Matronics Email Lists Forum Index Matronics Email Lists
Web Forum Interface to the Matronics Email Lists
 
 Get Email Distribution Too!Get Email Distribution Too!    FAQFAQ   SearchSearch   MemberlistMemberlist   UsergroupsUsergroups   RegisterRegister 
 ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 

Yak 52 Exhaust

 
Post new topic   Reply to topic    Matronics Email Lists Forum Index -> Yak-List
View previous topic :: View next topic  
Author Message
Snazpappy



Joined: 01 Jan 2019
Posts: 33
PostPosted: Wed Mar 13, 2019 3:21 pm    Post subject: Yak 52 Exhaust Reply with quote
I get a lot of leaks from my exhaust joints on Yak 52tw. Instead of the stainless steel shims would there be a problem with wrapping the joint with exhaust pipe fiberglass wrap,then put the exhaust donut on top and fasten with the exhaust clamp? Also does anyone know what kind of temperatures that the exhaust pipes can reach?

Thanks

Snaz

- The Matronics Yak-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Yak-List
Back to top
View user's profile Send private message
n13472(at)aol.com
Guest
PostPosted: Wed Mar 13, 2019 3:35 pm    Post subject: Yak 52 Exhaust Reply with quote
Can not say about the pipe temp but see 1350 or so on the EGT sometimes when
finding peak.
Tom Elliott
CJ-6A NX63727
777 Quartz Ave
PMB 7004
Sandy Valley NV.
89019
Cell 541-297-5497
N13472(at)AOL.COM

--

- The Matronics Yak-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Yak-List
Back to top
bwade154(at)yahoo.com
Guest
PostPosted: Wed Mar 13, 2019 3:53 pm    Post subject: Yak 52 Exhaust Reply with quote
Well at night the exhaust glows red and there is a pretty blue flame that extends about 6 inches from the bottom port at full throttle.



On Wednesday, March 13, 2019, 07:33:36 PM EDT, Snazpappy <snazman1(at)hotmail.com> wrote:




--> Yak-List message posted by: "Snazpappy" <snazman1(at)hotmail.com (snazman1(at)hotmail.com)>

I get a lot of leaks from my exhaust joints on Yak 52tw. Instead of the stainless steel shims would there be a problem with wrapping the joint with exhaust pipe fiberglass wrap,then put the exhaust donut on top and fasten with the exhaust clamp? Also does anyone know what kind of temperatures that the exhaust pipes can reach?

Thanks

Snaz

ell at night the exaust glows red and there is a pretty blue flame that exteneds about 6 inches
Read this topic online here:

http://forums.matronics.com/viewtopic.php?p=488056#488056


</==================

http://www.matronics.com/Navigator - MATRONICS WEB FORUMS -

/wiki.matronics.com" target="_blank" rel="nofollow">http://wiki.matroni=======================
</; &nb --> http://www.matronics.com/contribution

- The Matronics Yak-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Yak-List
Back to top
Viperdoc



Joined: 19 Apr 2014
Posts: 484
Location: 08A
PostPosted: Thu Mar 14, 2019 3:57 pm    Post subject: Yak 52 Exhaust Reply with quote
I wrapped my joints with 0.015 SS Shim Tape. Need to put about four laps around the joint then apply the exhaust clamp.https://www.zoro.com/precision-brand-shim-stock-roll-cold-low-steel-00015-in-16155/i/G2606335/feature-product?gclid=EAIaIQobChMI1LWbiemC4QIVCIzICh0p5g-kEAQYASABEgI5QfD_BwE
Doc
Credit goes to Dennis Savarese for showing me that trick.
Sent from my iPad

On Mar 13, 2019, at 6:21 PM, Snazpappy <snazman1(at)hotmail.com (snazman1(at)hotmail.com)> wrote:
Quote:
--> Yak-List message posted by: "Snazpappy" <snazman1(at)hotmail.com (snazman1(at)hotmail.com)>

I get a lot of leaks from my exhaust joints on Yak 52tw. Instead of the stainless steel shims would there be a problem with wrapping the joint with exhaust pipe fiberglass wrap,then put the exhaust donut on top and fasten with the exhaust clamp? Also does anyone know what kind of temperatures that the exhaust pipes can reach?

Thanks

Snaz


Read this topic online here:

http://forums.matronics.com/viewtopic.php?p=488056#488056
http://www.matro====================================================; - MATRONICS WEB FORUMS -
http://www.matro=================================================




- The Matronics Yak-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Yak-List

_________________
Viperdoc
Back to top
View user's profile Send private message
cd001633(at)mindspring.co
Guest
PostPosted: Thu Mar 14, 2019 5:43 pm    Post subject: Yak 52 Exhaust Reply with quote
Snaz,

See the link attached.  That what I used, and it worked great.  It’s compressible and will ‘give’ and seal well.   I used the 1” width version of this.

https://www.amazon.com/WHITE-Temperature-Header-Exhaust-Insulation/dp/B003RBF2OS


FWIW,

Sam Sax

From: owner-yak-list-server(at)matronics.com <owner-yak-list-server(at)matronics.com> On Behalf Of Roger Kemp
Sent: Thursday, March 14, 2019 7:55 PM
To: yak-list(at)matronics.com
Subject: Re: Yak 52 Exhaust

I wrapped my joints with 0.015 SS Shim Tape. Need to put about four laps around the joint then apply the exhaust clamp.
https://www.zoro.com/precision-brand-shim-stock-roll-cold-low-steel-00015-in-16155/i/G2606335/feature-product?gclid=EAIaIQobChMI1LWbiemC4QIVCIzICh0p5g-kEAQYASABEgI5QfD_BwE



Doc



Credit goes to Dennis Savarese for showing me that trick.


Sent from my iPad
On Mar 13, 2019, at 6:21 PM, Snazpappy <snazman1(at)hotmail.com (snazman1(at)hotmail.com)> wrote:
Quote:

--> Yak-List message posted by: "Snazpappy" <snazman1(at)hotmail.com (snazman1(at)hotmail.com)>

I get a lot of leaks from my exhaust joints on Yak 52tw. Instead of the stainless steel shims would there be a problem with wrapping the joint with exhaust pipe fiberglass wrap,then put the exhaust donut on top and fasten with the exhaust clamp? Also does anyone know what kind of temperatures that the exhaust pipes can reach?

Thanks

Snaz


Read this topic online here:

http://forums.matronics.com/viewtopic.php?p=488056#488056
http://www.matro==; - MATRONICS WEB FORUMS -
<spasp; &nbspsp;--> http://www.matro========================





- The Matronics Yak-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Yak-List
Back to top
Display posts from previous:   
Post new topic   Reply to topic    Matronics Email Lists Forum Index -> Yak-List All times are GMT - 8 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum


Powered by phpBB © 2001, 2005 phpBB Group