 |
Matronics Email Lists Web Forum Interface to the Matronics Email Lists
|
View previous topic :: View next topic |
Author |
Message |
craig(at)craigandjean.com Guest
|
Posted: Wed Apr 01, 2009 5:47 pm Post subject: Otiker clamps and crimping tool (was Re: Vapor Lock and E-10 |
|
|
Roger, where do you get your Otiker clamps and tools?
I like them but unless I carry the (large and heavy) crimping tool in the
plane field repairs look difficult.
-- Craig
| - The Matronics RotaxEngines-List Email Forum - | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?RotaxEngines-List |
|
|
|
Back to top |
|
 |
Roger Lee
Joined: 10 Jan 2006 Posts: 1464 Location: Tucson, Az.
|
Posted: Wed Apr 01, 2009 9:57 pm Post subject: Re: Otiker clamps and crimping tool (was Re: Vapor Lock and |
|
|
Here is just one link to get Otiker clamps and pliers. I usually just buy the kit with the pliers and an assortment of single ear band clamps. Then when I need replacement clamps I order them separately.
There are other websites that have Otiker clamps and pliers. For just an emergency field repair I only carry the worm drive clamps so it will fit different hose applications. When you get home you replace it with the proper band clamp.
http://chadstoolbox.com/index.asp?PageAction=VIEWCATS&Category=521
| - The Matronics RotaxEngines-List Email Forum - | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?RotaxEngines-List |
|
_________________ Roger Lee
Tucson, Az.
Rotax Instructor & Rotax IRC
Light Sport Repairman
Home 520-574-1080 TRY HOME FIRST
Cell 520-349-7056 |
|
Back to top |
|
 |
ptag.dev(at)tiscali.co.uk Guest
|
Posted: Thu Apr 02, 2009 1:08 am Post subject: Otiker clamps and crimping tool (was Re: Vapor Lock and E-10 |
|
|
Ivor Phillips(G-IVER)put me onto a Halfords(UK)part made by Laser
Engineering, a cable operated remote applicator to work spring
clips,(part No. 4024) No need for fingers and hands to do the gynecology
thing. I had to slightly modify it for the large water hose clips. See:-
www.lasertools.co.uk
It is covered by US Patent 6,370,985,B1. and described as Hose Clamp
Pliers, Long Reach.
I modified mine by increasing the grab lip depth to 1/4" which then
caters for the larger diameter spring clip.
Regards
Bob Harrison G-PTAG
--
| - The Matronics RotaxEngines-List Email Forum - | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?RotaxEngines-List |
|
|
|
Back to top |
|
 |
hgmckay
Joined: 23 May 2006 Posts: 397
|
Posted: Thu Apr 02, 2009 11:15 am Post subject: Otiker clamps and crimping tool (was Re: Vapor Lock and E-10 |
|
|
Roger:
I fly an Allegro 2000 ELSA with a 912UL engine, and I use normal screw/gear
type clamps on my fuel lines without having any problems. The lines are fire
sleeved. Each clamp screw head is color marked after tightening so to
indicate if any loosening of the screw has occurred. These are checked prior
to each flight. I have been flying this plane for about 2 years and I have
not had a screw clamp loosen. In your opinion, what justifies the use of the
Otiker type clamps (two clamp points per clamp) over the type I am using?
Also getting access to the numerous Otiker double clamp points on my plane
with the pliers would be very difficult, if not impossible at some points,
on the small 912 engine that is congested with coolant lines, fuel lines,
wires, and other devices on the engine.
Hugh McKay
Allegro 2000
Rotax 912UL
--
| - The Matronics RotaxEngines-List Email Forum - | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?RotaxEngines-List |
|
|
|
Back to top |
|
 |
Roger Lee
Joined: 10 Jan 2006 Posts: 1464 Location: Tucson, Az.
|
Posted: Thu Apr 02, 2009 3:15 pm Post subject: Re: Otiker clamps and crimping tool (was Re: Vapor Lock and |
|
|
Hi Hugh,
Ever seen a Rotax engine from the factory with screw clamps on any fuel line or fire sleeve?
I don't use a double eared Otiker clamps. I only use the single ear clamp, much easier to handle especially in tight areas. I'll have to find and get back to you on the publication where they want band clamps and not screw clamps on fuel lines and fire sleeve. I keep my resource books at the hanger. This is also taught in newer Rotax classes.
| - The Matronics RotaxEngines-List Email Forum - | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?RotaxEngines-List |
|
_________________ Roger Lee
Tucson, Az.
Rotax Instructor & Rotax IRC
Light Sport Repairman
Home 520-574-1080 TRY HOME FIRST
Cell 520-349-7056 |
|
Back to top |
|
 |
|
|
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum You cannot attach files in this forum You can download files in this forum
|
Powered by phpBB © 2001, 2005 phpBB Group
|