Matronics Email Lists :: View topic

Matronics Email Lists
Web Forum Interface to the Matronics Email Lists

Get Email Distribution Too! FAQ Search Memberlist Usergroups Register

Profile Log in to check your private messages Log in

Z-19 questions

Matronics Email Lists Forum Index -> AeroElectric-List

View previous topic :: View next topic

Author Message

bbradburry(at)allvantage.
Guest

Posted: Wed Nov 22, 2006 11:00 am Post subject: Z-19 questions

Bob, et al,

I am installing a fuel injected Mazda rotary engine and trying to follow 

the Z-19 guidelines for dual battery, single alternator.  Looking at the 

engine primary and secondary circuit, I need to install a primary and 

secondary fuel pump, plus I want to power the coils and the injectors 

off of the battery buss.

How should I do this?  I suppose I could take the fuel pump diode output 

and switch it to either of the two fuel pumps???

What about the coils and injectors?  Should I set up similar circuits 

for them, or is there a better way to reduce parts???

I would appreciate any guidance you guys could give me.

Thanks and Happy Thanksgiving!

Bill B

bbradburry(at)allvantage.
Guest

Posted: Thu Nov 23, 2006 8:53 am Post subject: Z-19 questions

I really would like some advice on the below question.  I assume that it 

seems pretty simple to some but it is beyond me....

Thanks, and Happy Thanksgiving.



Bill B



*Subject:* 	     	*/Z-19 questions/*

*From:* 	     	*/Bill Bradburry/ (/bbradburry(at)allvantage.com/ 

<mailto:bbradburry(at)allvantage.com?subject=Re:%20Z-19%20questions&replyto=45649E28.9030501(at)allvantage.com>)* 



*Date:* 	     	*/*Wed Nov 22 - 11:00 AM*/*



    *Bob, and others,

    I am installing a fuel injected Mazda rotary engine and trying to follow 

    the Z-19 guidelines for dual battery, single alternator.  Looking at the 

    engine primary and secondary circuit, I need to install a primary and 

    secondary fuel pump, plus I want to power the coils and the injectors 

    off of the battery buss.

    How should I do this?  I suppose I could take the fuel pump diode output 

    and switch it to either of the two fuel pumps???

    What about the coils and injectors?  Should I set up similar circuits 

    for them, or is there a better way to reduce parts???

    I would appreciate any guidance you guys could give me.

    Thanks and Happy Thanksgiving!

    Bill B

    *

simon(at)synchronousdesig
Guest

Posted: Thu Nov 23, 2006 5:43 pm Post subject: Z-19 questions

Mofo,



I can download it.  I'm doing it right now!  I thought this book cost money,

and here it is in PDF on the fucking internet.



I'll see you at the airport Saturday morning.



Thanks a bunch.



Simon Ramirez, Consultant

Synchronous Design, Inc.

Oviedo, FL  32765  USA

407-365-8928: home/office

407-221-8928: mobile

Xilinx Alliance Partner

 

Copyright C 2006

 



--

riggs_la(at)yahoo.com
Guest

Posted: Thu Nov 23, 2006 6:12 pm Post subject: Z-19 questions

That one is and old version.



"S. Ramirez" <simon(at)synchronousdesign.com> wrote:[quote] --> AeroElectric-List message posted by: "S. Ramirez" 



Mofo,



I can download it.  I'm doing it right now!  I thought this book cost money,

and here it is in PDF on the fucking internet.



I'll see you at the airport Saturday morning.



Thanks a bunch.



Simon Ramirez, Consultant

Synchronous Design, Inc.

Oviedo, FL  32765  USA

407-365-8928: home/office

407-221-8928: mobile

Xilinx Alliance Partner

 

Copyright C 2006

 



--

Dale Ensing

Joined: 11 Jan 2006
Posts: 571
Location: Aero Plantation Weddington NC

Posted: Thu Nov 23, 2006 6:31 pm Post subject: Z-19 questions

Simon Ramirez,

Please refrain from the offensive language. It is not appropriate for this 

list exchange.

Dale Ensing



---

_________________
Dale Ensing
RV-6A
Aero Plantation
Weddington NC

simon(at)synchronousdesig
Guest

Posted: Thu Nov 23, 2006 7:06 pm Post subject: Z-19 questions

I apologize to everyone on this list for the previous offensive email that I

accidentally posted.  I thought I was responding to another email from a

personal friend, unrelated to the email that you saw below mine.  I goofed

big time.  Please accept my apologies, and it will not happen again.  I

contacted Bob N. about what to do, but decided to post an apology

nonetheless.



I also apologize personally to Bill Bradburry, who had nothing to do with

the email.



Simon Ramirez

nuckollsr(at)cox.net
Guest

Posted: Thu Nov 23, 2006 7:37 pm Post subject: Z-19 questions

Simon,



    You have done all that is necessary and expected. Our

    society is replete with individuals who, when indulging

    in a dishonorable activity, will hat-dance around the

    the event rather than accept responsibility and offer

    restitution.



    Your willingness to step up to the bar and set things

    right is as much as any of us can ask. We're all sorry

    it happened but in light of your subsequent behavior,

    I'll suggest it's an event unworthy of further attention.



    I'm perfectly willing to move on from here without

    prejudice. I'll ask others on the list to join me.



    Bob . . .

At 10:04 PM 11/23/2006 -0500, you wrote:



 	  Quote: 	
		  

<simon(at)synchronousdesign.com>



I apologize to everyone on this list for the previous offensive email that I

accidentally posted.  I thought I was responding to another email from a

personal friend, unrelated to the email that you saw below mine.  I goofed

big time.  Please accept my apologies, and it will not happen again.  I

contacted Bob N. about what to do, but decided to post an apology

nonetheless.



I also apologize personally to Bill Bradburry, who had nothing to do with

the email.



Simon Ramirez

rdunhamtn(at)hotmail.com
Guest

Posted: Fri Nov 24, 2006 3:37 am Post subject: Z-19 questions

Simon,



Now THAT'S how a gentleman apologizes! Our politicians could take a lesson 

from you )



Rodney in Tennessee



DO NOT ARCHIVE



_________________________________________________________________

Get the latest Windows Live Messenger 8.1 Beta version. Join now. 

http://ideas.live.com

JOHN TIPTON

Joined: 17 Sep 2006
Posts: 239
Location: Torquay - England

Posted: Fri Nov 24, 2006 4:52 am Post subject: Z-19 questions

Is this what our friendly discussion group has come  to

  

 John

 [quote]"S.    Ramirez"  wrote:    	  Quote: 	
		  Mofo,



I      can download it. I'm doing it right now! I thought this book cost      money,

and here it is in PDF on the fucking internet.



I'll see you      at the airport Saturday morning.



Thanks a bunch.



Simon      Ramirez, Consultant

Synchronous Design, Inc.

Oviedo, FL 32765      USA

407-365-8928: home/office

407-221-8928: mobile

Xilinx Alliance      Partner



Copyright C 2006

-----Original      Message-----

From:      owner-aeroelectric-list-server(at)matronics.com

[mailto:owner-aeroelectric-list-server(at)matronics.com]      On Behalf Of Bill

Bradburry

Sent: Thursday, November 23, 2006 11:53      AM

To: aeroelectric-list(at)matronics.com

Subject: AeroElectric-List:      Z-19 questions



--> AeroElectric-List message posted by: Bill      Bradburry 

--> 



I really would like      some advice on the below question. I assume that it

seems pretty simple      to some but it is beyond me....

Thanks, and Happy      Thanksgiving.



Bill B



*Subject:* */Z-19 questions/*

*From:*      */Bill Bradburry/ (/bbradburry(at)allvantage.com/      



49E28.9030501(at)allvantage.com>)*      



*Date:* */*Wed Nov 22 - 11:00 AM*/*



*Bob, and others,

I am      installing a fuel injected Mazda rotary engine and trying to      follow



the Z-19 guidelines for dual battery, single alternator.      Looking at the



engine primary and secondary circuit, I need to      install a primary and 

secondary fuel pump, plus I want to power the      coils and  	  Quote: 	
		  



href="http://www.aeroelectric.com">www.aeroelectric.com

href="http://www.buildersbooks.com">www.buildersbooks.com

href="http://www.kitlog.com">www.kitlog.com

href="http://www.homebuilthelp.com">www.homebuilthelp.com

href="http://www.matronics.com/contribution">http://www.matronics.com/chref="http://www.matronics.com/Navigator?AeroElectric-List">http://www.matronics.com/Navigator?AeroElectric-List



	
	
[b]

nuckollsr(at)cox.net
Guest

Posted: Fri Nov 24, 2006 6:28 pm Post subject: Z-19 questions

At 12:50 PM 11/24/2006 +0000, you wrote:



 	  Quote: 	
		  Is this what our friendly discussion group has come to



John


	


   You're a day late and a dollar short my friend. This VERY

   friendly discussion group has not "come to anything"

   as a result of the note you've cited. Furthermore,

   the whole matter was put to rest hours ago.



   Bob . . .

nuckollsr(at)cox.net
Guest

Posted: Fri Nov 24, 2006 6:30 pm Post subject: Z-19 questions

At 07:05 AM 11/24/2006 -0500, you wrote:



 	  Quote: 	
		  

Bob,



Thank you for publishing your most welcomed letter of forgiveness.  It means

a lot to me, especially coming from a man whom I admire in many ways.  You

don't know me well, because I am a recent newcomer (within a year) and

mostly lurker.  I am not in the wire system planning phase of my homebuilt

project yet, so I choose to stay mostly quiet until I stick my foot in my

mouth. 


	


     You are not alone sir. Matt tells me there are over 1300

     folks subscribed to this list and obviously, the vast majority

     must find value in watching the conversations go by else they

     would simply unsubscribe.



     Be silent or participate as the need suits you but please

     don't hesitate to jump in for clarification or expansion

     of an idea that seems to have relevance to your plans

     or understanding.

 	  Quote: 	
		  I do have one favor to ask of you before I go.  Since my original email as

well as two respondents' emails have both the offensive language AND my

business information in the salutation, may I ask of you to go into whatever

mechanism you have to un-archive them?  It reflects badly on my associated

partner company, Xilinx, and un-archiving would be greatly appreciated here.

If I have to do something extra myself to solve this problem, then please

let me know.


	


     You would have to contact Matt Dralle about that.

     He holds the "keys to the system" as it were. No

     doubt there is a way to get into the files and

     work on them.

 	  Quote: 	
		  Thank you so much and have a nice Thanksgiving season.


	




     . . . and you too sir!



     Bob . . .

Display posts from previous:

	Matronics Email Lists Forum Index -> AeroElectric-List	All times are GMT - 8 Hours
Page 1 of 1

Jump to:

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum