Matronics Email Lists :: View topic

Matronics Email Lists
Web Forum Interface to the Matronics Email Lists

Get Email Distribution Too! FAQ Search Memberlist Usergroups Register

Profile Log in to check your private messages Log in

Panel Drawing

Matronics Email Lists Forum Index -> RV10-List

View previous topic :: View next topic

Author Message

jesse(at)itecusa.org
Guest

Posted: Mon Aug 21, 2006 4:02 pm Post subject: Panel Drawing

Does anybody on the list have an accurate drawing of the standard Van's

panel for the -10?  I talked to Van's and they said there should be on on

the Van's Airforce website, but they only had the 8 and 9 or something

like that.  If you have a drawing of the -10 (especially if you know from

experience that it is accurate), please e-mail it off the list.



A waterjet cutting company said it would be cheaper to cut the panel and

all of the cutouts out of a ractangle of aluminum than to just cut out

the...uh...cutouts...from an already cut out panel.  Well, I think I got

that out right.



Thanks and do not archive.



Jesse Saint

I-TEC, Inc.

jesse(at)itecusa.org

www.itecusa.org

- The Matronics RV10-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?RV10-List

Tim(at)MyRV10.com
Guest

Posted: Mon Aug 21, 2006 5:57 pm Post subject: Panel Drawing

I've had one at this link for a couple years now...

Not sure if it's the format you need.

http://www.myrv10.com/miscphotos/rv_drawings/index.html

Tim Olson - RV-10 N104CD - Flying

do not archive

[quote] 

 

 --

- The Matronics RV10-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?RV10-List

evmeg(at)snowcrest.net
Guest

Posted: Tue Aug 22, 2006 6:32 am Post subject: Panel Drawing

I have a couple of AutoCAD layouts you are welcome to. I have build quite a

few panels for assorted airplanes using these shapes so I think you will

find them pretty good....but check them anyway with a full sized drawing

first. I have a piece of 1/4" alum. I am planning on laser cutting for my

panel. It is thicker than stock but heavy enough to machine countersink for

flush instrument screws. I figure that by the time I am done cutting there

wont be much left of the original panel anyway so no big weight penalty.

Evan



---

- The Matronics RV10-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?RV10-List

Display posts from previous:

	Matronics Email Lists Forum Index -> RV10-List	All times are GMT - 8 Hours
Page 1 of 1

Jump to:

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum