Matronics Email Lists :: View topic - Handling Characteristics of a Pacer vs. Kitfox

Matronics Email Lists
Web Forum Interface to the Matronics Email Lists

Get Email Distribution Too! FAQ Search Memberlist Usergroups Register

Profile Log in to check your private messages Log in

Handling Characteristics of a Pacer vs. Kitfox

Matronics Email Lists Forum Index -> Kitfox-List

View previous topic :: View next topic

Author Message

GENTRYLL(at)aol.com
Guest

Posted: Thu Nov 30, 2006 7:24 am Post subject: Handling Characteristics of a Pacer vs. Kitfox

I earned my taildragger endorsement in a conventional gear Cessna  150.  I transitioned to my Kitfox that I built with no additional training,  just a lot of reading.  It wasn't too pretty at first, but with a little  advice from some of you guys, it looks a lot better now.  I am almost  finished with a Wagabond which  started out life as a Pacer.  It will  handle  like a Pacer with a stick instead of a yoke.  The question is  "Will the Pacer be more difficult or less difficult than the Kitfox to handle on  the ground.  I know the mains are further apart and the length from the  mains to the tailwheel is longer so those are positive for easier  handling.  On the downside, the Pacer will be on the ground longer than the  Kitfox due to primarily weight and design.

  [quote][b]

- The Matronics Kitfox-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Kitfox-List

Display posts from previous:

	Matronics Email Lists Forum Index -> Kitfox-List	All times are GMT - 8 Hours
Page 1 of 1

Jump to:

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum