Matronics Email Lists :: View topic - Spinner Position Reference Info

Matronics Email Lists
Web Forum Interface to the Matronics Email Lists

Get Email Distribution Too! FAQ Search Memberlist Usergroups Register

Profile Log in to check your private messages Log in

Spinner Position Reference Info

Matronics Email Lists Forum Index -> RV10-List

View previous topic :: View next topic

Author Message

bcondrey(at)cox.net
Guest

Posted: Sat Jul 01, 2006 10:57 am Post subject: Spinner Position Reference Info

I've had a request for some measurements and thought I'd post for all.  The

installation of the upper and lower cowl halves is referenced to the aft

edge of the spinner.  Several folks have made a spacer and a plywood disk to

simulate this but measurements are difficult to locate.  My prop is on the

plane at the moment so each measurement is referenced to a location on the

flywheel assembly.  Caution: I'm not sure how much variability there is in

the flywheel assembly.



spinner aft edge to forward face of flywheel (at crankshaft flange): 1

18/32" 

spinner aft edge to forward edge of ring gear: 3 1/32" 

spinner aft edge to aft edge of ring gear: 3 15/32"

   Ring gear aligned with aft edge of flywheel.



Bob #40105

- The Matronics RV10-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?RV10-List

Display posts from previous:

	Matronics Email Lists Forum Index -> RV10-List	All times are GMT - 8 Hours
Page 1 of 1

Jump to:

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum