Matronics Email Lists :: View topic - KIS TR-4 Control Surfaces Deflections

Matronics Email Lists
Web Forum Interface to the Matronics Email Lists

Get Email Distribution Too! FAQ Search Memberlist Usergroups Register

Profile Log in to check your private messages Log in

KIS TR-4 Control Surfaces Deflections

Matronics Email Lists Forum Index -> KIS-List

View previous topic :: View next topic

Author Message

fasilpereira

Joined: 17 Jul 2011
Posts: 86
Location: Brazil

Posted: Fri Jul 04, 2014 7:59 am Post subject: KIS TR-4 Control Surfaces Deflections

I'm working on my ailerons mass balance now. I had to build new ones since the ones that came with my partially built kit had the bolt holes enlarged by the previous builder, making it too weak for my standards...



After building new ones and using the same holes on the ailerons, I've got about 7.5 deg DN and 17.5 Deg UP on my ailerons. I remember to read on the builders manual that the aileron deflection is usually limited to 8 to 9 DN and to 13 to 14 UP and that this should be sufficient.



Based on this, I think that my aileron DN deflection is not enough and that I have margin on the UP deflection. Now I'm planning to rework the mass balance in order to correct this issue.



I'd like to know what are the typical control surfaces deflections (Ailerons, Flap, Elevator, Rudder and Trim tabs) on the KIS TR-4 so that I can compare my measurements.



Thanks,



Fabricio

- The Matronics KIS-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?KIS-List

_________________
Fabricio Pereira
Engineer / Pilot

Display posts from previous:

	Matronics Email Lists Forum Index -> KIS-List	All times are GMT - 8 Hours
Page 1 of 1

Jump to:

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum