Matronics Email Lists :: View topic - Looking for parts for a AC 680 FLP

Matronics Email Lists
Web Forum Interface to the Matronics Email Lists

Get Email Distribution Too! FAQ Search Memberlist Usergroups Register

Profile Log in to check your private messages Log in

Looking for parts for a AC 680 FLP

Matronics Email Lists Forum Index -> Commander-List

View previous topic :: View next topic

Author Message

hcourier(at)cox.net
Guest

Posted: Sat Aug 26, 2006 6:53 pm Post subject: Looking for parts for a AC 680 FLP

Gentlemen:

  

     I'm looking for parts again.  Need two items, one  is needed ASAP.

  

     Aircraft -  1964 Aero Commander 680 FLP w/Mr. RPM  Conversion, SN 1479-6

     

     Parts Needed:

  

     1.  ASAP  -  I need the idler arm, or  bracket or whatever it may be called, that attaches to the right engine on  one end and to 

                          the right engine alternator on the other end.  Midway on this  bracket is the eccentric idler wheel used to adjust 

                          belt tension. The arm has a slight bend to it in near the middle. The  old arm broke at the bolt hole on the engine                           side.  We've looked for a part number in  the manuals and on the part but no luck.  I didn't think of it  today, but                          tomorrow I'll take a  picture of the item in case that may help anyone who thinks they might have  a part.  

                      

                          So many of you guys out there are so  knowledgeable about the Aero Commanders you probably know how                               much it weighs, what time of day it was  made, and the name of the wife and children of the guy who made it.                                (Ha! Ha!)   

  

     2.  Fuel cap - The cap used is about 2 1/2"  diameter, and has a zeus type fastener that engages the anti-siphon value in the  

                          fuel tank.  The small leaf spring on  the cap I have is about useless and I have to check after every refueling to  

                          be sure the cap is locked in place because  the small leaf spring gets out of place and doesn't do it's job. 

  

     If anyone has such items please email me at www.hcourier(at)cox.net.  My cell phone  is 850-217-5185, it's always with me, call

 anytime.  If I'm flying or asleep I turn it off otherwise it rules my  life. 

  

  

 Thank you,

  

 Ray Mansfield

 Ft. Walton Beach, FL 

    [quote][b]

- The Matronics Commander-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Commander-List

hcourier(at)cox.net
Guest

Posted: Sat Aug 26, 2006 7:43 pm Post subject: Looking for parts for a AC 680 FLP

(Note: I thought I sent this once, but I didn't get my copy.  If this  is a repeat please excuse)

 

 

 Gentlemen:

  

     I'm looking for parts again.  Need two items, one  is needed ASAP.

  

     Aircraft -  1964 Aero Commander 680 FLP w/Mr. RPM  Conversion, SN 1479-6

     

     Parts Needed:

  

     1.  ASAP  -  I need the idler arm, or  bracket or whatever it may be called, that attaches to the right engine on  one end and to 

                          the right engine alternator on the other end.  Midway on this  bracket is the eccentric idler wheel used to adjust 

                          belt tension. The arm has a slight bend to it in near the middle. The  old arm broke at the bolt hole on the engine                           side.  We've looked for a part number in  the manuals and on the part but no luck.  I didn't think of it  today, but                          tomorrow I'll take a  picture of the item in case that may help anyone who thinks they might have  a part.  

                      

                          So many of you guys out there are so  knowledgeable about the Aero Commanders you probably know how                               much it weighs, what time of day it was  made, and the name of the wife and children of the guy who made it.                                (Ha! Ha!)   

  

     2.  Fuel cap - The cap used is about 2 1/2"  diameter, and has a zeus type fastener that engages the anti-siphon value in the  

                          fuel tank.  The small leaf spring on  the cap I have is about useless and I have to check after every refueling to  

                          be sure the cap is locked in place because  the small leaf spring gets out of place and doesn't do it's job. 

  

     If anyone has such items please email me at www.hcourier(at)cox.net.  My cell phone  is 850-217-5185, it's always with me, call

 anytime.  If I'm flying or asleep I turn it off otherwise it rules my  life. 

  

  

 Thank you,

  

 Ray Mansfield

 Ft. Walton Beach, FL 

    [quote][b]

- The Matronics Commander-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Commander-List

kamala(at)MSN.COM
Guest

Posted: Sun Aug 27, 2006 4:35 am Post subject: Looking for parts for a AC 680 FLP

<?xml:namespace prefix="v" /><?xml:namespace prefix="o" /><![endif]-->  rm, there is a aircraft welding shop in san antonio, tx that repaired mine.  reasonably priced. from lycoming they are unconcienably expensive. mason

 [quote]   ---

- The Matronics Commander-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Commander-List

bowing74(at)earthlink.net
Guest

Posted: Sun Aug 27, 2006 10:26 am Post subject: Looking for parts for a AC 680 FLP

Heck Ray,  

   

You’re over on the “Redneck Riviera”.  You should take it over to Bubbas Welding shop and Florist and “Geet er done”  $20.00.  

   

bilbo  

         

  

From: owner-commander-list-server(at)matronics.com [mailto:owner-commander-list-server(at)matronics.com] On Behalf Of Ray Mansfield

 Sent: Saturday, August 26, 2006 10:53 PM

 To: commander-list(at)matronics.com

 Subject: Looking for parts for a AC 680 FLP  

  

     

Gentlemen:  

    

   

    

    I'm looking for parts again.  Need two items, one is needed ASAP.  

    

   

    

    Aircraft -  1964 Aero Commander 680 FLP w/Mr. RPM Conversion, [b]SN 1479-6[/b]  

    

      

    

    Parts Needed:  

    

   

    

    1.  ASAP  -  I need the idler arm, or bracket or whatever it may be called, that attaches to the right engine on one end and to   

    

                        the right engine alternator on the other end.  Midway on this bracket is the eccentric idler wheel used to adjust   

    

                        belt tension. The arm has a slight bend to it in near the middle. The old arm broke at the bolt hole on the engine                         side.  We've looked for a part number in the manuals and on the part but no luck.  I didn't think of it today, but                         tomorrow I'll take a picture of the item in case that may help anyone who thinks they might have a part.    

    

                      

    

                        So many of you guys out there are so knowledgeable about the Aero Commanders you probably know how                             much it weighs, what time of day it was made, and the name of the wife and children of the guy who made it.                              (Ha! Ha!)    

    

   

    

    2.  Fuel cap - The cap used is about 2 1/2" diameter, and has a zeus type fastener that engages the anti-siphon value in the   

    

                        fuel tank.  The small leaf spring on the cap I have is about useless and I have to check after every refueling to   

    

                        be sure the cap is locked in place because the small leaf spring gets out of place and doesn't do it's job.   

    

   

    

    If anyone has such items please email me at www.hcourier(at)cox.net.  My cell phone is 850-217-5185, it's always with me, call  

    

anytime.  If I'm flying or asleep I turn it off otherwise it rules my life.   

    

   

    

   

    

Thank you,  

    

   

    

Ray Mansfield  

    

Ft. Walton Beach,  FL   

   	  Quote: 	
		     	
0 	  Quote: 	
		   	
1 	  Quote: 	
		   	
2 	  Quote: 	
		   	
3 	  Quote: 	
		   	
4 	  Quote: 	
		   	
5 	  Quote: 	
		   	
6 	  Quote: 	
		   	
7 	  Quote: 	
		   	
8 	  Quote: 	
		   	
9 	  Quote: 	
		  	
0 	  Quote: 	
		  	
1 	  Quote: 	
		  	
2 	  Quote: 	
		  	
3

       [quote][b]

- The Matronics Commander-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Commander-List

moe(at)rosspistons.com
Guest

Posted: Mon Aug 28, 2006 5:49 am Post subject: Looking for parts for a AC 680 FLP

Ray,  

   

Jack Chappell has the fuel caps.  1.951.371.7513.  

   

Regards,  

   

Moe Mills  

N680RR  680F(p)  

         

  

From: owner-commander-list-server(at)matronics.com [mailto:owner-commander-list-server(at)matronics.com] On Behalf Of MASON CHEVAILLIER

 Sent: Sunday, August 27, 2006 5:34 AM

 To: commander-list(at)matronics.com

 Subject: Re: Commander-List: Looking for parts for a AC 680 FLP  

  

       

rm, there is a aircraft welding shop in san antonio, tx that repaired mine. reasonably priced. from lycoming they are unconcienably expensive. mason  

  [quote]    

---

- The Matronics Commander-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Commander-List

wjrhamilton(at)optusnet.c
Guest

Posted: Mon Aug 28, 2006 6:09 pm Post subject: Looking for parts for a AC 680 FLP

Ray,

 Contact General Aviation Maintenance, GAM, Steve Nott, in Melbourne, Australia. Phone +61 3 9379 1019, fax +61 3 9374 2620.

 Also, there is a  firm here , J&R Aerospace, who make a range of hard to get bits for Aero Commanders, they can reproduce to a pattern, that would probably need a DER/337 sign-off, depending on the views of your A&P/IA.

 Cheers,

 Bill Hamilton



 



 

 At 12:52 PM 27/08/2006, you wrote:

 [quote]Gentlemen:

  

     I'm looking for parts again.  Need two items, one is needed ASAP.

  

     Aircraft -  1964 Aero Commander 680 FLP w/Mr. RPM Conversion, SN 1479-6

     

     Parts Needed:

  

     1.  ASAP  -  I need the idler arm, or bracket or whatever it may be called, that attaches to the right engine on one end and to 

                         the right engine alternator on the other end.  Midway on this bracket is the eccentric idler wheel used to adjust 

                         belt tension. The arm has a slight bend to it in near the middle. The old arm broke at the bolt hole on the engine                         side.  We've looked for a part number in the manuals and on the part but no luck.  I didn't think of it today, but                         tomorrow I'll take a picture of the item in case that may help anyone who thinks they might have a part.  

                     

                         So many of you guys out there are so knowledgeable about the Aero Commanders you probably know how                             much it weighs, what time of day it was made, and the name of the wife and children of the guy who made it.                              (Ha! Ha!)  

  

     2.  Fuel cap - The cap used is about 2 1/2" diameter, and has a zeus type fastener that engages the anti-siphon value in the 

                         fuel tank.  The small leaf spring on the cap I have is about useless and I have to check after every refueling to 

                         be sure the cap is locked in place because the small leaf spring gets out of place and doesn't do it's job. 

  

     If anyone has such items please email me at www.hcourier(at)cox.net.  My cell phone is 850-217-5185, it's always with me, call

 anytime.  If I'm flying or asleep I turn it off otherwise it rules my life. 

  

  

 Thank you,

  

 Ray Mansfield

 Ft. Walton Beach, FL 



 [b]

- The Matronics Commander-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Commander-List

Display posts from previous:

	Matronics Email Lists Forum Index -> Commander-List	All times are GMT - 8 Hours
Page 1 of 1

Jump to:

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum