pedfly60(at)yahoo.com
Guest
|
 Posted: Mon Dec 04, 2006 5:28 am Post subject: Zenith-List Digest: 21 Msgs - 12/03/06 |
 |
|
Please remove me from the zenith list. Thank you, Mike Pedri
Zenith-List Digest Server <zenith-list(at)matronics.com> wrote: [quote]*
==================================================
Online Versions of Today's List Digest Archive
==================================================
Today's complete Zenith-List Digest can also be found in either of the
two Web Links listed below. The .html file includes the Digest formatted
in HTML for viewing with a web browser and features Hyperlinked Indexes
and Message Navigation. The .txt file includes the plain ASCII version
of the Zenith-List Digest and can be viewed with a generic text editor
such as Notepad or with a web browser.
HTML Version:
http://www.matronics.com/digest/digestview.php?Style=82701&View=html&Chapter 06-12-03&Archive=Zenith
Text Version:
http://www.matronics.com/digest/digestview.php?Style=82701&View=txt&Chapter 06-12-03&Archive=Zenith
================================================
EMail Version of Today's List Digest Archive
================================================
----------------------------------------------------------
Zenith-List Digest Archive
---
Total Messages Posted Sun 12/03/06: 21
----------------------------------------------------------
Today's Message Index:
----------------------
1. 06:18 AM - Re: the Dew Knot Arc syndrome (Edward Moody II)
2. 07:01 AM - Re: 601XL - Engine out / Glide Experience (Gary Boothe)
3. 07:33 AM - Re: N601XT flight photos (LarryMcFarland)
4. 07:46 AM - Fw: Too picky? (Bill Naumuk)
5. 07:54 AM - Re: N601XT flight photos (Bill Naumuk)
6. 07:58 AM - Re: N601XT flight photos (Jeff)
7. 08:47 AM - Re: Zenith-List Digest: 21 Msgs - 12/02/06 (John Anderson)
8. 08:53 AM - Fuel systems (MaxNr(at)aol.com)
9. 09:28 AM - stick switches and fuel selector valve (john butterfield)
10. 09:42 AM - Re: stick switches and fuel selector valve (Craig Payne)
11. 11:28 AM - Re: stick switches and fuel selector valve (LarryMcFarland)
12. 11:34 AM - 801 Cargo Pod (Dave Ruddiman)
13. 11:42 AM - Re: 601XL - Engine out / Glide Experience (Dave Thompson)
14. 11:53 AM - Re: stick switches and fuel selector valve (Edward Moody II)
15. 04:07 PM - Re: stick switches and fuel selector valve (JAPhillipsGA(at)aol.com)
16. 04:07 PM - Re: stick switches and fuel selector valve (RURUNY(at)aol.com)
17. 05:35 PM - Re: stick switches and fuel selector valve (Juan Vega)
18. 05:45 PM - Re: Fw: Too picky? (Tim & Diane Shankland)
19. 06:37 PM - Re: N601XT flight photos (Brandon Tucker)
20. 09:49 PM - 701 POH (Tebenkof(at)aol.com)
21. 10:24 PM - Re: 701 POH (Dave Ruddiman)
________________________________ Message 1 _____________________________________
Time: 06:18:57 AM PST US
From: "Edward Moody II"
Subject: Re: the Dew Knot Arc syndrome
Yep Zed, I agree. We have to hope that the rest of the world does
descend into the dementia that consumes the American court system such
that everybody who gets his or her feelings hurt or offended is
devastated by the experince and requires some restitution. I get ticked
off about something almost every day but I haven't asked for or received
any compensation for it. Sort the wheat from the chaff and all that.
Here's to brotherhood, thick skin (not to mention my thick head), and a
hearty Hi Ho Do Not Archive!!!! The lone builder rides again,
Ed
________________________________ Message 2 _____________________________________
Time: 07:01:07 AM PST US
From: "Gary Boothe"
Subject: RE: 601XL - Engine out / Glide Experience
Dave,
Ditto....Bill talked me into scratch building after I had purchased tail and
wing kits. I am saving thousands of $$ just on the Center Section! The best
part though, there is ENORMOUS satisfaction from making every part!
Good luck with your project,
Gary Boothe
Cool, CA
601 HDSTD, WW Conversion 90% done,
Tail done, wings done, working on c-section
Bill Naumuk wrote:
Dave-
Scratch build. Ask around the list- sooner or later, you wind up scratch
building something anyway, so don't use lack of funds as an excuse. You're
not the first! For a couple hundred bucks worth of sheet stock, you can
build your stab. At least you're making progress!.....
Bill Naumuk
HDS Fuselage
Townville, Pa
Dave Thompson
dave.thompson(at)verizon.net
Westminster, CA
601XL rudder workshop, Corvair engine in parts and no money for a
________________________________ Message 3 _____________________________________
Time: 07:33:55 AM PST US
From: LarryMcFarland
Subject: Re: N601XT flight photos
Congratulations Brandon,
You're going to be an easy one to see with that paint scheme.
Nice airplane. Well done.
Larry McFarland - 601HDS at www.macsmachine.com
Brandon Tucker wrote:
| Quote: | Gents,
For those interested, I put some pictures on the net of my flight
this week. The thumbnails go to slightly larger pics.
http://mcgirt.net/~ars2006/ars2006/Desktop.html
VR/
Brandon Tucker
Do not archive
*
================================
*
|
________________________________ Message 4 _____________________________________
Time: 07:46:16 AM PST US
From: "Bill Naumuk"
Subject: Fw: Too picky?
[quote] Carlos-
I found that premade flannel bonnets work much better than anything
else with my rotary polisher and the rough grits. Now I'm down to the
final S compound and flannel tucked in under the elastic of a wool bonnet
and there are certain spots that defy a final shine. The flannel loads up
in no time, too. I scrap bonnets/swatches when they load up- Ma won't hear
of putting them in HER washing machine! Contamination? After the C stage,
I wiped the surface down with alcohol and paper towels to remove the
excess.
I'm starting to wonder if my problem is temperature related. My shop is
heated with a ventless propane garage heater, but I'm reluctant to leave
it burning when I'm not working. Maybe the aluminum is still cold-soaked
even though the ambient temperature is comfortable.
Have you noticed anything temperature related? I'll admit that with
hunting season, getting ready for winter, and routine maintenance around
the house I haven't been able to get my 13hrs a week in on the project but
I've been polishing the C section since October!
Bill Naumuk
HDS Fuselage
Townville, Pa
---
| | - The Matronics Zenith-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?Zenith-List |
|
|
|
Get Email Distribution Too!
FAQ
Search
Memberlist
Usergroups
Register
Profile
Log in to check your private messages
Log in
