Matronics Email Lists :: View topic - Electronics Intl MVP-50 Dsub 37's connectors

Matronics Email Lists
Web Forum Interface to the Matronics Email Lists

Get Email Distribution Too! FAQ Search Memberlist Usergroups Register

Profile Log in to check your private messages Log in

Electronics Intl MVP-50 Dsub 37's connectors

Matronics Email Lists Forum Index -> AeroElectric-List

View previous topic :: View next topic

Author Message

nuckollsr(at)cox.net
Guest

Posted: Thu Feb 15, 2007 4:08 pm Post subject: Electronics Intl MVP-50 Dsub 37's connectors

At 11:55 AM 2/15/2007 -0600, you wrote:



 	  Quote: 	
		  



Is there any problem with breaking a thermocouple wire at the firewall 

with a bulkhead connector?


	


   Not at all . . . with reservations. As you pass from thermocouple

   wire to (stuff) to thermocouple wire, you need to be sure that

   you do exactly the same thing to the other paired thermocouple

   conductor.



   I've used a LOT of d-sub connectors to make handy breaks in bundles

   containing thermocouple wires. Use the machined pins to get a really

   good grip on the thermocouple wire and it will be fine.



   Yes, you're introducing "foreign" alloys into the system however,

   the "new" thermocouples are always in pairs and co-located so that

   their effects are equal-opposite and cancel out.



   Bob . . .

- The Matronics AeroElectric-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?AeroElectric-List

Display posts from previous:

	Matronics Email Lists Forum Index -> AeroElectric-List	All times are GMT - 8 Hours
Page 1 of 1

Jump to:

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum