Matronics Email Lists :: View topic

Matronics Email Lists
Web Forum Interface to the Matronics Email Lists

Get Email Distribution Too! FAQ Search Memberlist Usergroups Register

Profile Log in to check your private messages Log in

Cylinder head Temps

Matronics Email Lists Forum Index -> Zenith601-List

View previous topic :: View next topic

Author Message

BobbyPaulk(at)comcast.net
Guest

Posted: Wed Oct 13, 2010 6:27 am Post subject: Cylinder head Temps

List,

I have determined that the CHT's can be changed about 15 to 30 degrees ( depending on throttle position ) by having the nose wheel pant installed. This was not done scientifically. I flew with the wheel pant off and marked the cylinder head temps at 3 different settings. Then with the whel pant on at the same altitude and same throttle settings. Each time giving the temps time to stabilize. This is especially true of the rear cylinders. I believe the nose wheel with out the pant causes turbulence at the cowl opening and disturbs flow raising the temps.

Has anyone experienced this. 

Still trying to get back 2 cylinders below 300 deg. I am down to 310 ~ 325. 



Bobby 

102 hrs



DO NOT ARCHIVE



 [quote][b]

- The Matronics Zenith601-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Zenith601-List

Display posts from previous:

	Matronics Email Lists Forum Index -> Zenith601-List	All times are GMT - 8 Hours
Page 1 of 1

Jump to:

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum