk IIIC
Thanks, Homer GBYM
It isn't necessary to have relatives in Kansas City in order to be unhappy.
- Groucho Marx
| | - The Matronics Kolb-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?Kolb-List |
|
| Description: |
|
Download |
| Filename: |
Engine_mount_plate_582E_2.pdf |
| Filesize: |
11.13 KB |
| Downloaded: |
359 Time(s) |
_________________
The smallest miracle right in front of you is enough to make you happy.... |
|
| Back to top |
|
|
awcbs
Joined: 28 Sep 2010
Posts: 20
Location: kittanning, PA
|
| Posted: Sun Dec 29, 2013 1:38 pm Post subject: Mark 3 582 engine mount needed |
|
|
Looks like I at least have one to copy or may end up with the one from Dave. Thanks guys.
Sent from my iPhone
On Dec 29, 2013, at 1:34 PM, Richard Girard <aslsa.rng(at)gmail.com> wrote:
[quote] Dennis, Here you go. Note that all dimensions are from the center of the Kolb engine mount on the frame. All the radius centers outside the periphery of the plate are offset for a 1" hole saw.
Rick
On Sun, Dec 29, 2013 at 10:49 AM, Dennis Rowe <rowedenny(at)windstream.net> wrote:
> Funny you should mention this Richard. Dave just ran into this yesterday when mounting his E box to his 582 powered Slingshot. Definitely forward me the plans for the rearward engine plate as I'll also need to make one for my 670 as I am planning on using the E box also. AJ, looks like you nay have a good black anodized engine mount right in your back yard. Lol
>
>
> Dennis "Skid" Rowe
> Mk3, 690L-70, Leechburg, PA
>
>
>
> On Dec 29, 2013, at 11:40 AM, Richard Girard <aslsa.rng(at)gmail.com> wrote:
>
>> AJ, Thought of something else. The stock Kolb 503/582 mount plate will not work if you run an "E" gearbox. The starter motor and the Kolb motor mount frame interfere. The engine has to be moved aft 3/4" to gain minimal clearance. I have both plates in a CAD file that I can export in PDF format is you need them.
>>
>> Rick
>>
>>
>> On Sun, Dec 29, 2013 at 10:25 AM, Richard Girard <aslsa.rng(at)gmail.com> wrote:
>>> AJ, The 503 and the 582 use the same bolt pattern, 153 X 94 mm.
>>>
>>> Rick Girard
>>>
>>>
>>> On Sat, Dec 28, 2013 at 8:39 AM, awcbs <awcbsone(at)windstream.net> wrote:
>>>>
>>>>
>>>> Looking for a 582 engine mount for or a mark 3.
>>>> Maybe someone has one laying around from an engine upgrade?
>>>> Thanks
>>>> Aj
>>>>
>>>> --------
>>>> AJ Waldor
>>>> MK3C 503
>>>> Phantom 503
>>>> Rans S-9 Chaos 503
>>>>
>>>>
>>>>
>>>>
>>>> Read this topic online here:
>>>>
>>>> http://forums.matronics.com/viewtopic.php?p=416270#416270
>>>>
>>>>
>>>>
>>>>
>>>>
>>>>
>>>>
>>>> ===========
>>>> ="_blank">www.aeroelectric.com
>>>> ooks.com" target="_blank">www.buildersbooks.com
>>>> et="_blank">www.homebuilthelp.com
>>>> et="_blank">www.mypilotstore.com
>>>> "_blank">www.mrrace.com
>>>> ="_blank">http://www.matronics.com/contribution
>>>> le, List Admin.
>>>> ===========
>>>> arget="_blank">http://www.matronics.com/Navigator?Kolb-List
>>>> ===========
>>>> http://forums.matronics.com
>>>> ===========
>>>
>>>
>>>
>>> --
>>> Zulu Delta
>>> Mk IIIC
>>> Thanks, Homer GBYM
>>>
>>> It isn't necessary to have relatives in Kansas City in order to be unhappy.
>>> - Groucho Marx
>>
>>
>>
>>
>> --
>> Zulu Delta
>> Mk IIIC
>> Thanks, Homer GBYM
>>
>> It isn't necessary to have relatives in Kansas City in order to be unhappy.
>> - Groucho Marx
>
>
>
> 3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D
> 3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D
> 3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D
> 3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D
--
Zulu Delta
Mk IIIC
Thanks, Homer GBYM
It isn't necessary to have relatives in Kansas City in order to be unhappy
| | - The Matronics Kolb-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?Kolb-List |
|
_________________
AJ Waldor
MK3C 503
Phantom 503
Rans S-9 Chaos 503 |
|
| Back to top |
|
|
awcbs
Joined: 28 Sep 2010
Posts: 20
Location: kittanning, PA
|
| Posted: Sun Dec 29, 2013 1:40 pm Post subject: Mark 3 582 engine mount needed |
|
|
Denny. May have to copy your steel gear legs also
Aj
Sent from my iPhone
On Dec 29, 2013, at 1:34 PM, Richard Girard <aslsa.rng(at)gmail.com> wrote:
[quote] Dennis, Here you go. Note that all dimensions are from the center of the Kolb engine mount on the frame. All the radius centers outside the periphery of the plate are offset for a 1" hole saw.
Rick
On Sun, Dec 29, 2013 at 10:49 AM, Dennis Rowe <rowedenny(at)windstream.net> wrote:
> Funny you should mention this Richard. Dave just ran into this yesterday when mounting his E box to his 582 powered Slingshot. Definitely forward me the plans for the rearward engine plate as I'll also need to make one for my 670 as I am planning on using the E box also. AJ, looks like you nay have a good black anodized engine mount right in your back yard. Lol
>
>
> Dennis "Skid" Rowe
> Mk3, 690L-70, Leechburg, PA
>
>
>
> On Dec 29, 2013, at 11:40 AM, Richard Girard <aslsa.rng(at)gmail.com> wrote:
>
>> AJ, Thought of something else. The stock Kolb 503/582 mount plate will not work if you run an "E" gearbox. The starter motor and the Kolb motor mount frame interfere. The engine has to be moved aft 3/4" to gain minimal clearance. I have both plates in a CAD file that I can export in PDF format is you need them.
>>
>> Rick
>>
>>
>> On Sun, Dec 29, 2013 at 10:25 AM, Richard Girard <aslsa.rng(at)gmail.com> wrote:
>>> AJ, The 503 and the 582 use the same bolt pattern, 153 X 94 mm.
>>>
>>> Rick Girard
>>>
>>>
>>> On Sat, Dec 28, 2013 at 8:39 AM, awcbs <awcbsone(at)windstream.net> wrote:
>>>>
>>>>
>>>> Looking for a 582 engine mount for or a mark 3.
>>>> Maybe someone has one laying around from an engine upgrade?
>>>> Thanks
>>>> Aj
>>>>
>>>> --------
>>>> AJ Waldor
>>>> MK3C 503
>>>> Phantom 503
>>>> Rans S-9 Chaos 503
>>>>
>>>>
>>>>
>>>>
>>>> Read this topic online here:
>>>>
>>>> http://forums.matronics.com/viewtopic.php?p=416270#416270
>>>>
>>>>
>>>>
>>>>
>>>>
>>>>
>>>>
>>>> ===========
>>>> ="_blank">www.aeroelectric.com
>>>> ooks.com" target="_blank">www.buildersbooks.com
>>>> et="_blank">www.homebuilthelp.com
>>>> et="_blank">www.mypilotstore.com
>>>> "_blank">www.mrrace.com
>>>> ="_blank">http://www.matronics.com/contribution
>>>> le, List Admin.
>>>> ===========
>>>> arget="_blank">http://www.matronics.com/Navigator?Kolb-List
>>>> ===========
>>>> http://forums.matronics.com
>>>> ===========
>>>
>>>
>>>
>>> --
>>> Zulu Delta
>>> Mk IIIC
>>> Thanks, Homer GBYM
>>>
>>> It isn't necessary to have relatives in Kansas City in order to be unhappy.
>>> - Groucho Marx
>>
>>
>>
>>
>> --
>> Zulu Delta
>> Mk IIIC
>> Thanks, Homer GBYM
>>
>> It isn't necessary to have relatives in Kansas City in order to be unhappy.
>> - Groucho Marx
>
>
>
> 3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D
> 3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D
> 3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D
> 3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D
--
Zulu Delta
Mk IIIC
Thanks, Homer GBYM
It isn't necessary to have relatives in Kansas City in order to be unhappy
| | - The Matronics Kolb-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?Kolb-List |
|
_________________
AJ Waldor
MK3C 503
Phantom 503
Rans S-9 Chaos 503 |
|
| Back to top |
|
|
rowedenny
Joined: 09 Mar 2008
Posts: 338
Location: Western PA
|
| Posted: Sun Dec 29, 2013 2:11 pm Post subject: Mark 3 582 engine mount needed |
|
|
No worries AJ
Dennis "Skid" RoweMk3, 690L-70, Leechburg, PA
On Dec 29, 2013, at 4:39 PM, Windstream <awcbsone(at)windstream.net (awcbsone(at)windstream.net)> wrote:
[quote]Denny. May have to copy your steel gear legs also
Aj
Sent from my iPhone
On Dec 29, 2013, at 1:34 PM, Richard Girard <aslsa.rng(at)gmail.com (aslsa.rng(at)gmail.com)> wrote:
| Quote: | Dennis, Here you go. Note that all dimensions are from the center of the Kolb engine mount on the frame. All the radius centers outside the periphery of the plate are offset for a 1" hole saw.
Rick
On Sun, Dec 29, 2013 at 10:49 AM, Dennis Rowe <rowedenny(at)windstream.net (rowedenny(at)windstream.net)> wrote:
| Quote: | Funny you should mention this Richard. Dave just ran into this yesterday when mounting his E box to his 582 powered Slingshot. Definitely forward me the plans for the rearward engine plate as I'll also need to make one for my 670 as I am planning on using the E box also. AJ, looks like you nay have a good black anodized engine mount right in your back yard. Lol
Dennis "Skid" RoweMk3, 690L-70, Leechburg, PA
On Dec 29, 2013, at 11:40 AM, Richard Girard <aslsa.rng(at)gmail.com (aslsa.rng(at)gmail.com)> wrote:
| Quote: | AJ, Thought of something else. The stock Kolb 503/582 mount plate will not work if you run an "E" gearbox. The starter motor and the Kolb motor mount frame interfere. The engine has to be moved aft 3/4" to gain minimal clearance. I have both plates in a CAD file that I can export in PDF format is you need them.
Rick
On Sun, Dec 29, 2013 at 10:25 AM, Richard Girard <aslsa.rng(at)gmail.com (aslsa.rng(at)gmail.com)> wrote:
| Quote: | AJ, The 503 and the 582 use the same bolt pattern, 153 X 94 mm.
Rick Girard
On Sat, Dec 28, 2013 at 8:39 AM, awcbs <awcbsone(at)windstream.net (awcbsone(at)windstream.net)> wrote:
--
Zulu Delta
Mk IIIC
Thanks, Homer GBYM
It isn't necessary to have relatives in Kansas City in order to be unhappy.
- Groucho Marx
|
--
Zulu Delta
Mk IIIC
Thanks, Homer GBYM
It isn't necessary to have relatives in Kansas City in order to be unhappy.
- Groucho Marx
3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D
3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D
3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D
3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D
|
|
--
Zulu Delta
Mk IIIC
Thanks, Homer GBYM
It isn't necessary to have relatives in Kansas City in order to be unhappy.
- Groucho Marx
<Engine mount plate 582E 2.pdf>
|
[b]
| | - The Matronics Kolb-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?Kolb-List |
|
|
|
| Back to top |
|
|
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum
|
Powered by phpBB © 2001, 2005 phpBB Group
|
Get Email Distribution Too!
FAQ
Search
Memberlist
Usergroups
Register
Profile
Log in to check your private messages
Log in
