Matronics Email Lists :: View topic

Matronics Email Lists
Web Forum Interface to the Matronics Email Lists

Get Email Distribution Too! FAQ Search Memberlist Usergroups Register

Profile Log in to check your private messages Log in

Stripper

Matronics Email Lists Forum Index -> Zenith-List

View previous topic :: View next topic

Author Message

naumuk(at)alltel.net
Guest

Posted: Thu Sep 07, 2006 3:41 pm Post subject: Stripper

All-

     Screwed up with my files  somewhere. Mea culpa!

     What was the name of the  stripper available from NAPA?

     

 Bill Naumuk

HDS Fuselage  (Progress in  quicksand)

Townville, Pa

    [quote][b]

pmoore505(at)msn.com
Guest

Posted: Thu Sep 07, 2006 4:23 pm Post subject: Stripper

I think her name is Doris but everyone calls  her Candy.......

 [quote]   ---

jhstarn(at)verizon.net
Guest

Posted: Thu Sep 07, 2006 4:29 pm Post subject: Stripper

Here in Apple Valley she goes by the name of Zelda Za Zipper Picker  Upper. 

 Little humor guys.   KABONG  Do Not Archive

 [quote]   ---

grs-pms(at)comcast.net
Guest

Posted: Thu Sep 07, 2006 4:36 pm Post subject: Stripper

Her name was "Bubbles", wasn't it?  I didn't  realize she was from Napa.

  

 George     

  

  Do not archive

 [quote]   ---

naumuk(at)alltel.net
Guest

Posted: Thu Sep 07, 2006 4:55 pm Post subject: Stripper

Forget it. I'm about ready to unsubscribe. Thanks  alot.

 Bill Naumuk

HDS Fuselage

Townville, Pa

 [quote]   ---

randy(at)n344rb.com
Guest

Posted: Thu Sep 07, 2006 5:02 pm Post subject: Stripper

Yeah... Candy... because she's kinda sticky and  leaves a sweet taste in your mouth!  

  

 Randy

 Do Not Archive

  

 [quote]   ---

Chris In Marshfield

Joined: 26 May 2006
Posts: 87

Posted: Thu Sep 07, 2006 5:24 pm Post subject: Re: Stripper

Hi Bill,



From a reply to your "White Corrosion" post from yesterday:



<snip>

NAPA carries a Martin-Senour product called "Twin Etch".

</snip>



Best regards,

Chris

_________________
Chris Owens
Waunakee, WI

ljkyle(at)insightbb.com
Guest

Posted: Thu Sep 07, 2006 5:46 pm Post subject: Stripper

Well, here's my 2 cents worth. I started out using zinc chromate, but  

switched to the NAPA self-etching primer. Number one reason...better  

adhesion (with same prep). I prep with Scotch-Brite followed by cleaning  

with acetone. The zinc chromate is easy to scratch off. The self etching  

primer is virtually bullet proof. It really sticks. The NAPA primer is cheap  

and readily available. I'm sure there are better (i.e. more expensive)  

alternatives, but any primer should be better than no primer.



 [quote]   ---

randy(at)n344rb.com
Guest

Posted: Thu Sep 07, 2006 7:14 pm Post subject: Stripper

I've used the same stuff since I began my  project..  Works great...

  

 I wash my parts with Dawn dishwashing liquid,  using scotch brite, then after it's all scuffed, I use a cloth to finish the  washing, dry it off, and wipe it down with MEK, then spray the 7220 primer on  it...

  

 As of late, I've quit using the scotch brite, as  that's what the "self etching" in the primer does...  Just make sure the  parts are clean; free of oil and spray away...

  

  

 Randy

 XL - Wings - Plans Only

 Do Not Archive

  

 [quote]   ---

NYTerminat(at)AOL.COM
Guest

Posted: Thu Sep 07, 2006 10:24 pm Post subject: Stripper

NAPA has  strippers?

 do not archive

  

  

  

  

 In a message dated 9/7/2006 7:42:30 P.M. Eastern Daylight Time,  naumuk(at)alltel.net writes:

  	  Quote: 	
		     All-

       Screwed up with my files    somewhere. Mea culpa!

       What was the name of the    stripper available from NAPA?

       

   Bill Naumuk

HDS Fuselage  (Progress in    quicksand)

Townville, Pa

 	  Quote: 	
		  

	
	


 

  

  [quote][b]

dredmoody(at)cox.net
Guest

Posted: Fri Sep 08, 2006 4:11 am Post subject: Stripper

Yep, and the word is that they're TWINS!!! Cool, huh?

  

 Ed

  

 Do Not Archive

 [quote]   ---

naumuk(at)alltel.net
Guest

Posted: Fri Sep 08, 2006 3:06 pm Post subject: Stripper

Chris-

    Twin etch. Thanks. I live 56 miles from a NAPA store, but only 3 when 

you figure I commute 53 to work, and that's in the city where the store is 

located.

     If I'd received a straight answer from the list yesterday, I could have 

picked up what I needed on my lunch break. Now I have to either drive 100+ 

miles or wait until Monday and modify my building schedule.

     I'm as big an offender as anyone else, but remember people, the site is 

supposed to be used for helping fellow builders.

                                        Archive

Bill Naumuk

HDS Fuselage

Townville, Pa

---

jhstarn(at)verizon.net
Guest

Posted: Fri Sep 08, 2006 4:16 pm Post subject: Stripper

Sorry Bill, IF I had known the answer about the part/stripper I would have 

included it in my post.

BUT in trying times, humor can relive stress.

BUT when one lays out a straight line like that one, There are those of us 

that will pounce on it.

Remember: When you are 90% complete, there's still 90% to go..

KABONG  Do Not Archive this either.



---

naumuk(at)alltel.net
Guest

Posted: Fri Sep 08, 2006 5:43 pm Post subject: Stripper

John-

    I know, I left myself open. Maybe we ought to have a code for when we're 

serious and when we're not.

Bill Naumuk

HDS Fuselage

Townville, Pa

---

pmoore505(at)msn.com
Guest

Posted: Sat Sep 09, 2006 3:03 pm Post subject: Stripper

You know, it's sad when useless backbiting, flaming, and worthless BS get

defended but a tiny bit of humor that you obviously set yourself up for gets

slammed as a detraction from the value of the site. I've lost any interest

in being on this list any longer. Hope everyone finishes and flys safe.



Paul Moore

Silver City, New Mexico, USA

XL-O200

Later dudes................

Definitely ARCHIVE



---

naumuk(at)alltel.net
Guest

Posted: Sat Sep 09, 2006 4:44 pm Post subject: Stripper

Paul-

    Unfortunately, it's getting hard to tell a genuine request from help 

from worthless BS on the list. I was disgusted enough to quit because of 

this incident, but on the other hand, the positive aspects of membership 

outweigh the bad.

    You hope everyone finishes and flys safe? What's the list for- humor or 

information? I made so many mistakes on my project in the first 4 months of 

toughing it out on my own that now I won't drill a hole until I'm good and 

sure it's in the right place. I've learned that conducting a thorough 

research before acting is a lot less time consuming than cleaning up after a 

mistake. As a result, I haven't had to rebuild or replace a part in over a 

year..

    I came close to quitting, but will stick with the list. My fault for 

phrasing a request for help that some people interpreted as grounds for a 

joke. I didn't realize you had to signal your intentions.

Bill Naumuk

HDS Fuselage

Townville, Pa

---

NYTerminat(at)aol.com
Guest

Posted: Sat Sep 09, 2006 7:46 pm Post subject: Stripper

Lighten up!!!!!!!!!!!

  

  

  

  

 In a message dated 9/9/2006 8:45:28 P.M. Eastern Daylight Time,  naumuk(at)alltel.net writes:

 [quote]-->    Zenith-List message posted by: "Bill Naumuk"    <naumuk(at)alltel.net>



Paul-

    Unfortunately, it's    getting hard to tell a genuine request from help 

from worthless BS on the    list. I was disgusted enough to quit because of 

this incident, but on the    other hand, the positive aspects of membership 

outweigh the bad.

       You hope everyone finishes and flys safe? What's the list for- humor or    

information? I made so many mistakes on my project in the first 4 months    of 

toughing it out on my own that now I won't drill a hole until I'm good    and 

sure it's in the right place. I've learned that conducting a thorough    

research before acting is a lot less time consuming than cleaning up after    a 

mistake. As a result, I haven't had to rebuild or replace a part in over    a 

year..

    I came close to quitting, but will stick with    the list. My fault for 

phrasing a request for help that some people    interpreted as grounds for a 

joke. I didn't realize you had to signal your    intentions.

Bill Naumuk

HDS Fuselage

Townville, Pa

----- Original    Message ----- 

From: "Paul Moore" <pmoore505(at)msn.com>

To:    <zenith-list(at)matronics.com>

Sent: Saturday, September 09, 2006 7:03    PM

Subject: Re: Re: Stripper

[quote] -->    Zenith-List message posted by: "Paul Moore"    <pmoore505(at)msn.com>



 You know, it's sad when useless    backbiting, flaming, and worthless BS get

 defended but a tiny bit of    humor that you obviously set yourself up for 

 gets

 slammed as    a detraction from the value of the site. I've lost any interest

 in    being on this list any longer. Hope everyone finishes and flys    safe.



 Paul Moore

 Silver City, New Mexico, USA

    XL-O200

 Later dudes................

 Definitely    ARCHIVE



 ---

Display posts from previous:

	Matronics Email Lists Forum Index -> Zenith-List	All times are GMT - 8 Hours
Page 1 of 1

Jump to:

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum