Matronics Email Lists :: View topic - Glueing foam ribs in HS and Elevator

Matronics Email Lists
Web Forum Interface to the Matronics Email Lists

Get Email Distribution Too! FAQ Search Memberlist Usergroups Register

Profile Log in to check your private messages Log in

Glueing foam ribs in HS and Elevator - Pro-seal or ?

Matronics Email Lists Forum Index -> RV10-List

View previous topic :: View next topic

Author Message

MauleDriver(at)nc.rr.com
Guest

Posted: Wed Nov 08, 2006 3:26 pm Post subject: Glueing foam ribs in HS and Elevator - Pro-seal or ?

Vans specs Pro-seal.  I see a number of people have used RTV silicon 

adhesive.  Thoughts?



- Though I've never handled it, Pro-seal seems messy - but made to 

withstand flexing, heat, and other a/c conditions

- Various silicon adhesives are available at the local airplane stores 

(Lowes) - suitability not know by this builder



I'm looking for some opinion.  Thanks



Bill Watson - Elevator, QB in transit, still acquiring tools and technique

http://www.mykitlog.com/MauleDriver/

do not archive

- The Matronics RV10-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?RV10-List

mike(at)learningplanet.co
Guest

Posted: Wed Nov 08, 2006 4:42 pm Post subject: Glueing foam ribs in HS and Elevator - Pro-seal or ?

Hi Bill,



I have used ProSeal and have been happy with the results. Yes, it  

smells weird and is messy, but it's not too bad. You know it will  

work and won't crack. One less thing to worry about.



Regards,

Mike Schipper

RV-9A - N63MS - Flying

RV-10 #40576 - Wings on the way

http://www.rvten.com

On Nov 8, 2006, at 5:25 PM, MauleDriver wrote:



 	  Quote: 	
		   



 Vans specs Pro-seal.  I see a number of people have used RTV  

 silicon adhesive.  Thoughts?



 - Though I've never handled it, Pro-seal seems messy - but made to  

 withstand flexing, heat, and other a/c conditions

 - Various silicon adhesives are available at the local airplane  

 stores (Lowes) - suitability not know by this builder



 I'm looking for some opinion.  Thanks



 Bill Watson - Elevator, QB in transit, still acquiring tools and  

 technique

 http://www.mykitlog.com/MauleDriver/

 do not archive

- The Matronics RV10-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?RV10-List

patrick.pulis(at)seagas.c
Guest

Posted: Thu Nov 09, 2006 2:35 am Post subject: Glueing foam ribs in HS and Elevator - Pro-seal or ?

G'day mate from downunder, wear two pairs of gloves and use old rags to

wipe everything up with Toluene and you'll be OK.



The end result is worth it.



Pat

RV-10 40822

Adelaide, South Australia 



--

- The Matronics RV10-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?RV10-List

Display posts from previous:

	Matronics Email Lists Forum Index -> RV10-List	All times are GMT - 8 Hours
Page 1 of 1

Jump to:

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum