Matronics Email Lists Forum Index Matronics Email Lists
Web Forum Interface to the Matronics Email Lists
 
 Get Email Distribution Too!Get Email Distribution Too!    FAQFAQ   SearchSearch   MemberlistMemberlist   UsergroupsUsergroups   RegisterRegister 
 ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 

FAA Inspection for New AW Certificates.

 
Post new topic   Reply to topic    Matronics Email Lists Forum Index -> Zenith-List
View previous topic :: View next topic  
Author Message
Gig Giacona



Joined: 10 Jan 2006
Posts: 1416
Location: El Dorado Arkansas USA

PostPosted: Mon Apr 20, 2009 5:22 am    Post subject: FAA Inspection for New AW Certificates. Reply with quote

I contacted the EAA this morning to see what they knew about the issue. The person I talked with had not heard of any decision to suspend granting AW certificates for Experimental 601XLs.

He agreed that if such were happening it would be a precedent setting move on the FAA's part and that the EAA would be quite concerned with such an action. He or someone in EAA Government relations office will make calls today to the FAA and follow up and see what they can find out. I told him I'd give him a call Tuesday morning for an update.

I will, of course, let the forum know any info I receive.


- The Matronics Zenith-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Zenith-List

_________________
W.R. "Gig" Giacona
601XL Under Construction
See my progress at www.peoamerica.net/N601WR
Back to top
View user's profile Send private message Send e-mail Visit poster's website
Gig Giacona



Joined: 10 Jan 2006
Posts: 1416
Location: El Dorado Arkansas USA

PostPosted: Mon Apr 20, 2009 3:28 pm    Post subject: Re: FAA Inspection for New AW Certificates. Reply with quote

Some more information.

I spoke today with the DAR that will be doing the inspection on my plane when the time comes. He says that he has been notified by the FAA to check the cable tension on all 601XLs he inspects and to make sure there is a log entry of the tension as measured by the builder and that that the device used to measure the tension was properly calibrated.

So there is not any sort of FAA wide ban in the inspection and certification of EXP-HB 601XLs.


- The Matronics Zenith-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Zenith-List

_________________
W.R. "Gig" Giacona
601XL Under Construction
See my progress at www.peoamerica.net/N601WR
Back to top
View user's profile Send private message Send e-mail Visit poster's website
annken100



Joined: 15 Nov 2007
Posts: 62

PostPosted: Tue Apr 21, 2009 4:17 am    Post subject: Re: FAA Inspection for New AW Certificates. Reply with quote

Gig,
Thank you for taking the initiative to call the EAA. I was thinking of doing the same thing. It seems to me that a fleet-wide ban on all 601 XL's including amateur built planes would set a precedence that would affect all home builders not just those building 601's.

On a positive note, Louis Kantor reported on zenith.aero that he just received his airworthiness certificate. For those on this list that were denied inspections, I would suggest finding another inspector or contacting the FAA to get some clarification and guidance.

Ken Pavlou


- The Matronics Zenith-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Zenith-List

_________________
601 XL / Corvair
Back to top
View user's profile Send private message
Gig Giacona



Joined: 10 Jan 2006
Posts: 1416
Location: El Dorado Arkansas USA

PostPosted: Tue Apr 21, 2009 6:50 am    Post subject: Re: FAA Inspection for New AW Certificates. Reply with quote

I spoke again this morning with my contact at the EAA. First I want to give the EAA a big 'atta boy for jumping on the issue.

The EAA has confirmed what the DAR I spoke to yesterday said and this is not a nation wide FAA move but is limited to one FSDO office. They are in contact with that FSDO office and feel that it will be cleared up shortly.

If you are a builder in the US and not member of the EAA you need to be. They are there to help us and they do respond when called.


- The Matronics Zenith-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Zenith-List

_________________
W.R. "Gig" Giacona
601XL Under Construction
See my progress at www.peoamerica.net/N601WR
Back to top
View user's profile Send private message Send e-mail Visit poster's website
Display posts from previous:   
Post new topic   Reply to topic    Matronics Email Lists Forum Index -> Zenith-List All times are GMT - 8 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum


Powered by phpBB © 2001, 2005 phpBB Group