raimo.toivio(at)rwm.fi
Guest
|
 Posted: Wed Sep 27, 2006 11:24 am Post subject: post curing |
 |
|
Somebody might be interested...
All my Europa´s parts are sanded and filled
and finally ready for painting and it was time
to compelete post curing process today and
so I decided to bake everything 10 hrs (at) 50C.
I heated my whole garage (200 cubic metres)
with 9kW electric heater and 24 kW gas heater
(outside temp was around 15C).
Relative humidity inside was fixed 34% all the time.
The temperature of the down surfaces was
varying between 44-48C and top surfaces were
48-52C. All the flying surfaces + wings were
well supported. Fuselage was just on it´s wheels
+ side supporters.
I did not notice any changes in structures.
Because I was not brave enough, I were there
whole day long, mask on my face. I could not
leave them alone. Now I feel also cooked.
It was hard game to play...never never do it again!
Regards, Raimo
=============
Raimo M W Toivio
OH-XRT Europa XS Mono #417
OH-CVK C172 Skyhawk
OH-BLL Beechcraft C45 w radial engines (grounded)
37500 Lempaala
Finland
tel + 358 3 3753 777
fax + 358 3 3753 100
gsm + 358 40 590 1450
raimo.toivio(at)rwm.fi (raimo.toivio(at)rwm.fi)
www.rwm.fi
[quote][b]
| | - The Matronics Europa-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?Europa-List |
|
|
|
Get Email Distribution Too!
FAQ
Search
Memberlist
Usergroups
Register
Profile
Log in to check your private messages
Log in
