 |
Matronics Email Lists
Web Forum Interface to the Matronics Email Lists
|
| View previous topic :: View next topic |
| Author |
Message |
hgmckay
Joined: 23 May 2006
Posts: 397
|
 Posted: Thu Jul 27, 2006 7:29 pm Post subject: Propeller Hub Attachment |
 |
|
Gentlemen:
<![if !supportEmptyParas]><![endif]>
I am attaching the prop to my Rotax 912UL engine. The engine is installed in an Allegro 2000. The prop is a WoodComp Klassic three blade, 63” dia. I also am attaching a prop spinner that is supplied by the Allegro 2000 manufacturer. As I started the assembly I noticed that I seemed to have an extra item, or maybe it is not an extra item. That is the reason for this message. The item in question is a 5⅛” diameter aluminum disc that has a combination of holes at various diameters. There is no large hole in the center of this item, so it cannot go on to the propeller flange that is on the gearbox shaft. The WoodComp instruction manual does not show this item. I have assembled the WoodComp prop hub as follows:
<![if !supportEmptyParas]><![endif]>
<![if !supportLists]>1. <![endif]>Spinner flange is placed against the gearbox flange.
<![if !supportLists]>2. <![endif]>The WoodComp hub is placed against the spinner flange.
<![if !supportLists]>3. <![endif]>The six attaching bolts are then inserted, tourqed appropriately, and safety wired.
<![if !supportLists]>4. <![endif]>The spinner is then attached to the spinner flange.
<![if !supportEmptyParas]><![endif]>
This leaves the disc. What do I do with it? Help!
<![if !supportEmptyParas]><![endif]>
Hugh McKay
<![if !supportEmptyParas]><![endif]>
| | - The Matronics RotaxEngines-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?RotaxEngines-List |
|
|
|
| Back to top |
|
 |
jkuehn(at)mountaintime.my
Guest
|
| Posted: Thu Jul 27, 2006 8:36 pm Post subject: Propeller Hub Attachment |
|
|
I think that is the disk that Rotax sends with the engine, and the only
thing I know about it is: Don't use it! I have no idea why they send it.
Jack
Hugh McKay III wrote:
| Quote: | Gentlemen:
I am attaching the prop to my Rotax 912UL engine. The engine is
installed in an Allegro 2000. The prop is a WoodComp Klassic three
blade, 63” dia. I also am attaching a prop spinner that is supplied by
the Allegro 2000 manufacturer. As I started the assembly I noticed
that I seemed to have an extra item, or maybe it is not an extra item.
That is the reason for this message. The item in question is a 5⅛”
diameter aluminum disc that has a combination of holes at various
diameters. There is no large hole in the center of this item, so it
cannot go on to the propeller flange that is on the gearbox shaft. The
WoodComp instruction manual does not show this item. I have assembled
the WoodComp prop hub as follows:
1. Spinner flange is placed against the gearbox flange.
2. The WoodComp hub is placed against the spinner flange.
3. The six attaching bolts are then inserted, tourqed appropriately,
and safety wired.
4. The spinner is then attached to the spinner flange.
This leaves the disc. What do I do with it? Help!
Hugh McKay
|
| | - The Matronics RotaxEngines-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?RotaxEngines-List |
|
|
|
| Back to top |
|
|
NYTerminat(at)aol.com
Guest
|
| Posted: Thu Jul 27, 2006 8:53 pm Post subject: Propeller Hub Attachment |
|
|
Hugh,
That is how I installed my Klassic on a Zenith 701. The part you described came with the Rotax engine, looks to me like some kind of template.
Bob Spudis
N701ZX CH-701/912ULS
Do not archive
In a message dated 7/27/2006 11:30:18 P.M. Eastern Daylight Time, hgmckay(at)bellsouth.net writes:
| Quote: |
Gentlemen:
I am attaching the prop to my Rotax 912UL engine. The engine is installed in an Allegro 2000. The prop is a WoodComp Klassic three blade, 63” dia. I also am attaching a prop spinner that is supplied by the Allegro 2000 manufacturer. As I started the assembly I noticed that I seemed to have an extra item, or maybe it is not an extra item. That is the reason for this message. The item in question is a 5⅛” diameter aluminum disc that has a combination of holes at various diameters. There is no large hole in the center of this item, so it cannot go on to the propeller flange that is on the gearbox shaft. The WoodComp instruction manual does not show this item. I have assembled the WoodComp prop hub as follows:
1. Spinner flange is placed against the gearbox flange.
2. The WoodComp hub is placed against the spinner flange.
3. The six attaching bolts are then inserted, tourqed appropriately, and safety wired.
4. The spinner is then attached to the spinner flange.
This leaves the disc. What do I do with it? Help!
Hugh McKay
|
| | - The Matronics RotaxEngines-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?RotaxEngines-List |
|
|
|
| Back to top |
|
|
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum
|
Powered by phpBB © 2001, 2005 phpBB Group
|
Get Email Distribution Too!
FAQ
Search
Memberlist
Usergroups
Register
Profile
Log in to check your private messages
Log in
