Matronics Email Lists :: View topic - Electric Elevator Trim connector

Matronics Email Lists
Web Forum Interface to the Matronics Email Lists

Get Email Distribution Too! FAQ Search Memberlist Usergroups Register

Profile Log in to check your private messages Log in

Electric Elevator Trim connector
Goto page Previous 1, 2

Matronics Email Lists Forum Index -> AeroElectric-List

View previous topic :: View next topic

Author Message

dsvs(at)comcast.net
Guest

Posted: Mon Aug 14, 2006 6:40 pm Post subject: Electric Elevator Trim connector

Bob,

The measurement on the RV 7 HS is 3/8 inch.  Don

--

- The Matronics AeroElectric-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?AeroElectric-List

nuckollsr(at)cox.net
Guest

Posted: Tue Aug 15, 2006 4:29 am Post subject: Electric Elevator Trim connector

At 07:39 PM 8/14/2006 -0700, you wrote:



 	  Quote: 	
		  



Bob,

The measurement on the RV 7 HS is 3/8 inch.  Don


	


   Thanks!

- The Matronics AeroElectric-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?AeroElectric-List

chaztuna(at)adelphia.net
Guest

Posted: Wed Aug 16, 2006 5:24 am Post subject: Electric Elevator Trim connector

At 04:21 PM 8/14/2006, you wrote:

  	  Quote: 	
		  --> AeroElectric-List message posted by: "Robert L. Nuckolls, III" <nuckollsr(at)cox.net>



 At 10:34 AM 8/13/2006 -0500, you wrote:



  	  Quote: 	
		  

 The enlargement of the hole was very minor to get the Deans connector through. I did check with Vans and they said it was fine I think their concern is running some type of large connector through that requires a significant hole.



 Darwin N. Barrie 	


  Darwin . . . or anyone else. Exactly what is the size of the

  hole under discussion?



 

        Bob . . . 	


 Bob,

  The hole on my RV-8A (older kit) is 3/8" diameter. Owners of newer RV models (RV-7A & RV-9A) report holes of 5/8" diameter. 



 Charlie Kuss     [quote][b]

- The Matronics AeroElectric-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?AeroElectric-List

chaztuna(at)adelphia.net
Guest

Posted: Wed Aug 16, 2006 5:32 am Post subject: Electric Elevator Trim connector

Brett,

  Your photo shows the rear spar of the horizontal stabilizer, not the elevator spar.  Please check the size of the hole in the elevator spar.

 Charlie Kuss



 [quote]Bob, here is a pic of the hole in the rear horizontal stabilizer spar

 (RV-9).  I have mine stored but you can see the hole is approx. 5/8 to 3/4".



  



 

 Bret Smith

 RV-9A (91314)

 Mineral Bluff, GA

  www.FlightInnovations.com



 --

- The Matronics AeroElectric-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?AeroElectric-List

Display posts from previous:

	Matronics Email Lists Forum Index -> AeroElectric-List	All times are GMT - 8 Hours Goto page Previous 1, 2
Page 2 of 2

Jump to:

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum