Matronics Email Lists :: View topic - I need the pinout for Garmin GTX 327

Matronics Email Lists
Web Forum Interface to the Matronics Email Lists

Get Email Distribution Too! FAQ Search Memberlist Usergroups Register

Profile Log in to check your private messages Log in

I need the pinout for Garmin GTX 327

Matronics Email Lists Forum Index -> RV-List

View previous topic :: View next topic

Author Message

hal_kempthorne(at)sbcglob
Guest

Posted: Fri Oct 20, 2006 12:41 pm Post subject: I need the pinout for Garmin GTX 327

Hi,

  

 Actually, I just need power and ground pin numbers.

  

 hal



 [quote][b]

- The Matronics RV-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?RV-List

rhdudley1(at)bellsouth.ne
Guest

Posted: Fri Oct 20, 2006 1:00 pm Post subject: I need the pinout for Garmin GTX 327

Hi Hal,

 I could send your the whole pin-out, if you need it. 

 The power and ground for DB-25 are: 

 Power Input (+11 to +33):  15

 Power Ground: 13

 Power Ground: 25

 14VDC/5 VC Panel Lighting Input: 24

 

 Regards,

 

 Richard Dudley

 -6A flying

 

 

 Hal Kempthorne wrote:

 [quote]         

 Hi,

    

   Actually, I just need power and ground pin numbers.

    

   hal

   

    	  Quote: 	
		  

	
 [b]

- The Matronics RV-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?RV-List

Doug Gray

Joined: 10 Jan 2006
Posts: 112
Location: Sydney, Australia

Posted: Fri Oct 20, 2006 1:32 pm Post subject: I need the pinout for Garmin GTX 327

Hal,



Pin 15 Power In 14/28V

Pin 13 Power Ground

Pin 25 Signal Ground

Pin 23 28V Panel Lighting In

Pin 24 14V/5V Panel Lighting In 

Pin 1  Avionics Master On (Input) (Tie to Pin 15 for auto power up)



I strongly recommend you drop an email to Garmin tech support and ask

for a copy of the install manual.  I can send a copy but my edition (Rev

L June 2006) has so many errors, it's no wonder they require it be

supplied with a pre-built harness.



There is no such thing as a simple question!

Doug Gray



On Fri, 2006-10-20 at 13:37 -0700, Hal Kempthorne wrote:

 	  Quote: 	
		   

 Hi,

  

 Actually, I just need power and ground pin numbers.

  

 hal

- The Matronics RV-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?RV-List

khorton01(at)rogers.com
Guest

Posted: Fri Oct 20, 2006 1:45 pm Post subject: I need the pinout for Garmin GTX 327

On 20 Oct 2006, at 16:37, Hal Kempthorne wrote:



 	  Quote: 	
		  

 Hi,



 Actually, I just need power and ground pin numbers.




	


 From the install manual, rev J, dated May 2003:



Power - pin 15

Ground - pins 13 & 25

Panel lighting input - pin 24 (assuming a 14v system)



Kevin Horton         RV-8 (finishing kit)

Ottawa, Canada

http://www.kilohotel.com/rv8

- The Matronics RV-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?RV-List

Display posts from previous:

	Matronics Email Lists Forum Index -> RV-List	All times are GMT - 8 Hours
Page 1 of 1

Jump to:

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum