Matronics Email Lists :: View topic - Woodward Prop govenor..

Matronics Email Lists
Web Forum Interface to the Matronics Email Lists

Get Email Distribution Too! FAQ Search Memberlist Usergroups Register

Profile Log in to check your private messages Log in

Woodward Prop govenor..

Matronics Email Lists Forum Index -> RV-List

View previous topic :: View next topic

Author Message

rv6(at)earthlink.net
Guest

Posted: Sun Nov 19, 2006 7:33 am Post subject: Woodward Prop govenor..

---

- The Matronics RV-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?RV-List

rv6(at)earthlink.net
Guest

Posted: Sun Nov 19, 2006 7:35 am Post subject: Woodward Prop govenor..

---

- The Matronics RV-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?RV-List

Dale Ensing

Joined: 11 Jan 2006
Posts: 571
Location: Aero Plantation Weddington NC

Posted: Sun Nov 19, 2006 11:38 am Post subject: Woodward Prop govenor..

John,

 Is it leaking at the spacer plate? Do you have the  spacer plate in place?

 Dale Ensing

 do not achieve

 [quote]    

   Woodward    oil leak Help..

   Has any    one that has Vans Woodward governor,had oil leaks

   around the    1/4 mounting studs to the unit..Even after replacing

   with new    gasket,there is oil coming out at the studs at 2000 rpm

   or more!!I    know that there is a lot of pressure this unit puts out,

   but I    really do not want to send it out to be checked if anyone    has

   had this    same problem..It has only about 130 hrs on it..

                          Anyone have any ideas???

                                         Thanks

                                John McMahon (RV6 C/S 180)

 	  Quote: 	
		  



href="http://www.aeroelectric.com">www.aeroelectric.com

href="http://www.buildersbooks.com">www.buildersbooks.com

href="http://www.kitlog.com">www.kitlog.com

href="http://www.homebuilthelp.com">www.homebuilthelp.com

href="http://www.matronics.com/contribution">http://www.matronics.com/chref="http://www.matronics.com/Navigator?RV-List">http://www.matronics.com/Navigator?RV-List



	
[b]

- The Matronics RV-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?RV-List

_________________
Dale Ensing
RV-6A
Aero Plantation
Weddington NC

rv6(at)earthlink.net
Guest

Posted: Sun Nov 19, 2006 2:14 pm Post subject: Woodward Prop govenor..

Dale

 Well it is  leaking at the 10 o'clock stud and moving back and pooling

 in a small  depression just past the nut..The spacer plate did leak a

 little,but  removed and installed with new gasket..I have been chasing

 this leak  since I installed the new eng and governor,and got mad and said this is going to  stop!!It will only show up at the 2000 and operate the CS some and out it  comes...I sure hate to have to send it off for $320.00 to check it out..I am  going to try to call Woodward tomorrow..

                                                 Thanks

                                                        John

 [quote]   ---

- The Matronics RV-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?RV-List

Kellym

Joined: 10 Jan 2006
Posts: 1705
Location: Sun Lakes AZ

Posted: Sun Nov 19, 2006 3:04 pm Post subject: Woodward Prop govenor..

IIRC there is supposed to be a gasket on BOTH sides of the spacer.



John Mcmahon wrote:

[quote] *Dale*

 *Well it is leaking at the 10 o'clock stud and moving back and pooling*

 *in a small depression just past the nut..The spacer plate did leak a*

 *little,but removed and installed with new gasket..I have been chasing*

 *this leak since I installed the new eng and governor,and got mad and 

 said this is going to stop!!It will only show up at the 2000 and 

 operate the CS some and out it comes...I sure hate to have to send it 

 off for $320.00 to check it out..I am going to try to call Woodward 

 tomorrow..*

 *                                               Thanks*

 *                                                      John*



     ---

- The Matronics RV-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?RV-List

_________________
Kelly McMullen
A&P/IA, EAA Tech Counselor # 5286
KCHD

Larry Bowen

Joined: 09 Jan 2006
Posts: 802
Location: NC, USA

Posted: Sun Nov 19, 2006 6:29 pm Post subject: Woodward Prop govenor..

I have a rebuilt Woodward gov that works fine.  Leaked  at one time, but a new gasket fixed it.  

  

 You've witnessed it squirt out at that location?  It  can't be coming from something up higher on the accessory case and leaking  down?  Just a thought....sometimes it's hard to  tell......

 

-

Larry Bowen

Larry(at)BowenAero.com

http://BowenAero.com

  



 [quote]         From: Dale Ensing    [mailto:densing(at)carolina.rr.com] 

Sent: Sunday, November 19, 2006    2:37 PM

To: rv-list(at)matronics.com

Subject: Fw:    Woodward Prop govenor..

   

   John,

   Is it leaking at the spacer plate? Do you have    the spacer plate in place?

   Dale Ensing

   do not achieve

    	  Quote: 	
		        

     Woodward      oil leak Help..

     Has any      one that has Vans Woodward governor,had oil leaks

     around      the 1/4 mounting studs to the unit..Even after      replacing

     with new      gasket,there is oil coming out at the studs at 2000  rpm

     or      more!!I know that there is a lot of pressure this unit puts      out,

     but I      really do not want to send it out to be checked if anyone      has

     had this      same problem..It has only about 130 hrs on it..

                              Anyone have any ideas???

                                             Thanks

                                    John McMahon (RV6 C/S 180)

 	  Quote: 	
		  



href="http://www.aeroelectric.com">www.aeroelectric.com

href="http://www.buildersbooks.com">www.buildersbooks.com

href="http://www.kitlog.com">www.kitlog.com

href="http://www.homebuilthelp.com">www.homebuilthelp.com

href="http://www.matronics.com/contribution">http://www.matronics.com/chref="http://www.matronics.com/Navigator?RV-List">http://www.matronics.com/Navigator?RV-List



	




href="http://www.aeroelectric.com">www.aeroelectric.com

href="http://www.buildersbooks.com">www.buildersbooks.com

href="http://www.kitlog.com">www.kitlog.com

href="http://www.homebuilthelp.com">www.homebuilthelp.com

href="http://www.matronics.com/contribution">http://www.matronics.com/chref="http://www.matronics.com/Navigator?RV-List">http://www.matronics.com/Navigator?RV-List



	
[b]

- The Matronics RV-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?RV-List

_________________
Larry Bowen
RV-8 SOLD,
RV-7QB in progress...

Display posts from previous:

	Matronics Email Lists Forum Index -> RV-List	All times are GMT - 8 Hours
Page 1 of 1

Jump to:

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum