Matronics Email Lists :: View topic - Broken louvre ring support rid

Matronics Email Lists
Web Forum Interface to the Matronics Email Lists

Get Email Distribution Too! FAQ Search Memberlist Usergroups Register

Profile Log in to check your private messages Log in

Broken louvre ring support rid

Matronics Email Lists Forum Index -> Yak-List

View previous topic :: View next topic

Author Message

wdjester(at)cox.net
Guest

Posted: Sat Jun 14, 2014 4:16 pm Post subject: Broken louvre ring support rid

All: I came back from a flight and found a cooling louver ring support Rod broken. Looking to see if anyone knows where I can get a replacement. Is the lower rod that supports the hook and wire that holds the lower calendar up when the cowling is open.  Pictures attached.



<pre><b><font size=3D2 color="#000000" face=3D"courier new,courier">

image.jpeg

Description:

Filesize:

512.21 KB

Viewed:

8937 Time(s)

image.jpeg

Description:

Filesize:

491.53 KB

Viewed:

8937 Time(s)

wdjester(at)cox.net
Guest

Posted: Sat Jun 14, 2014 4:22 pm Post subject: Broken louvre ring support rid

Make that cowling not calendar...gotta love auto correct.



Sent from my iPad



 	  Quote: 	
		   On Jun 14, 2014, at 7:15 PM, David Jester <wdjester(at)cox.net> wrote:

 

 All: I came back from a flight and found a cooling louver ring support Rod broken. Looking to see if anyone knows where I can get a replacement. Is the lower rod that supports the hook and wire that holds the lower calendar up when the cowling is open.  Pictures attached.

 <image.jpeg>

 

 

 <image.jpeg>

 

 

 <pre><b><font size=3D2 color="#000000" face=3D"courier new,courier">

 

 

 </b></font></pre>

wdjester(at)cox.net
Guest

Posted: Sat Jun 14, 2014 4:23 pm Post subject: Broken louvre ring support rid

And rod not ring.



Sent from my iPad



 	  Quote: 	
		   On Jun 14, 2014, at 7:15 PM, David Jester <wdjester(at)cox.net> wrote:

 

 All: I came back from a flight and found a cooling louver ring support Rod broken. Looking to see if anyone knows where I can get a replacement. Is the lower rod that supports the hook and wire that holds the lower calendar up when the cowling is open.  Pictures attached.

 <image.jpeg>

 

 

 <image.jpeg>

 

 

 <pre><b><font size=3D2 color="#000000" face=3D"courier new,courier">

 

 

 </b></font></pre>

wdjester(at)cox.net
Guest

Posted: Sat Jun 14, 2014 5:27 pm Post subject: Broken louvre ring support rid

Thanks Doug...need the one that hold up the hook and wire on the lower cowling. See photo and thanks again...



Sent from my iPad



On Jun 14, 2014, at 7:55 PM, doug sapp <dougsappllc(at)gmail.com (dougsappllc(at)gmail.com)> wrote:

[quote]

Dave,

 In stock, back in the office on monday. On Jun 14, 2014 5:23 PM, "David Jester" <wdjester(at)cox.net (wdjester(at)cox.net)> wrote: 	  Quote: 	
		   All: I came back from a flight and found a cooling louver ring support Rod broken. Looking to see if anyone knows where I can get a replacement. Is the lower rod that supports the hook and wire that holds the lower calendar up when the cowling is open. Â Pictures attached.

 

 

 



 

 <pre><b><font size=3D2 color="#000000" face=3D"courier new,courier">

 

 3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D

 com/Navigator?Yak-List" target="_blank">http://www.matronics.com/Navigator?Yak-List">http://www.matronics.com/Navigator?Yak-List</a>

  3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D

 RUMS -

 cs.com" target="_blank">http://forums.matronics.com">http://forums.matronics.com</a>

  3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D

 ite -

   Â  Â  Â  Â  Â -Matt Dralle, List Admin.

 com/contribution" target="_blank">http://www.matronics.com/contribution">http://www.matronics.com/contribution</a>

  3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D

 

 </b></font></pre></body></html>





D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D

ist"">http://www.matronics.com/Navigator?Yak-List

D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D

//forums.matronics.com

D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D

ot;">http://www.matronics.com/contribution

D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D



	


[b]

javiercarrascob

Joined: 06 Sep 2009
Posts: 62
Location: Virginia

Posted: Sat Jun 14, 2014 6:47 pm Post subject: Broken louvre ring support rid

Hi David,

My Yak needs them repair every now and then, I had one rebuild by the local AP when that happens.

Javier



        From: David Jester <wdjester(at)cox.net>

 To: yak-list <yak-list(at)matronics.com> 

 Sent: Saturday, June 14, 2014 8:15 PM

 Subject: Broken louvre ring support rid

  

 

All: I came back from a flight and  found a cooling louver ring support Rod broken. Looking to see if anyone knows where I can get a replacement. Is the lower rod that supports the hook and wire that holds the lower calendar up when the cowling is open.  Pictures attached.



<pre><b><font size=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D

_://www.matronics.com/Navigator?Yak-List"  target="_blank">http://www.matronics.com/Navigator?Yak-List">http:=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D

_-=3D               - MATRONICS WEB FORtronics.com/" target="_blank">http://forums.matronics.com">http://www.matronics.com/contribution">http://www.matronics.com/contribution</a>

_-=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D



</b></font></pre></body></html>

 

 

  

 [quote][b]

Viperdoc

Joined: 19 Apr 2014
Posts: 484
Location: 08A

Posted: Sat Jun 14, 2014 8:03 pm Post subject: Broken louvre ring support rid

The CJ rods fit the YAK. Call doug Sapp.

Doc



Sent from my iPad



 	  Quote: 	
		   On Jun 14, 2014, at 7:22 PM, Dave Jester <wdjester(at)cox.net> wrote:

 

 

 

 Make that cowling not calendar...gotta love auto correct.

 

 Sent from my iPad

 

> On Jun 14, 2014, at 7:15 PM, David Jester <wdjester(at)cox.net> wrote:

> 

> All: I came back from a flight and found a cooling louver ring support Rod broken. Looking to see if anyone knows where I can get a replacement. Is the lower rod that supports the hook and wire that holds the lower calendar up when the cowling is open.  Pictures attached.

> <image.jpeg>

> 

> 

> <image.jpeg>

> 

> 

> <pre><b><font size=3D2 color="#000000" face=3D"courier new,courier">

> 

> 

> </b></font></pre>

_________________
Viperdoc

Viperdoc

Joined: 19 Apr 2014
Posts: 484
Location: 08A

Posted: Sat Jun 14, 2014 8:05 pm Post subject: Broken louvre ring support rid

Call Doig. A lot cheaper than machining another one

Doc 



Sent from my iPad



On Jun 14, 2014, at 9:47 PM, Javier Carrasco <javiercarrascob(at)yahoo.com (javiercarrascob(at)yahoo.com)> wrote:

 	  Quote: 	
		  Hi David,

My Yak needs them repair every now and then, I had one rebuild by the local AP when that happens.

Javier



        From: David Jester <wdjester(at)cox.net (wdjester(at)cox.net)>

 To: yak-list <yak-list(at)matronics.com (yak-list(at)matronics.com)> 

 Sent: Saturday, June 14, 2014 8:15 PM

 Subject: Broken louvre ring support rid

  

 

All: I came back from a flight and  found a cooling louver ring support Rod broken. Looking to see if anyone knows where I can get a replacement. Is the lower rod that supports the hook and wire that holds the lower calendar up when the cowling is open.  Pictures attached.



<pre><b><font size=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D

_://www.matronics.com/Navigator?Yak-List"  target="_blank">http://www.matronics.com/Navigator?Yak-List">http:=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3;          - MATRONICS WEB FORtronics.com/" target="_blank">http://forums.matronics.com">http://www.matronics.com/contribution">http://www.matronics.com/contribution



D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D

ist"">http://www.matronics.com/Navigator?Yak-List

D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D

//forums.matronics.com

D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D

ot;">http://www.matronics.com/contribution

D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D



[/b] 	


[/quote]

_________________
Viperdoc

dsavarese0812(at)bellsout
Guest

Posted: Sun Jun 15, 2014 5:08 am Post subject: Broken louvre ring support rid

Unless I am mistaken, the CJ rods are the same as the ones on the Yak 50, but not exactly the same as the 52's.  The difference is the 52's rods have a slotted, countersunk end at the louver ring outside end (which makes them fit flush to the ring) and the CJ's are simply a flattened rod.  



Dave Jester, take a look at the end of the rods around the outside of the ring on your 52 and then go look at the rods on your neighbor's CJ's ring.

Dennis  



  

      From: Roger Kemp <f16viperdoc(at)me.com> To: "yak-list(at)matronics.com"  <yak-list(at)matronics.com>  Sent: Saturday, June 14, 2014 11:02 PM Subject: Re: Broken louvre ring support rid  

 --> Yak-List message posted by: Roger Kemp <f16viperdoc(at)me.com (f16viperdoc(at)me.com)>The CJ rods fit the YAK. Call doug Sapp.DocSent from my iPad> On Jun 14, 2014, at 7:22 PM, Dave Jester <wdjester(at)cox.net (wdjester(at)cox.net)> wrote:> > --> Yak-List  message posted by: Dave Jester <wdjester(at)cox.net (wdjester(at)cox.net)>> > Make that cowling not calendar...gotta love auto correct.> > Sent from my iPad> >> On Jun 14,  2014, at 7:15 PM, David Jester <wdjester(at)cox.net (wdjester(at)cox.net)> wrote:>> >> All: I came back from a flight and found a cooling louver ring support Rod broken. Looking to see if anyone knows where I can get a replacement. Is the lower rod that supports the hook and wire that holds the lower calendar up when the cowling is open.  Pictures attached.>> <image.jpeg>>> >> >> <image.jpeg>>> >> >> <pre><b><font size=3D2 color="#000000" face=3D"courier new,courier">>> >> >> </b></font></pre>> >  > > > http://www.matronics.com/Navigator?Yak-List

 

 



  



 [quote][b]

wdjester(at)cox.net
Guest

Posted: Sun Jun 15, 2014 5:13 am Post subject: Broken louvre ring support rid

Thanks all...Doug has replacements.   



Sent from my iPad



 	  Quote: 	
		   On Jun 14, 2014, at 11:02 PM, Roger Kemp <f16viperdoc(at)me.com> wrote:

 

 

 

 The CJ rods fit the YAK. Call doug Sapp.

 Doc

 

 Sent from my iPad

 

> On Jun 14, 2014, at 7:22 PM, Dave Jester <wdjester(at)cox.net> wrote:

> 

> 

> 

> Make that cowling not calendar...gotta love auto correct.

> 

> Sent from my iPad

> 

>> On Jun 14, 2014, at 7:15 PM, David Jester <wdjester(at)cox.net> wrote:

>> 

>> All: I came back from a flight and found a cooling louver ring support Rod broken. Looking to see if anyone knows where I can get a replacement. Is the lower rod that supports the hook and wire that holds the lower calendar up when the cowling is open.  Pictures attached.

>> <image.jpeg>

>> 

>> 

>> <image.jpeg>

>> 

>> 

>> <pre><b><font size=3D2 color="#000000" face=3D"courier new,courier">

>> 

>> 

>> </b></font></pre>

dsavarese0812(at)bellsout
Guest

Posted: Sun Jun 15, 2014 5:24 am Post subject: Broken louvre ring support rid

Oops!  I was         thinking it was a LOUVER rod.  Not the adjustable ring brace rod.

       Sorry for my misunderstanding.

       Dennis

        	  Quote: 	
		  A. Dennis Savarese

334-285-6263

334-546-8182 (mobile)

www.yak-52.com

Skype - Yakguy1 	
       On 6/15/2014 8:04 AM, A. Dennis Savarese wrote:

     

      	  Quote: 	
		                                                         Unless                   I am mistaken, the CJ rods are the same as the ones on                   the Yak 50, but not exactly the same as the 52's.  The                   difference is the 52's rods have a slotted,                   countersunk end at the louver ring outside end (which                   makes them fit flush to the ring) and the CJ's are                   simply a flattened rod.  

                   

                   Dave Jester, take a look at the end of the rods around                   the outside of the ring on your 52 and then go look at                   the rods on your neighbor's CJ's ring.

                   Dennis                   

                              

               

                 

               

                                                                                                 From:                         Roger Kemp <f16viperdoc(at)me.com> (f16viperdoc(at)me.com)                         To:                         "yak-list(at)matronics.com" (yak-list(at)matronics.com)                         <yak-list(at)matronics.com> (yak-list(at)matronics.com)                          Sent:                         Saturday, June 14, 2014 11:02 PM                         Subject:                         Re: Broken louvre ring support rid                        

                                            --> Yak-List message posted by: Roger Kemp <f16viperdoc(at)me.com (f16viperdoc(at)me.com)>                                              The CJ rods fit the YAK. Call doug Sapp.                       Doc                                              Sent from my iPad                                              > On Jun 14, 2014, at 7:22 PM, Dave Jester <wdjester(at)cox.net (wdjester(at)cox.net)>                       wrote:                       >                        > --> Yak-List message posted by: Dave                       Jester <wdjester(at)cox.net (wdjester(at)cox.net)>                       >                        > Make that cowling not calendar...gotta love                       auto correct.                       >                        > Sent from my iPad                       >                        >> On Jun 14, 2014, at 7:15 PM, David Jester                       <wdjester(at)cox.net (wdjester(at)cox.net)>                       wrote:                       >>                        >> All: I came back from a flight and found                       a cooling louver ring support Rod broken. Looking                       to see if anyone knows where I can get a                       replacement. Is the lower rod that supports the                       hook and wire that holds the lower calendar up                       when the cowling is open.  Pictures attached.                       >> <image.jpeg>                       >>                        >>                        >> <image.jpeg>                       >>                        >>                        >> <pre><b><font size=3D2                       color="#000000" face=3D"courier new,courier">                       >>                        >>                        >> </b></font></pre>                       >                        >                        >                        >                        > http://www.matronics.com/Navigator?Yak-List                                                                                                                                                    

[/b] 	
     [b]

Viperdoc

Joined: 19 Apr 2014
Posts: 484
Location: 08A

Posted: Sun Jun 15, 2014 6:52 am Post subject: Broken louvre ring support rid

Correct Dennis. The YAK 50 louver axels are different and are not interchangeable with the 52. The ring braces rods and ends are though.

Doug has them. I keep a couple of spares just incase. The straight and the 45 degree ones.

Doc



Sent from my iPad



On Jun 15, 2014, at 8:24 AM, "A. Dennis Savarese" <dsavarese0812(at)bellsouth.net (dsavarese0812(at)bellsouth.net)> wrote:

 	  Quote: 	
		                     Oops!  I was         thinking it was a LOUVER rod.  Not the adjustable ring brace rod.

       Sorry for my misunderstanding.

       Dennis

        	  Quote: 	
		  A. Dennis Savarese

334-285-6263

334-546-8182 (mobile)

www.yak-52.com

Skype - Yakguy1 	
       On 6/15/2014 8:04 AM, A. Dennis Savarese wrote:

     

      	  Quote: 	
		                                                         Unless                   I am mistaken, the CJ rods are the same as the ones on                   the Yak 50, but not exactly the same as the 52's.  The                   difference is the 52's rods have a slotted,                   countersunk end at the louver ring outside end (which                   makes them fit flush to the ring) and the CJ's are                   simply a flattened rod.  

                   

                   Dave Jester, take a look at the end of the rods around                   the outside of the ring on your 52 and then go look at                   the rods on your neighbor's CJ's ring.

                   Dennis                   

                              

               

                 

               

                                                                                                 From:                         Roger Kemp <f16viperdoc(at)me.com> (f16viperdoc(at)me.com)                         To:                         "yak-list(at)matronics.com" (yak-list(at)matronics.com)                         <yak-list(at)matronics.com> (yak-list(at)matronics.com)                          Sent:                         Saturday, June 14, 2014 11:02 PM                         Subject:                         Re: Broken louvre ring support rid                        

                                            --> Yak-List message posted by: Roger Kemp <f16viperdoc(at)me.com (f16viperdoc(at)me.com)>                                              The CJ rods fit the YAK. Call doug Sapp.                       Doc                                              Sent from my iPad                                              > On Jun 14, 2014, at 7:22 PM, Dave Jester <wdjester(at)cox.net (wdjester(at)cox.net)>                       wrote:                       >                        > --> Yak-List message posted by: Dave                       Jester <wdjester(at)cox.net (wdjester(at)cox.net)>                       >                        > Make that cowling not calendar...gotta love                       auto correct.                       >                        > Sent from my iPad                       >                        >> On Jun 14, 2014, at 7:15 PM, David Jester                       <wdjester(at)cox.net (wdjester(at)cox.net)>                       wrote:                       >>                        >> All: I came back from a flight and found                       a cooling louver ring support Rod broken. Looking                       to see if anyone knows where I can get a                       replacement. Is the lower rod that supports the                       hook and wire that holds the lower calendar up                       when the cowling is open.  Pictures attached.                       >> <image.jpeg>                       >>                        >>                        >> <image.jpeg>                       >>                        >>                        >> <pre><b><font size=3D2                       color="#000000" face=3D"courier new,courier">                       >>                        >>                        >> </b></font></pre>                       >                        >                        >                        >                        > http://www.matronics.com/Navigator?Yak-List                                                                                                                                                    

[/b] 	
     

	


[/quote]

_________________
Viperdoc

Display posts from previous:

	Matronics Email Lists Forum Index -> Yak-List	All times are GMT - 8 Hours
Page 1 of 1

Jump to:

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum